Now that T349244 is completed, we can move on decommissioning old eqiad cp hosts: cp1075-1090
cp1075
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1076
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1077
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1078
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1079
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1080
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1081
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1082
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1083
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1084
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1085
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1086
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1087
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1088
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1089
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag
cp1090
Steps for service owner:
- [] all system services confirmed offline from production use
- [] remove system from all lvs/pybal active configuration
- [] any service group puppet/hiera/dsh config removed
- [] remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below.
- [] login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer.
- [] remove all remaining puppet references and all host entries in the puppet repo
- [] reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server
End service owner steps / Begin DC-Ops team steps:
- system disks removed (by onsite)
- determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned.
- IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline
- IF DECOM: mgmt dns entries removed.
- IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag