Page MenuHomePhabricator
Files F55409883

dmesg.txt
Eevans (Eric Evans)
Actions

Authored By
Eevans
Jun 17 2024, 4:33 PM
Size
139 KB
Referenced Files
None
Subscribers
None

dmesg.txt
View Options

[Jun13 18:38] microcode: microcode updated early to revision 0x5003605, date = 2023-07-28
[ +0.000000] Linux version 5.10.0-30-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.218-1 (2024-06-01)
[ +0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-30-amd64 root=UUID=56485174-9364-48e1-9955-f61345f29fd2 ro console=ttyS1,115200n8 raid0.default_layout=2 elevator=deadline
[ +0.000000] BIOS-provided physical RAM map:
[ +0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ +0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ +0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000004ff74fff] usable
[ +0.000000] BIOS-e820: [mem 0x000000004ff75000-0x000000005013bfff] reserved
[ +0.000000] BIOS-e820: [mem 0x000000005013c000-0x00000000683fefff] usable
[ +0.000000] BIOS-e820: [mem 0x00000000683ff000-0x000000006e3fefff] reserved
[ +0.000000] BIOS-e820: [mem 0x000000006e3ff000-0x000000006f1fefff] ACPI NVS
[ +0.000000] BIOS-e820: [mem 0x000000006f1ff000-0x000000006f7fefff] ACPI data
[ +0.000000] BIOS-e820: [mem 0x000000006f7ff000-0x000000006f7fffff] usable
[ +0.000000] BIOS-e820: [mem 0x000000006f800000-0x000000008fffffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fec80000-0x00000000fed00fff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ +0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ +0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000207fffffff] usable
[ +0.000000] NX (Execute Disable) protection: active
[ +0.000000] SMBIOS 3.2 present.
[ +0.000000] DMI: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.9.3 09/23/2020
[ +0.000000] tsc: Detected 2400.000 MHz processor
[ +0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ +0.000003] e820: remove [mem 0x000a0000-0x000fffff] usable
[ +0.000009] last_pfn = 0x2080000 max_arch_pfn = 0x400000000
[ +0.000004] MTRR default type: uncachable
[ +0.000001] MTRR fixed ranges enabled:
[ +0.000001] 00000-9FFFF write-back
[ +0.000001] A0000-BFFFF uncachable
[ +0.000001] C0000-FFFFF write-protect
[ +0.000001] MTRR variable ranges enabled:
[ +0.000001] 0 base 000000000000 mask 3FE000000000 write-back
[ +0.000001] 1 base 002000000000 mask 3FFF80000000 write-back
[ +0.000002] 2 base 000080000000 mask 3FFF80000000 uncachable
[ +0.000000] 3 base 00007F000000 mask 3FFFFF000000 uncachable
[ +0.000001] 4 disabled
[ +0.000001] 5 disabled
[ +0.000000] 6 disabled
[ +0.000001] 7 disabled
[ +0.000000] 8 disabled
[ +0.000001] 9 disabled
[ +0.000735] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ +0.001212] e820: update [mem 0x7f000000-0xffffffff] usable ==> reserved
[ +0.000006] last_pfn = 0x6f800 max_arch_pfn = 0x400000000
[ +0.008318] Using GB pages for direct mapping
[ +0.000478] RAMDISK: [mem 0x33831000-0x35c0ffff]
[ +0.000005] ACPI: Early table checksum verification disabled
[ +0.000005] ACPI: RSDP 0x00000000000FE320 000024 (v02 DELL )
[ +0.000004] ACPI: XSDT 0x000000006F3A0188 0000FC (v01 DELL PE_SC3 00000000 01000013)
[ +0.000007] ACPI: FACP 0x000000006F7F9000 000114 (v06 DELL PE_SC3 00000000 DELL 00000001)
[ +0.000006] ACPI: DSDT 0x000000006F501000 2E81B0 (v02 DELL PE_SC3 00000003 DELL 00000001)
[ +0.000004] ACPI: FACS 0x000000006EEEE000 000040
[ +0.000003] ACPI: SSDT 0x000000006F7FC000 00046C (v02 INTEL ADDRXLAT 00000001 INTL 20180508)
[ +0.000004] ACPI: WD__ 0x000000006F7FB000 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ +0.000003] ACPI: SLIC 0x000000006F7FA000 000024 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ +0.000004] ACPI: HPET 0x000000006F7F8000 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ +0.000003] ACPI: APIC 0x000000006F7F6000 0016DE (v04 DELL PE_SC3 00000000 DELL 00000001)
[ +0.000004] ACPI: MCFG 0x000000006F7F5000 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ +0.000003] ACPI: MIGT 0x000000006F7F4000 000040 (v01 DELL PE_SC3 00000000 DELL 00000001)
[ +0.000003] ACPI: MSCT 0x000000006F7F3000 000090 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ +0.000004] ACPI: PCAT 0x000000006F7F2000 000088 (v02 DELL PE_SC3 00000002 DELL 00000001)
[ +0.000003] ACPI: PCCT 0x000000006F7F1000 00006E (v01 DELL PE_SC3 00000002 DELL 00000001)
[ +0.000004] ACPI: RASF 0x000000006F7F0000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ +0.000003] ACPI: SLIT 0x000000006F7EF000 00042C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ +0.000004] ACPI: SRAT 0x000000006F7EC000 002D30 (v03 DELL PE_SC3 00000002 DELL 00000001)
[ +0.000003] ACPI: SVOS 0x000000006F7EB000 000032 (v01 DELL PE_SC3 00000000 DELL 00000001)
[ +0.000004] ACPI: WSMT 0x000000006F7EA000 000028 (v01 DELL PE_SC3 00000000 DELL 00000001)
[ +0.000003] ACPI: OEM4 0x000000006F453000 0AD1C1 (v02 INTEL CPU CST 00003000 INTL 20180508)
[ +0.000004] ACPI: OEM1 0x000000006F425000 02D971 (v02 INTEL CPU EIST 00003000 INTL 20180508)
[ +0.000004] ACPI: OEM2 0x000000006F3F2000 0320C9 (v02 INTEL CPU HWP 00003000 INTL 20180508)
[ +0.000003] ACPI: SSDT 0x000000006F3BA000 037465 (v02 INTEL SSDT PM 00004000 INTL 20180508)
[ +0.000004] ACPI: SSDT 0x000000006F7FD000 000C94 (v02 DELL PE_SC3 00000000 DELL 00000001)
[ +0.000004] ACPI: SSDT 0x000000006F3B6000 00357F (v02 INTEL SpsNm 00000002 INTL 20180508)
[ +0.000003] ACPI: SPCR 0x000000006F3B5000 000050 (v02 00000000 00000000)
[ +0.000004] ACPI: HEST 0x000000006F3B4000 00017C (v01 DELL PE_SC3 00000002 DELL 00000001)
[ +0.000004] ACPI: BERT 0x000000006F3B3000 000030 (v01 DELL PE_SC3 00000002 DELL 00000001)
[ +0.000003] ACPI: ERST 0x000000006F3B2000 000230 (v01 DELL PE_SC3 00000002 DELL 00000001)
[ +0.000004] ACPI: EINJ 0x000000006F3B1000 000150 (v01 DELL PE_SC3 00000002 DELL 00000001)
[ +0.000003] ACPI: Reserving FACP table memory at [mem 0x6f7f9000-0x6f7f9113]
[ +0.000002] ACPI: Reserving DSDT table memory at [mem 0x6f501000-0x6f7e91af]
[ +0.000001] ACPI: Reserving FACS table memory at [mem 0x6eeee000-0x6eeee03f]
[ +0.000001] ACPI: Reserving SSDT table memory at [mem 0x6f7fc000-0x6f7fc46b]
[ +0.000001] ACPI: Reserving WD__ table memory at [mem 0x6f7fb000-0x6f7fb133]
[ +0.000002] ACPI: Reserving SLIC table memory at [mem 0x6f7fa000-0x6f7fa023]
[ +0.000001] ACPI: Reserving HPET table memory at [mem 0x6f7f8000-0x6f7f8037]
[ +0.000001] ACPI: Reserving APIC table memory at [mem 0x6f7f6000-0x6f7f76dd]
[ +0.000001] ACPI: Reserving MCFG table memory at [mem 0x6f7f5000-0x6f7f503b]
[ +0.000001] ACPI: Reserving MIGT table memory at [mem 0x6f7f4000-0x6f7f403f]
[ +0.000001] ACPI: Reserving MSCT table memory at [mem 0x6f7f3000-0x6f7f308f]
[ +0.000001] ACPI: Reserving PCAT table memory at [mem 0x6f7f2000-0x6f7f2087]
[ +0.000001] ACPI: Reserving PCCT table memory at [mem 0x6f7f1000-0x6f7f106d]
[ +0.000002] ACPI: Reserving RASF table memory at [mem 0x6f7f0000-0x6f7f002f]
[ +0.000001] ACPI: Reserving SLIT table memory at [mem 0x6f7ef000-0x6f7ef42b]
[ +0.000001] ACPI: Reserving SRAT table memory at [mem 0x6f7ec000-0x6f7eed2f]
[ +0.000001] ACPI: Reserving SVOS table memory at [mem 0x6f7eb000-0x6f7eb031]
[ +0.000001] ACPI: Reserving WSMT table memory at [mem 0x6f7ea000-0x6f7ea027]
[ +0.000001] ACPI: Reserving OEM4 table memory at [mem 0x6f453000-0x6f5001c0]
[ +0.000002] ACPI: Reserving OEM1 table memory at [mem 0x6f425000-0x6f452970]
[ +0.000001] ACPI: Reserving OEM2 table memory at [mem 0x6f3f2000-0x6f4240c8]
[ +0.000001] ACPI: Reserving SSDT table memory at [mem 0x6f3ba000-0x6f3f1464]
[ +0.000001] ACPI: Reserving SSDT table memory at [mem 0x6f7fd000-0x6f7fdc93]
[ +0.000002] ACPI: Reserving SSDT table memory at [mem 0x6f3b6000-0x6f3b957e]
[ +0.000001] ACPI: Reserving SPCR table memory at [mem 0x6f3b5000-0x6f3b504f]
[ +0.000001] ACPI: Reserving HEST table memory at [mem 0x6f3b4000-0x6f3b417b]
[ +0.000001] ACPI: Reserving BERT table memory at [mem 0x6f3b3000-0x6f3b302f]
[ +0.000002] ACPI: Reserving ERST table memory at [mem 0x6f3b2000-0x6f3b222f]
[ +0.000001] ACPI: Reserving EINJ table memory at [mem 0x6f3b1000-0x6f3b114f]
[ +0.000011] ACPI: Local APIC address 0xfee00000
[ +0.000046] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ +0.000002] SRAT: PXM 1 -> APIC 0x20 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x08 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x28 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x22 -> Node 1
[ +0.000002] SRAT: PXM 0 -> APIC 0x06 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x26 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x24 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x18 -> Node 0
[ +0.000002] SRAT: PXM 1 -> APIC 0x38 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x10 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x30 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x16 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x36 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x12 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x32 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x14 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x34 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x21 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x09 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x29 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x23 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x07 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x27 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x25 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x19 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x39 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x11 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x31 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x17 -> Node 0
[ +0.000002] SRAT: PXM 1 -> APIC 0x37 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x13 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x33 -> Node 1
[ +0.000001] SRAT: PXM 0 -> APIC 0x15 -> Node 0
[ +0.000001] SRAT: PXM 1 -> APIC 0x35 -> Node 1
[ +0.000017] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
[ +0.000001] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x107fffffff]
[ +0.000002] ACPI: SRAT: Node 1 PXM 1 [mem 0x1080000000-0x207fffffff]
[ +0.000008] NUMA: Initialized distance table, cnt=2
[ +0.000002] NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x107fffffff] -> [mem 0x00000000-0x107fffffff]
[ +0.000012] NODE_DATA(0) allocated [mem 0x107ffd6000-0x107fffffff]
[ +0.000027] NODE_DATA(1) allocated [mem 0x207ffd5000-0x207fffefff]
[ +0.000437] Zone ranges:
[ +0.000001] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ +0.000002] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ +0.000002] Normal [mem 0x0000000100000000-0x000000207fffffff]
[ +0.000002] Device empty
[ +0.000002] Movable zone start for each node
[ +0.000002] Early memory node ranges
[ +0.000002] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ +0.000001] node 0: [mem 0x0000000000100000-0x000000004ff74fff]
[ +0.000002] node 0: [mem 0x000000005013c000-0x00000000683fefff]
[ +0.000001] node 0: [mem 0x000000006f7ff000-0x000000006f7fffff]
[ +0.000001] node 0: [mem 0x0000000100000000-0x000000107fffffff]
[ +0.000006] node 1: [mem 0x0000001080000000-0x000000207fffffff]
[ +0.000008] Initmem setup node 0 [mem 0x0000000000001000-0x000000107fffffff]
[ +0.000002] On node 0 totalpages: 16679381
[ +0.000001] DMA zone: 64 pages used for memmap
[ +0.000001] DMA zone: 21 pages reserved
[ +0.000001] DMA zone: 3996 pages, LIFO batch:0
[ +0.000001] DMA32 zone: 6601 pages used for memmap
[ +0.000001] DMA32 zone: 422457 pages, LIFO batch:63
[ +0.000001] Normal zone: 253952 pages used for memmap
[ +0.000000] Normal zone: 16252928 pages, LIFO batch:63
[ +0.000001] Initmem setup node 1 [mem 0x0000001080000000-0x000000207fffffff]
[ +0.000002] On node 1 totalpages: 16777216
[ +0.000000] Normal zone: 262144 pages used for memmap
[ +0.000001] Normal zone: 16777216 pages, LIFO batch:63
[ +0.000003] On node 0, zone DMA: 1 pages in unavailable ranges
[ +0.000041] On node 0, zone DMA: 99 pages in unavailable ranges
[ +0.004212] On node 0, zone DMA32: 455 pages in unavailable ranges
[ +0.000385] On node 0, zone DMA32: 29696 pages in unavailable ranges
[ +0.000401] On node 0, zone Normal: 2048 pages in unavailable ranges
[ +0.000517] ACPI: PM-Timer IO Port: 0x508
[ +0.000002] ACPI: Local APIC address 0xfee00000
[ +0.000021] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
[ +0.000004] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ +0.000019] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ +0.000005] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-31
[ +0.000004] IOAPIC[2]: apic_id 10, version 32, address 0xfec08000, GSI 32-39
[ +0.000005] IOAPIC[3]: apic_id 11, version 32, address 0xfec10000, GSI 40-47
[ +0.000004] IOAPIC[4]: apic_id 12, version 32, address 0xfec18000, GSI 48-55
[ +0.000005] IOAPIC[5]: apic_id 15, version 32, address 0xfec20000, GSI 72-79
[ +0.000005] IOAPIC[6]: apic_id 16, version 32, address 0xfec28000, GSI 80-87
[ +0.000005] IOAPIC[7]: apic_id 17, version 32, address 0xfec30000, GSI 88-95
[ +0.000005] IOAPIC[8]: apic_id 18, version 32, address 0xfec38000, GSI 96-103
[ +0.000006] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ +0.000002] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ +0.000002] ACPI: IRQ0 used by override.
[ +0.000002] ACPI: IRQ9 used by override.
[ +0.000004] Using ACPI (MADT) for SMP configuration information
[ +0.000002] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ +0.000004] ACPI: SPCR: console: uart,io,0x2f8,115200
[ +0.000002] TSC deadline timer available
[ +0.000002] smpboot: Allowing 40 CPUs, 0 hotplug CPUs
[ +0.000025] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ +0.000003] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ +0.000002] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ +0.000002] PM: hibernation: Registered nosave memory: [mem 0x4ff75000-0x5013bfff]
[ +0.000003] PM: hibernation: Registered nosave memory: [mem 0x683ff000-0x6e3fefff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x6e3ff000-0x6f1fefff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x6f1ff000-0x6f7fefff]
[ +0.000003] PM: hibernation: Registered nosave memory: [mem 0x6f800000-0x8fffffff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfcffffff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec7ffff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfec80000-0xfed00fff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
[ +0.000001] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ +0.000002] [mem 0x90000000-0xfcffffff] available for PCI devices
[ +0.000001] Booting paravirtualized kernel on bare hardware
[ +0.000004] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ +0.004266] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:40 nr_cpu_ids:40 nr_node_ids:2
[ +0.003159] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
[ +0.000009] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
[ +0.000003] pcpu-alloc: [0] 00 02 04 06 08 10 12 14 [0] 16 18 20 22 24 26 28 30
[ +0.000010] pcpu-alloc: [0] 32 34 36 38 -- -- -- -- [1] 01 03 05 07 09 11 13 15
[ +0.000009] pcpu-alloc: [1] 17 19 21 23 25 27 29 31 [1] 33 35 37 39 -- -- -- --
[ +0.000051] Built 2 zonelists, mobility grouping on. Total pages: 32933815
[ +0.000002] Policy zone: Normal
[ +0.000002] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-30-amd64 root=UUID=56485174-9364-48e1-9955-f61345f29fd2 ro console=ttyS1,115200n8 raid0.default_layout=2 elevator=deadline
[ +0.000069] Kernel parameter elevator= does not have any effect anymore.
Please use sysfs to set IO scheduler for individual devices.
[ +0.000008] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ +0.000001] printk: log_buf_len total cpu_extra contributions: 159744 bytes
[ +0.000001] printk: log_buf_len min size: 131072 bytes
[ +0.000808] printk: log_buf_len: 524288 bytes
[ +0.000001] printk: early log buf free: 114648(87%)
[ +0.000407] mem auto-init: stack:off, heap alloc:on, heap free:off
[ +0.051383] Memory: 1865344K/133826388K available (12295K kernel code, 2537K rwdata, 7592K rodata, 2672K init, 17708K bss, 2257900K reserved, 0K cma-reserved)
[ +0.000840] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=40, Nodes=2
[ +0.000069] ftrace: allocating 36669 entries in 144 pages
[ +0.022260] ftrace: allocated 144 pages with 2 groups
[ +0.000867] rcu: Hierarchical RCU implementation.
[ +0.000002] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=40.
[ +0.000002] Rude variant of Tasks RCU enabled.
[ +0.000001] Tracing variant of Tasks RCU enabled.
[ +0.000002] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ +0.000001] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=40
[ +0.004177] NR_IRQS: 524544, nr_irqs: 2104, preallocated irqs: 16
[ +0.000314] random: crng init done
[ +0.004366] Console: colour VGA+ 80x25
[ +1.458448] printk: console [ttyS1] enabled
[ +0.004270] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ +0.011183] ACPI: Core revision 20200925
[ +0.007144] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ +0.009062] APIC: Switch to symmetric I/O mode setup
[ +0.005181] x2apic: IRQ remapping doesn't support X2APIC mode
[ +0.005857] Switched APIC routing to physical flat.
[ +0.005820] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ +0.023030] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
[ +0.010492] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=9600000)
[ +0.004018] x86/cpu: VMX (outside TXT) disabled by BIOS
[ +0.004050] mce: CPU0: Thermal monitoring enabled (TM1)
[ +0.004106] process: using mwait in idle threads
[ +0.003828] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ +0.003997] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ +0.004004] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ +0.003997] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[ +0.003999] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ +0.004000] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[ +0.004000] RETBleed: Mitigation: Enhanced IBRS
[ +0.004001] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ +0.004000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ +0.004002] TAA: Mitigation: TSX disabled
[ +0.003997] MMIO Stale Data: Mitigation: Clear CPU buffers
[ +0.004008] GDS: Mitigation: Microcode
[ +0.004001] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ +0.003991] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ +0.004000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ +0.004000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ +0.004000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ +0.004000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ +0.004000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ +0.004000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ +0.004000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ +0.004003] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ +0.003997] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ +0.004000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ +0.004000] x86/fpu: xstate_offset[5]: 960, xstate_sizes[5]: 64
[ +0.004000] x86/fpu: xstate_offset[6]: 1024, xstate_sizes[6]: 512
[ +0.004000] x86/fpu: xstate_offset[7]: 1536, xstate_sizes[7]: 1024
[ +0.004000] x86/fpu: xstate_offset[9]: 2560, xstate_sizes[9]: 8
[ +0.004000] x86/fpu: Enabled xstate features 0x2ff, context size is 2568 bytes, using 'compacted' format.
[ +0.023444] Freeing SMP alternatives memory: 32K
[ +0.002413] pid_max: default: 40960 minimum: 320
[ +0.002226] LSM: Security Framework initializing
[ +0.003927] Yama: disabled by default; enable with sysctl kernel.yama.*
[ +0.004030] AppArmor: AppArmor initialized
[ +0.003961] TOMOYO Linux initialized
[ +0.027219] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc)
[ +0.015010] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, vmalloc)
[ +0.002154] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
[ +0.003951] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
[ +0.007841] smpboot: CPU0: Intel(R) Xeon(R) Silver 4210R CPU @ 2.40GHz (family: 0x6, model: 0x55, stepping: 0x7)
[ +0.004028] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ +0.003798] ... version: 4
[ +0.003998] ... bit width: 48
[ +0.004000] ... generic registers: 4
[ +0.004000] ... value mask: 0000ffffffffffff
[ +0.004000] ... max period: 00007fffffffffff
[ +0.004000] ... fixed-purpose events: 3
[ +0.004000] ... event mask: 000000070000000f
[ +0.004128] rcu: Hierarchical SRCU implementation.
[ +0.007042] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ +0.001534] smp: Bringing up secondary CPUs ...
[ +0.003456] x86: Booting SMP configuration:
[ +0.003843] .... node #1, CPUs: #1
[ -0.418872] smpboot: CPU 1 Converting physical 0 to logical die 1
[ +0.520489] .... node #0, CPUs: #2
[ +0.006382] .... node #1, CPUs: #3
[ +0.007999] .... node #0, CPUs: #4
[ +0.008001] .... node #1, CPUs: #5
[ +0.007999] .... node #0, CPUs: #6
[ +0.008002] .... node #1, CPUs: #7
[ +0.007998] .... node #0, CPUs: #8
[ +0.008003] .... node #1, CPUs: #9
[ +0.007997] .... node #0, CPUs: #10
[ +0.008002] .... node #1, CPUs: #11
[ +0.007998] .... node #0, CPUs: #12
[ +0.008003] .... node #1, CPUs: #13
[ +0.007997] .... node #0, CPUs: #14
[ +0.008002] .... node #1, CPUs: #15
[ +0.007998] .... node #0, CPUs: #16
[ +0.008002] .... node #1, CPUs: #17
[ +0.007998] .... node #0, CPUs: #18
[ +0.008002] .... node #1, CPUs: #19
[ +0.007998] .... node #0, CPUs: #20
[ +0.001340] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ +0.008360] .... node #1, CPUs: #21
[ +0.002300] .... node #0, CPUs: #22
[ +0.004002] .... node #1, CPUs: #23
[ +0.003998] .... node #0, CPUs: #24
[ +0.004002] .... node #1, CPUs: #25
[ +0.003998] .... node #0, CPUs: #26
[ +0.004003] .... node #1, CPUs: #27
[ +0.003997] .... node #0, CPUs: #28
[ +0.004002] .... node #1, CPUs: #29
[ +0.003998] .... node #0, CPUs: #30
[ +0.004002] .... node #1, CPUs: #31
[ +0.003998] .... node #0, CPUs: #32
[ +0.004003] .... node #1, CPUs: #33
[ +0.003997] .... node #0, CPUs: #34
[ +0.004002] .... node #1, CPUs: #35
[ +0.003998] .... node #0, CPUs: #36
[ +0.004002] .... node #1, CPUs: #37
[ +0.003998] .... node #0, CPUs: #38
[ +0.004002] .... node #1, CPUs: #39
[ +0.001499] smp: Brought up 2 nodes, 40 CPUs
[ +0.006499] smpboot: Max logical packages: 2
[ +0.004000] smpboot: Total of 40 processors activated (192036.76 BogoMIPS)
[ +0.072087] node 0 deferred pages initialised in 64ms
[ -0.000682] node 1 deferred pages initialised in 64ms
[ +0.017687] devtmpfs: initialized
[ +0.003003] x86/mm: Memory block size: 2048MB
[ +0.004518] PM: Registering ACPI NVS region [mem 0x6e3ff000-0x6f1fefff] (14680064 bytes)
[ +0.003722] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ +0.003993] futex hash table entries: 16384 (order: 8, 1048576 bytes, vmalloc)
[ +0.003913] pinctrl core: initialized pinctrl subsystem
[ +0.004095] NET: Registered protocol family 16
[ +0.004569] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ +0.003912] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ +0.004003] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ +0.003190] audit: initializing netlink subsys (disabled)
[ +0.004018] audit: type=2000 audit(1718303934.784:1): state=initialized audit_enabled=0 res=1
[ +0.000115] thermal_sys: Registered thermal governor 'fair_share'
[ +0.003858] thermal_sys: Registered thermal governor 'bang_bang'
[ +0.003999] thermal_sys: Registered thermal governor 'step_wise'
[ +0.003999] thermal_sys: Registered thermal governor 'user_space'
[ +0.004000] thermal_sys: Registered thermal governor 'power_allocator'
[ +0.004026] cpuidle: using governor ladder
[ +0.007992] cpuidle: using governor menu
[ +0.003987] Detected 1 PCC Subspaces
[ +0.003587] Registering PCC driver as Mailbox controller
[ +0.000500] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ +0.003910] ACPI: bus type PCI registered
[ +0.003999] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ +0.008249] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
[ +0.007754] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
[ +0.008012] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override.
[ +0.012311] PCI: Using configuration type 1 for base access
[ +0.003682] PCI: Dell System detected, enabling pci=bfsort.
[ +0.009047] Kprobes globally optimized
[ +0.003047] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ +0.007906] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ +0.136155] ACPI: Added _OSI(Module Device)
[ +0.003837] ACPI: Added _OSI(Processor Device)
[ +0.003999] ACPI: Added _OSI(3.0 _SCP Extensions)
[ +0.004000] ACPI: Added _OSI(Processor Aggregator Device)
[ +0.004000] ACPI: Added _OSI(Linux-Dell-Video)
[ +0.008000] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ +0.004001] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ +0.071412] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ +0.014900] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ +0.020520] ACPI: Dynamic OEM Table Load:
[ +0.023274] ACPI: Dynamic OEM Table Load:
[ +0.021359] ACPI: Dynamic OEM Table Load:
[ +0.119201] ACPI: Interpreter enabled
[ +0.001353] ACPI: (supports S0 S5)
[ +0.003395] ACPI: Using IOAPIC for interrupt routing
[ +0.004719] HEST: Table parsing has been initialized.
[ +0.008409] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ +0.007460] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ +0.016091] ACPI: Enabled 5 GPEs in block 00 to 7F
[ +0.050330] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-16])
[ +0.005581] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ +0.012058] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR]
[ +0.007993] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ +0.003944] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ +0.009431] PCI host bridge to bus 0000:00
[ +0.006570] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ +0.008000] pci_bus 0000:00: root bus resource [io 0x1000-0x3fff window]
[ +0.004000] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ +0.007999] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ +0.008001] pci_bus 0000:00: root bus resource [mem 0xfe010000-0xfe010fff window]
[ +0.007999] pci_bus 0000:00: root bus resource [mem 0x90000000-0x9d7fffff window]
[ +0.008004] pci_bus 0000:00: root bus resource [mem 0x380000000000-0x380fffffffff window]
[ +0.007996] pci_bus 0000:00: root bus resource [bus 00-16]
[ +0.004018] pci 0000:00:00.0: [8086:2020] type 00 class 0x060000
[ +0.008666] pci 0000:00:05.0: [8086:2024] type 00 class 0x088000
[ +0.003958] pci 0000:00:05.2: [8086:2025] type 00 class 0x088000
[ +0.007986] pci 0000:00:05.4: [8086:2026] type 00 class 0x080020
[ +0.007388] pci 0000:00:05.4: reg 0x10: [mem 0x93020000-0x93020fff]
[ +0.004642] pci 0000:00:08.0: [8086:2014] type 00 class 0x088000
[ +0.007975] pci 0000:00:08.1: [8086:2015] type 00 class 0x110100
[ +0.003970] pci 0000:00:08.2: [8086:2016] type 00 class 0x088000
[ +0.008035] pci 0000:00:11.0: [8086:a1ec] type 00 class 0xff0000
[ +0.007363] pci 0000:00:11.0: device has non-compliant BARs; disabling IO/MEM decoding
[ +0.008623] pci 0000:00:11.5: [8086:a1d2] type 00 class 0x010601
[ +0.003397] pci 0000:00:11.5: reg 0x10: [mem 0x93016000-0x93017fff]
[ +0.007992] pci 0000:00:11.5: reg 0x14: [mem 0x9301f000-0x9301f0ff]
[ +0.008000] pci 0000:00:11.5: reg 0x18: [io 0x2068-0x206f]
[ +0.004000] pci 0000:00:11.5: reg 0x1c: [io 0x2074-0x2077]
[ +0.004000] pci 0000:00:11.5: reg 0x20: [io 0x2040-0x205f]
[ +0.008000] pci 0000:00:11.5: reg 0x24: [mem 0x92f80000-0x92ffffff]
[ +0.004032] pci 0000:00:11.5: PME# supported from D3hot
[ +0.008576] pci 0000:00:14.0: [8086:a1af] type 00 class 0x0c0330
[ +0.003408] pci 0000:00:14.0: reg 0x10: [mem 0x93000000-0x9300ffff 64bit]
[ +0.008065] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ +0.004523] pci 0000:00:14.2: [8086:a1b1] type 00 class 0x118000
[ +0.007411] pci 0000:00:14.2: reg 0x10: [mem 0x9301c000-0x9301cfff 64bit]
[ +0.008657] pci 0000:00:16.0: [8086:a1ba] type 00 class 0x078000
[ +0.003350] pci 0000:00:16.0: reg 0x10: [mem 0x9301b000-0x9301bfff 64bit]
[ +0.008080] pci 0000:00:16.0: PME# supported from D3hot
[ +0.004493] pci 0000:00:16.1: [8086:a1bb] type 00 class 0x078000
[ +0.007426] pci 0000:00:16.1: reg 0x10: [mem 0x9301a000-0x9301afff 64bit]
[ +0.008083] pci 0000:00:16.1: PME# supported from D3hot
[ +0.004482] pci 0000:00:16.4: [8086:a1be] type 00 class 0x078000
[ +0.007435] pci 0000:00:16.4: reg 0x10: [mem 0x93019000-0x93019fff 64bit]
[ +0.004081] pci 0000:00:16.4: PME# supported from D3hot
[ +0.008480] pci 0000:00:17.0: [8086:a182] type 00 class 0x010601
[ +0.003426] pci 0000:00:17.0: reg 0x10: [mem 0x93014000-0x93015fff]
[ +0.007992] pci 0000:00:17.0: reg 0x14: [mem 0x9301e000-0x9301e0ff]
[ +0.008000] pci 0000:00:17.0: reg 0x18: [io 0x2060-0x2067]
[ +0.004000] pci 0000:00:17.0: reg 0x1c: [io 0x2070-0x2073]
[ +0.003999] pci 0000:00:17.0: reg 0x20: [io 0x2020-0x203f]
[ +0.008001] pci 0000:00:17.0: reg 0x24: [mem 0x92f00000-0x92f7ffff]
[ +0.004031] pci 0000:00:17.0: PME# supported from D3hot
[ +0.008571] pci 0000:00:1c.0: [8086:a190] type 01 class 0x060400
[ +0.004018] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ +0.007468] pci 0000:00:1c.4: [8086:a194] type 01 class 0x060400
[ +0.003991] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ +0.008554] pci 0000:00:1c.5: [8086:a195] type 01 class 0x060400
[ +0.007448] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ +0.004557] pci 0000:00:1f.0: [8086:a1c1] type 00 class 0x060100
[ +0.008098] pci 0000:00:1f.2: [8086:a1a1] type 00 class 0x058000
[ +0.007275] pci 0000:00:1f.2: reg 0x10: [mem 0x93010000-0x93013fff]
[ +0.004795] pci 0000:00:1f.4: [8086:a1a3] type 00 class 0x0c0500
[ +0.007212] pci 0000:00:1f.4: reg 0x10: [mem 0x93018000-0x930180ff 64bit]
[ +0.004010] pci 0000:00:1f.4: reg 0x20: [io 0x2000-0x201f]
[ +0.008577] pci 0000:00:1f.5: [8086:a1a4] type 00 class 0x0c8000
[ +0.007408] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ +0.004675] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ +0.007303] pci 0000:00:1c.0: bridge window [mem 0x92a00000-0x92dfffff]
[ +0.004053] pci 0000:02:00.0: [1556:be00] type 01 class 0x060400
[ +0.019970] pci 0000:00:1c.4: PCI bridge to [bus 02-03]
[ +0.003977] pci 0000:00:1c.4: bridge window [mem 0x92000000-0x928fffff]
[ +0.007999] pci 0000:00:1c.4: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[ +0.008029] pci_bus 0000:03: extended config space not accessible
[ +0.003987] pci 0000:03:00.0: [102b:0536] type 00 class 0x030000
[ +0.008008] pci 0000:03:00.0: reg 0x10: [mem 0x91000000-0x91ffffff pref]
[ +0.003989] pci 0000:03:00.0: reg 0x14: [mem 0x92808000-0x9280bfff]
[ +0.008000] pci 0000:03:00.0: reg 0x18: [mem 0x92000000-0x927fffff]
[ +0.008146] pci 0000:02:00.0: PCI bridge to [bus 03]
[ +0.003845] pci 0000:02:00.0: bridge window [mem 0x92000000-0x928fffff]
[ +0.003999] pci 0000:02:00.0: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[ +0.008075] pci 0000:04:00.0: [14e4:165f] type 00 class 0x020000
[ +0.007954] pci 0000:04:00.0: reg 0x10: [mem 0x92e30000-0x92e3ffff 64bit pref]
[ +0.007989] pci 0000:04:00.0: reg 0x18: [mem 0x92e40000-0x92e4ffff 64bit pref]
[ +0.008000] pci 0000:04:00.0: reg 0x20: [mem 0x92e50000-0x92e5ffff 64bit pref]
[ +0.003992] pci 0000:04:00.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
[ +0.008081] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ +0.007958] pci 0000:04:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:1c.5 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link)
[ +0.012052] pci 0000:04:00.1: [14e4:165f] type 00 class 0x020000
[ +0.007928] pci 0000:04:00.1: reg 0x10: [mem 0x92e00000-0x92e0ffff 64bit pref]
[ +0.007989] pci 0000:04:00.1: reg 0x18: [mem 0x92e10000-0x92e1ffff 64bit pref]
[ +0.004000] pci 0000:04:00.1: reg 0x20: [mem 0x92e20000-0x92e2ffff 64bit pref]
[ +0.007992] pci 0000:04:00.1: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
[ +0.008081] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
[ +0.004032] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ +0.007877] pci 0000:00:1c.5: bridge window [mem 0x92e00000-0x92efffff 64bit pref]
[ +0.008018] pci_bus 0000:00: on NUMA node 0
[ +0.000257] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ +0.003787] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 10 11 12 14 15)
[ +0.007996] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ +0.008001] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ +0.007999] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ +0.003999] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 10 11 12 14 15)
[ +0.008000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ +0.008000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ +0.008241] ACPI: PCI Root Bridge [PC01] (domain 0000 [bus 17-39])
[ +0.003698] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ +0.008095] acpi PNP0A08:01: _OSC: platform does not support [SHPCHotplug AER LTR]
[ +0.008009] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ +0.007894] acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
[ +0.008144] PCI host bridge to bus 0000:17
[ +0.003857] pci_bus 0000:17: root bus resource [io 0x4000-0x5fff window]
[ +0.007999] pci_bus 0000:17: root bus resource [mem 0x9d800000-0xaaffffff window]
[ +0.008001] pci_bus 0000:17: root bus resource [mem 0x381000000000-0x381fffffffff window]
[ +0.007999] pci_bus 0000:17: root bus resource [bus 17-39]
[ +0.004012] pci 0000:17:05.0: [8086:2034] type 00 class 0x088000
[ +0.008100] pci 0000:17:05.2: [8086:2035] type 00 class 0x088000
[ +0.003993] pci 0000:17:05.4: [8086:2036] type 00 class 0x080020
[ +0.007911] pci 0000:17:05.4: reg 0x10: [mem 0x9d800000-0x9d800fff]
[ +0.004109] pci 0000:17:08.0: [8086:208d] type 00 class 0x088000
[ +0.007965] pci 0000:17:08.1: [8086:208d] type 00 class 0x088000
[ +0.003987] pci 0000:17:08.2: [8086:208d] type 00 class 0x088000
[ +0.007999] pci 0000:17:08.3: [8086:208d] type 00 class 0x088000
[ +0.004007] pci 0000:17:08.4: [8086:208d] type 00 class 0x088000
[ +0.007993] pci 0000:17:08.5: [8086:208d] type 00 class 0x088000
[ +0.004008] pci 0000:17:08.6: [8086:208d] type 00 class 0x088000
[ +0.007993] pci 0000:17:08.7: [8086:208d] type 00 class 0x088000
[ +0.008014] pci 0000:17:09.0: [8086:208d] type 00 class 0x088000
[ +0.003996] pci 0000:17:09.1: [8086:208d] type 00 class 0x088000
[ +0.007997] pci 0000:17:0e.0: [8086:208e] type 00 class 0x088000
[ +0.004008] pci 0000:17:0e.1: [8086:208e] type 00 class 0x088000
[ +0.007985] pci 0000:17:0e.2: [8086:208e] type 00 class 0x088000
[ +0.004001] pci 0000:17:0e.3: [8086:208e] type 00 class 0x088000
[ +0.007999] pci 0000:17:0e.4: [8086:208e] type 00 class 0x088000
[ +0.003999] pci 0000:17:0e.5: [8086:208e] type 00 class 0x088000
[ +0.008013] pci 0000:17:0e.6: [8086:208e] type 00 class 0x088000
[ +0.003988] pci 0000:17:0e.7: [8086:208e] type 00 class 0x088000
[ +0.007999] pci 0000:17:0f.0: [8086:208e] type 00 class 0x088000
[ +0.004012] pci 0000:17:0f.1: [8086:208e] type 00 class 0x088000
[ +0.007999] pci 0000:17:1d.0: [8086:2054] type 00 class 0x088000
[ +0.004001] pci 0000:17:1d.1: [8086:2055] type 00 class 0x088000
[ +0.007989] pci 0000:17:1d.2: [8086:2056] type 00 class 0x088000
[ +0.004000] pci 0000:17:1d.3: [8086:2057] type 00 class 0x088000
[ +0.008012] pci 0000:17:1e.0: [8086:2080] type 00 class 0x088000
[ +0.003999] pci 0000:17:1e.1: [8086:2081] type 00 class 0x088000
[ +0.007992] pci 0000:17:1e.2: [8086:2082] type 00 class 0x088000
[ +0.003999] pci 0000:17:1e.3: [8086:2083] type 00 class 0x088000
[ +0.008000] pci 0000:17:1e.4: [8086:2084] type 00 class 0x088000
[Jun13 18:39] pci 0000:17:1e.5: [8086:2085] type 00 class 0x088000
[ +0.008000] pci 0000:17:1e.6: [8086:2086] type 00 class 0x088000
[ +0.003999] pci_bus 0000:17: on NUMA node 0
[ +0.000087] ACPI: PCI Root Bridge [PC02] (domain 0000 [bus 3a-5c])
[ +0.007839] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ +0.008086] acpi PNP0A08:02: _OSC: platform does not support [SHPCHotplug AER LTR]
[ +0.007999] acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ +0.007913] acpi PNP0A08:02: FADT indicates ASPM is unsupported, using BIOS configuration
[ +0.008135] PCI host bridge to bus 0000:3a
[ +0.003866] pci_bus 0000:3a: root bus resource [io 0x6000-0x7fff window]
[ +0.007999] pci_bus 0000:3a: root bus resource [mem 0xab000000-0xb87fffff window]
[ +0.008001] pci_bus 0000:3a: root bus resource [mem 0x382000000000-0x382fffffffff window]
[ +0.007999] pci_bus 0000:3a: root bus resource [bus 3a-5c]
[ +0.004011] pci 0000:3a:05.0: [8086:2034] type 00 class 0x088000
[ +0.008100] pci 0000:3a:05.2: [8086:2035] type 00 class 0x088000
[ +0.003987] pci 0000:3a:05.4: [8086:2036] type 00 class 0x080020
[ +0.007918] pci 0000:3a:05.4: reg 0x10: [mem 0xab000000-0xab000fff]
[ +0.004100] pci 0000:3a:08.0: [8086:2066] type 00 class 0x088000
[ +0.007985] pci 0000:3a:09.0: [8086:2066] type 00 class 0x088000
[ +0.003997] pci 0000:3a:0a.0: [8086:2040] type 00 class 0x088000
[ +0.008000] pci 0000:3a:0a.1: [8086:2041] type 00 class 0x088000
[ +0.003989] pci 0000:3a:0a.2: [8086:2042] type 00 class 0x088000
[ +0.008002] pci 0000:3a:0a.3: [8086:2043] type 00 class 0x088000
[ +0.004012] pci 0000:3a:0a.4: [8086:2044] type 00 class 0x088000
[ +0.007987] pci 0000:3a:0a.5: [8086:2045] type 00 class 0x088000
[ +0.004003] pci 0000:3a:0a.6: [8086:2046] type 00 class 0x088000
[ +0.007996] pci 0000:3a:0a.7: [8086:2047] type 00 class 0x088000
[ +0.004000] pci 0000:3a:0b.0: [8086:2048] type 00 class 0x088000
[ +0.008011] pci 0000:3a:0b.1: [8086:2049] type 00 class 0x088000
[ +0.003989] pci 0000:3a:0b.2: [8086:204a] type 00 class 0x088000
[ +0.008003] pci 0000:3a:0b.3: [8086:204b] type 00 class 0x088000
[ +0.008012] pci 0000:3a:0c.0: [8086:2040] type 00 class 0x088000
[ +0.004001] pci 0000:3a:0c.1: [8086:2041] type 00 class 0x088000
[ +0.007992] pci 0000:3a:0c.2: [8086:2042] type 00 class 0x088000
[ +0.003993] pci 0000:3a:0c.3: [8086:2043] type 00 class 0x088000
[ +0.008002] pci 0000:3a:0c.4: [8086:2044] type 00 class 0x088000
[ +0.003997] pci 0000:3a:0c.5: [8086:2045] type 00 class 0x088000
[ +0.008001] pci 0000:3a:0c.6: [8086:2046] type 00 class 0x088000
[ +0.004000] pci 0000:3a:0c.7: [8086:2047] type 00 class 0x088000
[ +0.008012] pci 0000:3a:0d.0: [8086:2048] type 00 class 0x088000
[ +0.004002] pci 0000:3a:0d.1: [8086:2049] type 00 class 0x088000
[ +0.007986] pci 0000:3a:0d.2: [8086:204a] type 00 class 0x088000
[ +0.004000] pci 0000:3a:0d.3: [8086:204b] type 00 class 0x088000
[ +0.008008] pci_bus 0000:3a: on NUMA node 0
[ +0.000075] ACPI: PCI Root Bridge [PC03] (domain 0000 [bus 5d-7f])
[ +0.003831] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ +0.012083] acpi PNP0A08:03: _OSC: platform does not support [SHPCHotplug AER LTR]
[ +0.008002] acpi PNP0A08:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ +0.003914] acpi PNP0A08:03: FADT indicates ASPM is unsupported, using BIOS configuration
[ +0.008160] PCI host bridge to bus 0000:5d
[ +0.007840] pci_bus 0000:5d: root bus resource [io 0x8000-0x9fff window]
[ +0.003999] pci_bus 0000:5d: root bus resource [mem 0xb8800000-0xc5ffffff window]
[ +0.008000] pci_bus 0000:5d: root bus resource [mem 0x383000000000-0x383fffffffff window]
[ +0.008000] pci_bus 0000:5d: root bus resource [bus 5d-7f]
[ +0.004011] pci 0000:5d:05.0: [8086:2034] type 00 class 0x088000
[ +0.008091] pci 0000:5d:05.2: [8086:2035] type 00 class 0x088000
[ +0.007998] pci 0000:5d:05.4: [8086:2036] type 00 class 0x080020
[ +0.003917] pci 0000:5d:05.4: reg 0x10: [mem 0xb8800000-0xb8800fff]
[ +0.008102] pci 0000:5d:0e.0: [8086:2058] type 00 class 0x110100
[ +0.003990] pci 0000:5d:0e.1: [8086:2059] type 00 class 0x088000
[ +0.007978] pci 0000:5d:0f.0: [8086:2058] type 00 class 0x110100
[ +0.004024] pci 0000:5d:0f.1: [8086:2059] type 00 class 0x088000
[ +0.007978] pci 0000:5d:12.0: [8086:204c] type 00 class 0x110100
[ +0.004007] pci 0000:5d:12.1: [8086:204d] type 00 class 0x110100
[ +0.007976] pci 0000:5d:12.2: [8086:204e] type 00 class 0x088000
[ +0.004003] pci 0000:5d:15.0: [8086:2018] type 00 class 0x088000
[ +0.008006] pci 0000:5d:15.1: [8086:2088] type 00 class 0x110100
[ +0.004006] pci 0000:5d:16.0: [8086:2018] type 00 class 0x088000
[ +0.007994] pci 0000:5d:16.1: [8086:2088] type 00 class 0x110100
[ +0.003990] pci 0000:5d:16.4: [8086:2018] type 00 class 0x088000
[ +0.008001] pci 0000:5d:16.5: [8086:2088] type 00 class 0x110100
[ +0.004002] pci_bus 0000:5d: on NUMA node 0
[ +0.000124] ACPI: PCI Root Bridge [PC06] (domain 0000 [bus 80-84])
[ +0.007804] acpi PNP0A08:06: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ +0.008083] acpi PNP0A08:06: _OSC: platform does not support [SHPCHotplug AER LTR]
[ +0.008002] acpi PNP0A08:06: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ +0.007913] acpi PNP0A08:06: FADT indicates ASPM is unsupported, using BIOS configuration
[ +0.008033] acpi PNP0A08:06: host bridge window [io 0x0000 window] (ignored, not CPU addressable)
[ +0.008040] PCI host bridge to bus 0000:80
[ +0.003928] pci_bus 0000:80: root bus resource [mem 0xc6000000-0xd37fffff window]
[ +0.008000] pci_bus 0000:80: root bus resource [mem 0x384000000000-0x384fffffffff window]
[ +0.007999] pci_bus 0000:80: root bus resource [bus 80-84]
[ +0.008017] pci 0000:80:05.0: [8086:2024] type 00 class 0x088000
[ +0.004094] pci 0000:80:05.2: [8086:2025] type 00 class 0x088000
[ +0.007983] pci 0000:80:05.4: [8086:2026] type 00 class 0x080020
[ +0.003921] pci 0000:80:05.4: reg 0x10: [mem 0xc6000000-0xc6000fff]
[ +0.008096] pci 0000:80:08.0: [8086:2014] type 00 class 0x088000
[ +0.003992] pci 0000:80:08.1: [8086:2015] type 00 class 0x110100
[ +0.007967] pci 0000:80:08.2: [8086:2016] type 00 class 0x088000
[ +0.004016] pci_bus 0000:80: on NUMA node 1
[ +0.000069] ACPI: PCI Root Bridge [PC07] (domain 0000 [bus 85-ad])
[ +0.007847] acpi PNP0A08:07: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ +0.008082] acpi PNP0A08:07: _OSC: platform does not support [SHPCHotplug AER LTR]
[ +0.008003] acpi PNP0A08:07: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ +0.007913] acpi PNP0A08:07: FADT indicates ASPM is unsupported, using BIOS configuration
[ +0.008129] PCI host bridge to bus 0000:85
[ +0.003873] pci_bus 0000:85: root bus resource [io 0xa000-0xbfff window]
[ +0.007998] pci_bus 0000:85: root bus resource [mem 0xd3800000-0xe0ffffff window]
[ +0.008000] pci_bus 0000:85: root bus resource [mem 0x385000000000-0x385fffffffff window]
[ +0.008001] pci_bus 0000:85: root bus resource [bus 85-ad]
[ +0.004009] pci 0000:85:05.0: [8086:2034] type 00 class 0x088000
[ +0.004092] pci 0000:85:05.2: [8086:2035] type 00 class 0x088000
[ +0.007998] pci 0000:85:05.4: [8086:2036] type 00 class 0x080020
[ +0.007915] pci 0000:85:05.4: reg 0x10: [mem 0xd3800000-0xd3800fff]
[ +0.004097] pci 0000:85:08.0: [8086:208d] type 00 class 0x088000
[ +0.007984] pci 0000:85:08.1: [8086:208d] type 00 class 0x088000
[ +0.003978] pci 0000:85:08.2: [8086:208d] type 00 class 0x088000
[ +0.008015] pci 0000:85:08.3: [8086:208d] type 00 class 0x088000
[ +0.003984] pci 0000:85:08.4: [8086:208d] type 00 class 0x088000
[ +0.008000] pci 0000:85:08.5: [8086:208d] type 00 class 0x088000
[ +0.004003] pci 0000:85:08.6: [8086:208d] type 00 class 0x088000
[ +0.007997] pci 0000:85:08.7: [8086:208d] type 00 class 0x088000
[ +0.004000] pci 0000:85:09.0: [8086:208d] type 00 class 0x088000
[ +0.008014] pci 0000:85:09.1: [8086:208d] type 00 class 0x088000
[ +0.003991] pci 0000:85:0e.0: [8086:208e] type 00 class 0x088000
[ +0.008013] pci 0000:85:0e.1: [8086:208e] type 00 class 0x088000
[ +0.003983] pci 0000:85:0e.2: [8086:208e] type 00 class 0x088000
[ +0.007998] pci 0000:85:0e.3: [8086:208e] type 00 class 0x088000
[ +0.004003] pci 0000:85:0e.4: [8086:208e] type 00 class 0x088000
[ +0.007998] pci 0000:85:0e.5: [8086:208e] type 00 class 0x088000
[ +0.004001] pci 0000:85:0e.6: [8086:208e] type 00 class 0x088000
[ +0.007999] pci 0000:85:0e.7: [8086:208e] type 00 class 0x088000
[ +0.004001] pci 0000:85:0f.0: [8086:208e] type 00 class 0x088000
[ +0.008014] pci 0000:85:0f.1: [8086:208e] type 00 class 0x088000
[ +0.003994] pci 0000:85:1d.0: [8086:2054] type 00 class 0x088000
[ +0.008002] pci 0000:85:1d.1: [8086:2055] type 00 class 0x088000
[ +0.003990] pci 0000:85:1d.2: [8086:2056] type 00 class 0x088000
[ +0.007999] pci 0000:85:1d.3: [8086:2057] type 00 class 0x088000
[ +0.004003] pci 0000:85:1e.0: [8086:2080] type 00 class 0x088000
[ +0.008006] pci 0000:85:1e.1: [8086:2081] type 00 class 0x088000
[ +0.007992] pci 0000:85:1e.2: [8086:2082] type 00 class 0x088000
[ +0.004014] pci 0000:85:1e.3: [8086:2083] type 00 class 0x088000
[ +0.007986] pci 0000:85:1e.4: [8086:2084] type 00 class 0x088000
[ +0.004000] pci 0000:85:1e.5: [8086:2085] type 00 class 0x088000
[ +0.008000] pci 0000:85:1e.6: [8086:2086] type 00 class 0x088000
[ +0.004000] pci_bus 0000:85: on NUMA node 1
[ +0.000088] ACPI: PCI Root Bridge [PC08] (domain 0000 [bus ae-d6])
[ +0.007840] acpi PNP0A08:08: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ +0.008085] acpi PNP0A08:08: _OSC: platform does not support [SHPCHotplug AER LTR]
[ +0.008000] acpi PNP0A08:08: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ +0.007913] acpi PNP0A08:08: FADT indicates ASPM is unsupported, using BIOS configuration
[ +0.008152] PCI host bridge to bus 0000:ae
[ +0.003849] pci_bus 0000:ae: root bus resource [io 0xc000-0xdfff window]
[ +0.008000] pci_bus 0000:ae: root bus resource [mem 0xe1000000-0xee7fffff window]
[ +0.003999] pci_bus 0000:ae: root bus resource [mem 0x386000000000-0x386fffffffff window]
[ +0.008001] pci_bus 0000:ae: root bus resource [bus ae-d6]
[ +0.008009] pci 0000:ae:05.0: [8086:2034] type 00 class 0x088000
[ +0.004086] pci 0000:ae:05.2: [8086:2035] type 00 class 0x088000
[ +0.007996] pci 0000:ae:05.4: [8086:2036] type 00 class 0x080020
[ +0.003923] pci 0000:ae:05.4: reg 0x10: [mem 0xe1000000-0xe1000fff]
[ +0.008096] pci 0000:ae:08.0: [8086:2066] type 00 class 0x088000
[ +0.003989] pci 0000:ae:09.0: [8086:2066] type 00 class 0x088000
[ +0.007995] pci 0000:ae:0a.0: [8086:2040] type 00 class 0x088000
[ +0.003997] pci 0000:ae:0a.1: [8086:2041] type 00 class 0x088000
[ +0.007992] pci 0000:ae:0a.2: [8086:2042] type 00 class 0x088000
[ +0.008001] pci 0000:ae:0a.3: [8086:2043] type 00 class 0x088000
[ +0.003997] pci 0000:ae:0a.4: [8086:2044] type 00 class 0x088000
[ +0.008000] pci 0000:ae:0a.5: [8086:2045] type 00 class 0x088000
[ +0.004001] pci 0000:ae:0a.6: [8086:2046] type 00 class 0x088000
[ +0.008009] pci 0000:ae:0a.7: [8086:2047] type 00 class 0x088000
[ +0.003989] pci 0000:ae:0b.0: [8086:2048] type 00 class 0x088000
[ +0.008011] pci 0000:ae:0b.1: [8086:2049] type 00 class 0x088000
[ +0.003990] pci 0000:ae:0b.2: [8086:204a] type 00 class 0x088000
[ +0.008001] pci 0000:ae:0b.3: [8086:204b] type 00 class 0x088000
[ +0.004001] pci 0000:ae:0c.0: [8086:2040] type 00 class 0x088000
[ +0.008010] pci 0000:ae:0c.1: [8086:2041] type 00 class 0x088000
[ +0.003989] pci 0000:ae:0c.2: [8086:2042] type 00 class 0x088000
[ +0.008006] pci 0000:ae:0c.3: [8086:2043] type 00 class 0x088000
[ +0.003994] pci 0000:ae:0c.4: [8086:2044] type 00 class 0x088000
[ +0.007999] pci 0000:ae:0c.5: [8086:2045] type 00 class 0x088000
[ +0.004000] pci 0000:ae:0c.6: [8086:2046] type 00 class 0x088000
[ +0.008000] pci 0000:ae:0c.7: [8086:2047] type 00 class 0x088000
[ +0.004002] pci 0000:ae:0d.0: [8086:2048] type 00 class 0x088000
[ +0.008011] pci 0000:ae:0d.1: [8086:2049] type 00 class 0x088000
[ +0.003988] pci 0000:ae:0d.2: [8086:204a] type 00 class 0x088000
[ +0.008013] pci 0000:ae:0d.3: [8086:204b] type 00 class 0x088000
[ +0.003994] pci_bus 0000:ae: on NUMA node 1
[ +0.000079] ACPI: PCI Root Bridge [PC09] (domain 0000 [bus d7-ff])
[ +0.007833] acpi PNP0A08:09: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ +0.008083] acpi PNP0A08:09: _OSC: platform does not support [SHPCHotplug AER LTR]
[ +0.008002] acpi PNP0A08:09: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ +0.007913] acpi PNP0A08:09: FADT indicates ASPM is unsupported, using BIOS configuration
[ +0.008104] PCI host bridge to bus 0000:d7
[ +0.003897] pci_bus 0000:d7: root bus resource [io 0xe000-0xffff window]
[ +0.007999] pci_bus 0000:d7: root bus resource [mem 0xee800000-0xfbffffff window]
[ +0.008002] pci_bus 0000:d7: root bus resource [mem 0x387000000000-0x387fffffffff window]
[ +0.007999] pci_bus 0000:d7: root bus resource [bus d7-ff]
[ +0.004009] pci 0000:d7:05.0: [8086:2034] type 00 class 0x088000
[ +0.008088] pci 0000:d7:05.2: [8086:2035] type 00 class 0x088000
[ +0.003998] pci 0000:d7:05.4: [8086:2036] type 00 class 0x080020
[ +0.007920] pci 0000:d7:05.4: reg 0x10: [mem 0xee800000-0xee800fff]
[ +0.004096] pci 0000:d7:0e.0: [8086:2058] type 00 class 0x110100
[ +0.007984] pci 0000:d7:0e.1: [8086:2059] type 00 class 0x088000
[ +0.003986] pci 0000:d7:0f.0: [8086:2058] type 00 class 0x110100
[ +0.008012] pci 0000:d7:0f.1: [8086:2059] type 00 class 0x088000
[ +0.004002] pci 0000:d7:12.0: [8086:204c] type 00 class 0x110100
[ +0.007995] pci 0000:d7:12.1: [8086:204d] type 00 class 0x110100
[ +0.003978] pci 0000:d7:12.2: [8086:204e] type 00 class 0x088000
[ +0.008001] pci 0000:d7:15.0: [8086:2018] type 00 class 0x088000
[ +0.004009] pci 0000:d7:15.1: [8086:2088] type 00 class 0x110100
[ +0.007990] pci 0000:d7:16.0: [8086:2018] type 00 class 0x088000
[ +0.004010] pci 0000:d7:16.1: [8086:2088] type 00 class 0x110100
[ +0.007988] pci 0000:d7:16.4: [8086:2018] type 00 class 0x088000
[ +0.004007] pci 0000:d7:16.5: [8086:2088] type 00 class 0x110100
[ +0.007996] pci_bus 0000:d7: on NUMA node 1
[ +0.000584] iommu: Default domain type: Translated
[ +0.003388] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[ +0.003957] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ +0.012044] pci 0000:03:00.0: vgaarb: bridge control possible
[ +0.003957] vgaarb: loaded
[ +0.002883] EDAC MC: Ver: 3.0.0
[ +0.005317] NetLabel: Initializing
[ +0.003344] NetLabel: domain hash size = 128
[ +0.004456] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ +0.004013] NetLabel: unlabeled traffic allowed by default
[ +0.007988] PCI: Using ACPI for IRQ routing
[ +0.007273] PCI: pci_cache_line_size set to 64 bytes
[ +0.000180] Expanded resource Reserved due to conflict with PNP0003:00
[ +0.004548] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ +0.000001] e820: reserve RAM buffer [mem 0x4ff75000-0x4fffffff]
[ +0.000001] e820: reserve RAM buffer [mem 0x683ff000-0x6bffffff]
[ +0.000001] e820: reserve RAM buffer [mem 0x6f800000-0x6fffffff]
[ +0.001780] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ +0.006216] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ +0.010139] clocksource: Switched to clocksource tsc-early
[ +0.014864] VFS: Disk quotas dquot_6.6.0
[ +0.003980] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ +0.007070] AppArmor: AppArmor Filesystem Enabled
[ +0.004706] pnp: PnP ACPI init
[ +0.006666] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ +0.000128] system 00:01: [io 0x0500-0x05fe] has been reserved
[ +0.005911] system 00:01: [io 0x0400-0x047f] has been reserved
[ +0.005903] system 00:01: [io 0x0600-0x061f] has been reserved
[ +0.005903] system 00:01: [io 0x0ca0-0x0ca5] has been reserved
[ +0.005905] system 00:01: [io 0x0880-0x0883] has been reserved
[ +0.005907] system 00:01: [io 0x0800-0x081f] has been reserved
[ +0.005905] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
[ +0.006598] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
[ +0.006597] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ +0.006595] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[ +0.006599] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
[ +0.006598] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
[ +0.006594] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ +0.006600] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0.000186] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ +0.000149] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ +0.000116] system 00:04: [mem 0xfd000000-0xfdabffff] has been reserved
[ +0.006594] system 00:04: [mem 0xfdad0000-0xfdadffff] has been reserved
[ +0.006597] system 00:04: [mem 0xfdb00000-0xfdffffff] has been reserved
[ +0.006598] system 00:04: [mem 0xfe000000-0xfe00ffff] has been reserved
[ +0.006597] system 00:04: [mem 0xfe011000-0xfe01ffff] has been reserved
[ +0.006595] system 00:04: [mem 0xfe036000-0xfe03bfff] has been reserved
[ +0.006598] system 00:04: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ +0.006600] system 00:04: [mem 0xfe410000-0xfe7fffff] has been reserved
[ +0.006598] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0.000253] system 00:05: [io 0x1000-0x10fe] has been reserved
[ +0.005910] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0.000556] pnp: PnP ACPI: found 6 devices
[ +0.010006] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ +0.008955] NET: Registered protocol family 2
[ +0.005033] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
[ +0.010402] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
[ +0.010294] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc)
[ +0.009042] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
[ +0.007562] TCP: Hash tables configured (established 524288 bind 65536)
[ +0.007367] UDP hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
[ +0.007888] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
[ +0.007793] NET: Registered protocol family 1
[ +0.004353] NET: Registered protocol family 44
[ +0.004452] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
[ +0.009881] pci 0000:04:00.1: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
[ +0.009894] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ +0.008159] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ +0.011448] pci 0000:00:1c.0: BAR 15: assigned [mem 0x380000000000-0x3800001fffff 64bit pref]
[ +0.008501] pci 0000:00:1c.5: BAR 14: assigned [mem 0x90000000-0x900fffff]
[ +0.006855] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ +0.006163] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ +0.004953] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ +0.006087] pci 0000:00:1c.0: bridge window [mem 0x92a00000-0x92dfffff]
[ +0.006775] pci 0000:00:1c.0: bridge window [mem 0x380000000000-0x3800001fffff 64bit pref]
[ +0.008427] pci 0000:02:00.0: PCI bridge to [bus 03]
[ +0.004961] pci 0000:02:00.0: bridge window [mem 0x92000000-0x928fffff]
[ +0.006777] pci 0000:02:00.0: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[ +0.007734] pci 0000:00:1c.4: PCI bridge to [bus 02-03]
[ +0.005219] pci 0000:00:1c.4: bridge window [mem 0x92000000-0x928fffff]
[ +0.006775] pci 0000:00:1c.4: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[ +0.007729] pci 0000:04:00.0: BAR 6: assigned [mem 0x90000000-0x9003ffff pref]
[ +0.007203] pci 0000:04:00.1: BAR 6: assigned [mem 0x90040000-0x9007ffff pref]
[ +0.007202] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ +0.004959] pci 0000:00:1c.5: bridge window [mem 0x90000000-0x900fffff]
[ +0.006778] pci 0000:00:1c.5: bridge window [mem 0x92e00000-0x92efffff 64bit pref]
[ +0.007731] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ +0.006164] pci_bus 0000:00: resource 5 [io 0x1000-0x3fff window]
[ +0.006165] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ +0.006858] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c7fff window]
[ +0.006856] pci_bus 0000:00: resource 8 [mem 0xfe010000-0xfe010fff window]
[ +0.006858] pci_bus 0000:00: resource 9 [mem 0x90000000-0x9d7fffff window]
[ +0.006857] pci_bus 0000:00: resource 10 [mem 0x380000000000-0x380fffffffff window]
[ +0.007631] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ +0.005563] pci_bus 0000:01: resource 1 [mem 0x92a00000-0x92dfffff]
[ +0.006250] pci_bus 0000:01: resource 2 [mem 0x380000000000-0x3800001fffff 64bit pref]
[ +0.007893] pci_bus 0000:02: resource 1 [mem 0x92000000-0x928fffff]
[ +0.006253] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
[ +0.007203] pci_bus 0000:03: resource 1 [mem 0x92000000-0x928fffff]
[ +0.006249] pci_bus 0000:03: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
[ +0.007204] pci_bus 0000:04: resource 1 [mem 0x90000000-0x900fffff]
[ +0.006252] pci_bus 0000:04: resource 2 [mem 0x92e00000-0x92efffff 64bit pref]
[ +0.007327] pci_bus 0000:17: resource 4 [io 0x4000-0x5fff window]
[ +0.006169] pci_bus 0000:17: resource 5 [mem 0x9d800000-0xaaffffff window]
[ +0.006852] pci_bus 0000:17: resource 6 [mem 0x381000000000-0x381fffffffff window]
[ +0.007567] pci_bus 0000:3a: resource 4 [io 0x6000-0x7fff window]
[ +0.006166] pci_bus 0000:3a: resource 5 [mem 0xab000000-0xb87fffff window]
[ +0.006855] pci_bus 0000:3a: resource 6 [mem 0x382000000000-0x382fffffffff window]
[ +0.007557] pci_bus 0000:5d: resource 4 [io 0x8000-0x9fff window]
[ +0.006167] pci_bus 0000:5d: resource 5 [mem 0xb8800000-0xc5ffffff window]
[ +0.006855] pci_bus 0000:5d: resource 6 [mem 0x383000000000-0x383fffffffff window]
[ +0.007556] pci_bus 0000:80: resource 4 [mem 0xc6000000-0xd37fffff window]
[ +0.006859] pci_bus 0000:80: resource 5 [mem 0x384000000000-0x384fffffffff window]
[ +0.007561] pci_bus 0000:85: resource 4 [io 0xa000-0xbfff window]
[ +0.006169] pci_bus 0000:85: resource 5 [mem 0xd3800000-0xe0ffffff window]
[ +0.006856] pci_bus 0000:85: resource 6 [mem 0x385000000000-0x385fffffffff window]
[ +0.007565] pci_bus 0000:ae: resource 4 [io 0xc000-0xdfff window]
[ +0.006165] pci_bus 0000:ae: resource 5 [mem 0xe1000000-0xee7fffff window]
[ +0.006857] pci_bus 0000:ae: resource 6 [mem 0x386000000000-0x386fffffffff window]
[ +0.007557] pci_bus 0000:d7: resource 4 [io 0xe000-0xffff window]
[ +0.006164] pci_bus 0000:d7: resource 5 [mem 0xee800000-0xfbffffff window]
[ +0.006857] pci_bus 0000:d7: resource 6 [mem 0x387000000000-0x387fffffffff window]
[ +0.008529] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ +0.008333] pci 0000:17:05.0: disabled boot interrupts on device [8086:2034]
[ +0.007073] pci 0000:3a:05.0: disabled boot interrupts on device [8086:2034]
[ +0.007069] pci 0000:5d:05.0: disabled boot interrupts on device [8086:2034]
[ +0.007061] pci 0000:85:05.0: disabled boot interrupts on device [8086:2034]
[ +0.007078] pci 0000:ae:05.0: disabled boot interrupts on device [8086:2034]
[ +0.007064] pci 0000:d7:05.0: disabled boot interrupts on device [8086:2034]
[ +0.007048] PCI: CLS 0 bytes, default 64
[ +0.003974] Trying to unpack rootfs image as initramfs...
[ +0.443953] Freeing initrd memory: 36732K
[ +0.004061] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ +0.006451] software IO TLB: mapped [mem 0x00000000643ff000-0x00000000683ff000] (64MB)
[ +0.009465] Initialise system trusted keyrings
[ +0.004445] Key type blacklist registered
[ +0.004090] workingset: timestamp_bits=36 max_order=25 bucket_order=0
[ +0.007391] zbud: loaded
[ +0.002762] integrity: Platform Keyring initialized
[ +0.004870] Key type asymmetric registered
[ +0.004090] Asymmetric key parser 'x509' registered
[ +0.004872] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ +0.007444] io scheduler mq-deadline registered
[ +0.005506] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[ +0.005766] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ +0.013776] pcieport 0000:00:1c.4: PME: Signaling with IRQ 25
[ +0.005973] pcieport 0000:00:1c.5: PME: Signaling with IRQ 26
[ +0.006134] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ +0.006703] intel_idle: MWAIT substates: 0x2020
[ +0.000161] Monitor-Mwait will be used to enter C-1 state
[ +0.000017] Monitor-Mwait will be used to enter C-2 state
[ +0.000008] ACPI: \_SB_.SCK0.CP00: Found 2 idle states
[ +0.005132] intel_idle: v0.5.1 model 0x55
[ +0.001710] intel_idle: Local APIC timer is reliable in all C-states
[ +0.004012] ERST: Error Record Serialization Table (ERST) support is initialized.
[ +0.007464] pstore: Registered erst as persistent store backend
[ +0.006162] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ +0.006479] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ +0.013377] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ +0.013333] Linux agpgart interface v0.103
[ +0.004188] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ +0.013117] i8042: PNP: No PS/2 controller found.
[ +0.004829] mousedev: PS/2 mouse device common for all mice
[ +0.005572] rtc_cmos 00:00: RTC can wake from S4
[ +0.005057] rtc_cmos 00:00: registered as rtc0
[ +0.004570] rtc_cmos 00:00: setting system clock to 2024-06-13T18:39:01 UTC (1718303941)
[ +0.008088] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram
[ +0.006691] intel_pstate: Intel P-state driver initializing
[ +0.010292] intel_pstate: HWP enabled
[ +0.005527] ledtrig-cpu: registered to indicate activity on CPUs
[ +0.006370] NET: Registered protocol family 10
[ +0.019305] Segment Routing with IPv6
[ +0.003695] mip6: Mobile IPv6
[ +0.002976] NET: Registered protocol family 17
[ +0.004482] mpls_gso: MPLS GSO support
[ +0.021278] microcode: sig=0x50657, pf=0x1, revision=0x5003605
[ +0.007536] microcode: Microcode Update Driver: v2.2.
[ +0.002637] resctrl: MB allocation detected
[ +0.009225] resctrl: L3 monitoring detected
[ +0.004185] IPI shorthand broadcast: enabled
[ +0.004287] sched_clock: Marking stable (5341997789, 1504861357)->(7159234816, -312375670)
[ +0.008607] registered taskstats version 1
[ +0.004093] Loading compiled-in X.509 certificates
[ +0.045910] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ +0.008709] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[ +0.010471] zswap: loaded using pool lzo/zbud
[ +0.004817] Key type .fscrypt registered
[ +0.003918] Key type fscrypt-provisioning registered
[ +0.005134] pstore: Using crash dump compression: deflate
[ +0.005399] AppArmor: AppArmor sha1 policy hashing enabled
[ +0.009192] clk: Disabling unused clocks
[ +0.005152] Freeing unused decrypted memory: 2036K
[ +0.005544] Freeing unused kernel image (initmem) memory: 2672K
[ +0.025149] Write protecting the kernel read-only data: 22528k
[ +0.007019] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ +0.006927] Freeing unused kernel image (rodata/data gap) memory: 600K
[ +0.022549] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ +0.006427] Run /init as init process
[ +0.003657] with arguments:
[ +0.000000] /init
[ +0.000001] with environment:
[ +0.000001] HOME=/
[ +0.000000] TERM=linux
[ +0.000001] BOOT_IMAGE=/boot/vmlinuz-5.10.0-30-amd64
[ +0.147978] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ +0.008363] pps_core: LinuxPPS API ver. 1 registered
[ +0.004967] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ +0.010288] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ +0.005773] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ +0.006493] SCSI subsystem initialized
[ +0.004041] PTP clock support registered
[ +0.006164] ACPI: bus type USB registered
[ +0.004033] usbcore: registered new interface driver usbfs
[ +0.005245] i2c i2c-0: 4/16 memory slots populated (from DMI)
[ +0.000238] usbcore: registered new interface driver hub
[ +0.005723] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD
[ +0.000014] lpc_ich 0000:00:1f.0: I/O space for ACPI uninitialized
[ +0.005329] usbcore: registered new device driver usb
[ +0.009149] lpc_ich 0000:00:1f.0: No MFD cells added
[ +0.016730] libata version 3.00 loaded.
[ +0.003178] ahci 0000:00:11.5: version 3.0
[ +0.007571] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ +0.005221] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ +0.007529] ahci 0000:00:11.5: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ +0.008164] ahci 0000:00:11.5: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[ +0.010923] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ +0.009109] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ +0.007243] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ +0.005336] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ +0.007416] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ +0.006384] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ +0.008251] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ +0.007202] usb usb1: Product: xHCI Host Controller
[ +0.004868] usb usb1: Manufacturer: Linux 5.10.0-30-amd64 xhci-hcd
[ +0.006162] usb usb1: SerialNumber: 0000:00:14.0
[ +0.004920] hub 1-0:1.0: USB hub found
[ +0.003785] hub 1-0:1.0: 16 ports detected
[ +0.005987] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ +0.008252] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ +0.007208] usb usb2: Product: xHCI Host Controller
[ +0.004866] usb usb2: Manufacturer: Linux 5.10.0-30-amd64 xhci-hcd
[ +0.006164] usb usb2: SerialNumber: 0000:00:14.0
[ +0.004856] hub 2-0:1.0: USB hub found
[ +0.003790] hub 2-0:1.0: 10 ports detected
[ +0.008115] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 2c:ea:7f:68:e4:c2
[ +0.010504] tg3 0000:04:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ +0.009811] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ +0.007807] tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ +0.023589] scsi host0: ahci
[ +0.003251] scsi host1: ahci
[ +0.003408] scsi host2: ahci
[ +0.003261] scsi host3: ahci
[ +0.003181] scsi host4: ahci
[ +0.003200] scsi host5: ahci
[ +0.003000] ata1: SATA max UDMA/133 abar m524288@0x92f80000 port 0x92f80100 irq 27
[ +0.007557] ata2: SATA max UDMA/133 abar m524288@0x92f80000 port 0x92f80180 irq 27
[ +0.007546] ata3: SATA max UDMA/133 abar m524288@0x92f80000 port 0x92f80200 irq 27
[ +0.007548] ata4: SATA max UDMA/133 abar m524288@0x92f80000 port 0x92f80280 irq 27
[ +0.007548] ata5: SATA max UDMA/133 abar m524288@0x92f80000 port 0x92f80300 irq 27
[ +0.007547] ata6: SATA max UDMA/133 abar m524288@0x92f80000 port 0x92f80380 irq 27
[ +0.013591] tsc: Refined TSC clocksource calibration: 2394.374 MHz
[ +0.000748] tg3 0000:04:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 2c:ea:7f:68:e4:c3
[ +0.005482] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x228374dae5d, max_idle_ns: 440795268352 ns
[ +0.010465] tg3 0000:04:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ +0.000004] tg3 0000:04:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ +0.027641] tg3 0000:04:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
[ +0.006788] clocksource: Switched to clocksource tsc
[ +0.000078] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ +0.013070] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[ +0.067849] usb 1-14: new high-speed USB device number 2 using xhci_hcd
[ +0.029784] scsi host6: ahci
[ +0.003276] scsi host7: ahci
[ +0.003280] scsi host8: ahci
[ +0.003215] scsi host9: ahci
[ +0.003217] scsi host10: ahci
[ +0.003355] scsi host11: ahci
[ +0.003316] scsi host12: ahci
[ +0.003412] scsi host13: ahci
[ +0.003028] ata7: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00100 irq 29
[ +0.007565] ata8: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00180 irq 29
[ +0.007565] ata9: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00200 irq 29
[ +0.007575] ata10: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00280 irq 29
[ +0.007662] ata11: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00300 irq 29
[ +0.007653] ata12: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00380 irq 29
[ +0.007658] ata13: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00400 irq 29
[ +0.007653] ata14: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00480 irq 29
[ +0.066060] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ +0.006222] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ +0.006213] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ +0.006201] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ +0.006212] ata1: SATA link down (SStatus 0 SControl 300)
[ +0.000019] usb 1-14: New USB device found, idVendor=1604, idProduct=10c0, bcdDevice= 0.00
[ +0.005431] ata2: SATA link down (SStatus 0 SControl 300)
[ +0.008235] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ +0.005746] ata3.00: ATA-11: HFS1T9G32FEH-BA10A, DD01, max UDMA/133
[ +0.007485] hub 1-14:1.0: USB hub found
[ +0.006005] ata3.00: 3750748848 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ +0.000005] ata4.00: ATA-11: HFS1T9G32FEH-BA10A, DD01, max UDMA/133
[ +0.003910] hub 1-14:1.0: 4 ports detected
[ +0.006797] ata4.00: 3750748848 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ +0.000005] ata6.00: ATA-11: HFS1T9G32FEH-BA10A, DD01, max UDMA/133
[ +0.024216] ata6.00: 3750748848 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ +0.006887] ata5.00: ATA-11: HFS1T9G32FEH-BA10A, DD01, max UDMA/133
[ +0.006617] ata5.00: 3750748848 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ +0.007304] ata3.00: configured for UDMA/133
[ +0.004280] ata4.00: configured for UDMA/133
[ +0.000357] scsi 2:0:0:0: Direct-Access ATA HFS1T9G32FEH-BA1 DD01 PQ: 0 ANSI: 5
[ +0.003944] ata6.00: configured for UDMA/133
[ +0.000148] ata5.00: configured for UDMA/133
[ +0.008549] scsi 3:0:0:0: Direct-Access ATA HFS1T9G32FEH-BA1 DD01 PQ: 0 ANSI: 5
[ +0.016822] scsi 4:0:0:0: Direct-Access ATA HFS1T9G32FEH-BA1 DD01 PQ: 0 ANSI: 5
[ +0.008698] scsi 5:0:0:0: Direct-Access ATA HFS1T9G32FEH-BA1 DD01 PQ: 0 ANSI: 5
[ +0.099955] ata13: SATA link down (SStatus 0 SControl 300)
[ +0.005527] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ +0.006301] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ +0.006209] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ +0.006202] ata14: SATA link down (SStatus 0 SControl 300)
[ +0.005523] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ +0.006200] ata11: SATA link down (SStatus 0 SControl 300)
[ +0.005504] ata12: SATA link down (SStatus 0 SControl 300)
[ +0.005570] ata7.00: failed to read native max address (err_mask=0x1)
[ +0.006442] ata7.00: HPA support seems broken, skipping HPA handling
[ +0.006450] ata8.00: ATA-11: HFS1T9G32FEH-BA10A, DD01, max UDMA/133
[ +0.006629] ata8.00: 3750748848 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ +0.006875] ata10.00: ATA-11: HFS1T9G32FEH-BA10A, DD01, max UDMA/133
[ +0.006695] ata10.00: 3750748848 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ +0.006964] ata9.00: ATA-11: HFS1T9G32FEH-BA10A, DD01, max UDMA/133
[ +0.006609] ata9.00: 3750748848 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ +0.007264] ata8.00: configured for UDMA/133
[ +0.004277] ata9.00: configured for UDMA/133
[ +0.004287] ata10.00: configured for UDMA/133
[ +0.004522] ata7.00: ATA-11: MZ7KH1T9HAJR0D3, HF56, max UDMA/133
[ +0.006352] ata7.00: 3750748848 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ +0.008623] ata7.00: configured for UDMA/133
[ +0.004567] scsi 6:0:0:0: Direct-Access ATA MZ7KH1T9HAJR0D3 HF56 PQ: 0 ANSI: 5
[ +0.008694] scsi 7:0:0:0: Direct-Access ATA HFS1T9G32FEH-BA1 DD01 PQ: 0 ANSI: 5
[ +0.008664] scsi 8:0:0:0: Direct-Access ATA HFS1T9G32FEH-BA1 DD01 PQ: 0 ANSI: 5
[ +0.008669] scsi 9:0:0:0: Direct-Access ATA HFS1T9G32FEH-BA1 DD01 PQ: 0 ANSI: 5
[ +0.011843] tg3 0000:04:00.0 eno1: renamed from eth0
[ +0.015162] sd 7:0:0:0: [sdf] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB)
[ +0.000005] sd 9:0:0:0: [sdh] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB)
[ +0.000004] sd 2:0:0:0: [sda] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB)
[ +0.000002] sd 8:0:0:0: [sdg] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB)
[ +0.000002] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ +0.000002] sd 8:0:0:0: [sdg] 4096-byte physical blocks
[ +0.000033] sd 8:0:0:0: [sdg] Write Protect is off
[ +0.000004] sd 6:0:0:0: [sde] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB)
[ +0.000001] sd 8:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ +0.000002] sd 2:0:0:0: [sda] Write Protect is off
[ +0.000002] sd 6:0:0:0: [sde] 4096-byte physical blocks
[ +0.000002] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ +0.000012] sd 6:0:0:0: [sde] Write Protect is off
[ +0.000002] sd 8:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ +0.000002] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ +0.000008] sd 4:0:0:0: [sdc] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB)
[ +0.000003] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[ +0.000001] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ +0.000003] sd 3:0:0:0: [sdb] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB)
[ +0.000002] sd 5:0:0:0: [sdd] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB)
[ +0.000002] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ +0.000001] sd 5:0:0:0: [sdd] 4096-byte physical blocks
[ +0.000002] sd 6:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ +0.000005] sd 4:0:0:0: [sdc] Write Protect is off
[ +0.000004] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ +0.000008] sd 5:0:0:0: [sdd] Write Protect is off
[ +0.000001] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ +0.000018] sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ +0.000003] sd 3:0:0:0: [sdb] Write Protect is off
[ +0.000003] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ +0.000004] sd 5:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ +0.000036] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ +0.007583] sd 7:0:0:0: [sdf] 4096-byte physical blocks
[ +0.007740] sd 9:0:0:0: [sdh] 4096-byte physical blocks
[ +0.007742] sd 7:0:0:0: [sdf] Write Protect is off
[ +0.007747] sd 9:0:0:0: [sdh] Write Protect is off
[ +0.005226] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ +0.000008] sd 7:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ +0.002195] tg3 0000:04:00.1 eno2: renamed from eth1
[ +0.003042] sd 9:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[ +0.169591] sd 9:0:0:0: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ +0.011386] sde: sde1 sde2
[ +0.004036] sdg: sdg1 sdg2
[ +0.000086] sdd: sdd1 sdd2
[ +0.000018] sda: sda1 sda2
[ +0.000109] sdc: sdc1 sdc2
[ +0.003573] sdb: sdb1 sdb2
[ +0.007939] sdf: sdf1 sdf2
[ +0.012162] sdh: sdh1 sdh2
[ +0.011723] sd 6:0:0:0: [sde] Attached SCSI disk
[ +0.000169] sd 5:0:0:0: [sdd] Attached SCSI disk
[ +0.003861] sd 3:0:0:0: [sdb] Attached SCSI disk
[ +0.000003] sd 8:0:0:0: [sdg] Attached SCSI disk
[ +0.000294] sd 2:0:0:0: [sda] Attached SCSI disk
[ +0.027763] sd 4:0:0:0: [sdc] Attached SCSI disk
[ +0.003731] sd 7:0:0:0: [sdf] Attached SCSI disk
[ +0.012101] sd 9:0:0:0: [sdh] Attached SCSI disk
[ +0.027825] usb 1-14.1: new high-speed USB device number 3 using xhci_hcd
[ +0.007451] md/raid10:md0: active with 4 out of 4 devices
[ +0.000056] md/raid10:md2: active with 3 out of 4 devices
[ +0.000042] md/raid10:md1: active with 4 out of 4 devices
[ +0.000857] md1: detected capacity change from 0 to 3790495285248
[ +0.004492] md0: detected capacity change from 0 to 49962549248
[ +0.009201] md2: detected capacity change from 0 to 3790495285248
[ +0.086067] usb 1-14.1: New USB device found, idVendor=1604, idProduct=10c0, bcdDevice= 0.00
[ +0.008444] usb 1-14.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ +0.008169] hub 1-14.1:1.0: USB hub found
[ +0.004099] hub 1-14.1:1.0: 4 ports detected
[ +0.031099] raid6: avx512x4 gen() 14489 MB/s
[ +0.052027] usb 1-14.4: new high-speed USB device number 4 using xhci_hcd
[ +0.019971] raid6: avx512x4 xor() 7380 MB/s
[ +0.072001] raid6: avx512x2 gen() 17474 MB/s
[ +0.012175] usb 1-14.4: New USB device found, idVendor=1604, idProduct=10c0, bcdDevice= 0.00
[ +0.008448] usb 1-14.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ +0.008112] hub 1-14.4:1.0: USB hub found
[ +0.004085] hub 1-14.4:1.0: 4 ports detected
[ +0.039180] raid6: avx512x2 xor() 25288 MB/s
[ +0.072000] raid6: avx512x1 gen() 17518 MB/s
[ +0.071999] raid6: avx512x1 xor() 22723 MB/s
[ +0.071999] raid6: avx2x4 gen() 17450 MB/s
[ +0.072006] raid6: avx2x4 xor() 7001 MB/s
[ +0.071997] raid6: avx2x2 gen() 17482 MB/s
[ +0.071998] raid6: avx2x2 xor() 16803 MB/s
[ +0.072004] raid6: avx2x1 gen() 13094 MB/s
[ +0.071998] raid6: avx2x1 xor() 16123 MB/s
[ +0.071991] raid6: sse2x4 gen() 10237 MB/s
[ +0.072012] raid6: sse2x4 xor() 6373 MB/s
[ +0.071994] raid6: sse2x2 gen() 11325 MB/s
[ +0.072000] raid6: sse2x2 xor() 6775 MB/s
[ +0.072007] raid6: sse2x1 gen() 10264 MB/s
[ +0.071996] raid6: sse2x1 xor() 5252 MB/s
[ +0.004273] raid6: using algorithm avx512x1 gen() 17518 MB/s
[ +0.005659] raid6: .... xor() 22723 MB/s, rmw enabled
[ +0.005052] raid6: using avx512x2 recovery algorithm
[ +0.006856] xor: automatically using best checksumming function avx
[ +0.008684] async_tx: api initialized (async)
[ +5.455464] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ +0.063239] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ +0.078055] systemd[1]: Inserted module 'autofs4'
[ +0.022172] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ +0.042745] systemd[1]: Detected architecture x86-64.
[ +0.020176] systemd[1]: Set hostname to <aqs1013>.
[ +0.135354] systemd[1]: Queued start job for default target Graphical Interface.
[ +0.008537] systemd[1]: Created slice system-getty.slice.
[ +0.020442] systemd[1]: Created slice system-modprobe.slice.
[ +0.024464] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ +0.023495] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ +0.023918] systemd[1]: Created slice User and Session Slice.
[ +0.023661] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ +0.023958] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ +0.024334] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ +0.027636] systemd[1]: Reached target Local Encrypted Volumes.
[ +0.019992] systemd[1]: Reached target Host and Network Name Lookups.
[ +0.023952] systemd[1]: Reached target Paths.
[ +0.020009] systemd[1]: Reached target Remote File Systems.
[ +0.019996] systemd[1]: Reached target Slices.
[ +0.020010] systemd[1]: Reached target Swap.
[ +0.020813] systemd[1]: Listening on Syslog Socket.
[ +0.019344] systemd[1]: Listening on fsck to fsckd communication Socket.
[ +0.023945] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ +0.024178] systemd[1]: Listening on Journal Audit Socket.
[ +0.019886] systemd[1]: Listening on Journal Socket (/dev/log).
[ +0.024048] systemd[1]: Listening on Journal Socket.
[ +0.020243] systemd[1]: Listening on udev Control Socket.
[ +0.019698] systemd[1]: Listening on udev Kernel Socket.
[ +0.021286] systemd[1]: Mounting Huge Pages File System...
[ +0.020381] systemd[1]: Mounting POSIX Message Queue File System...
[ +0.023692] systemd[1]: Mounting Kernel Debug File System...
[ +0.020144] systemd[1]: Mounting Kernel Trace File System...
[ +0.020013] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ +0.027847] systemd[1]: Starting Load Kernel Module configfs...
[ +0.019918] systemd[1]: Starting Load Kernel Module drm...
[ +0.020522] systemd[1]: Starting Load Kernel Module fuse...
[ +0.006099] ACPI: bus type drm_connector registered
[ +0.010789] fuse: init (API version 7.32)
[ +0.009932] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ +0.009119] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ +0.011198] systemd[1]: Starting Journal Service...
[ +0.020413] systemd[1]: Starting Load Kernel Modules...
[ +0.019948] systemd[1]: Starting Remount Root and Kernel File Systems...
[ +0.010799] IPMI message handler: version 39.2
[ +0.003088] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
[ +0.010114] ipmi device interface
[ +0.016035] systemd[1]: Starting Coldplug All udev Devices...
[ +0.021299] systemd[1]: Started Journal Service.
[ +0.224260] systemd-journald[640]: Received client request to flush runtime journal.
[ +0.013428] systemd-journald[640]: File /var/log/journal/6073117b1fd94edfaa3c6c03bc10df93/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ +0.330528] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ +0.013212] ACPI: Power Button [PWRF]
[ +0.130143] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ +0.002642] ipmi_si: IPMI System Interface driver
[ +0.000036] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
[ +0.000006] ipmi_platform: ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 10
[ +0.000003] ipmi_si: Adding SMBIOS-specified kcs state machine
[ +0.000066] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ +0.000089] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
[ +0.000449] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca8] regsize 1 spacing 4 irq 10
[ +0.000736] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ +0.000094] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ +0.000094] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ +0.000110] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ +0.000128] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ +0.000169] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ +0.000109] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ +0.000129] sd 9:0:0:0: Attached scsi generic sg7 type 0
[ +0.000859] iTCO_vendor_support: vendor-support=0
[ +0.001243] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer
[ +0.000004] RAPL PMU: hw unit of domain package 2^-14 Joules
[ +0.000002] RAPL PMU: hw unit of domain dram 2^-16 Joules
[ +0.006348] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ +0.000170] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ +0.001429] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ +0.003459] cryptd: max_cpu_qlen set to 1000
[ +0.001614] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[ +0.000353] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
[ +0.000002] ipmi_si: Adding ACPI-specified kcs state machine
[ +0.000188] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 10
[ +0.012377] mgag200 0000:03:00.0: vgaarb: deactivate vga console
[ +0.001625] AVX2 version of gcm_enc/dec engaged.
[ +0.000001] AES CTR mode by8 optimization enabled
[ +0.003847] Console: switching to colour dummy device 80x25
[ +0.005063] [drm] Initialized mgag200 1.0.0 20110418 for 0000:03:00.0 on minor 0
[ +0.033042] fbcon: mgag200drmfb (fb0) is primary device
[ +0.376814] EDAC MC0: Giving out device to module skx_edac controller Skylake Socket#0 IMC#0: DEV 0000:3a:0a.0 (INTERRUPT)
[ +0.000019] EDAC MC1: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1: DEV 0000:3a:0c.0 (INTERRUPT)
[ +0.000043] EDAC MC2: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0: DEV 0000:ae:0a.0 (INTERRUPT)
[ +0.000014] EDAC MC3: Giving out device to module skx_edac controller Skylake Socket#1 IMC#1: DEV 0000:ae:0c.0 (INTERRUPT)
[ +0.008232] ipmi_si IPI0001:00: The BMC does not support setting the recv irq bit, compensating, but the BMC needs to be fixed.
[ +0.007272] intel_rapl_common: Found RAPL domain package
[ +0.000007] intel_rapl_common: Found RAPL domain dram
[ +0.000002] intel_rapl_common: DRAM domain energy unit 15300pj
[ +0.000124] Console: switching to colour frame buffer device 160x64
[ +0.000047] intel_rapl_common: Found RAPL domain package
[ +0.000013] intel_rapl_common: Found RAPL domain dram
[ +0.000005] intel_rapl_common: DRAM domain energy unit 15300pj
[ +0.027824] mgag200 0000:03:00.0: [drm] fb0: mgag200drmfb frame buffer device
[ +0.112736] ipmi_si IPI0001:00: Using irq 10
[ +0.035476] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
[ +0.074181] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ +0.003780] ipmi_ssif: IPMI SSIF Interface driver
[ +0.091975] md: recovery of RAID array md2
[ +0.282737] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)
[ +0.540878] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
[ +0.971486] Process accounting resumed
[ +2.689083] tg3 0000:04:00.0 eno1: Link is up at 1000 Mbps, full duplex
[ +0.000017] tg3 0000:04:00.0 eno1: Flow control is off for TX and off for RX
[ +0.000004] tg3 0000:04:00.0 eno1: EEE is disabled
[ +0.000053] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[Jun13 23:07] perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[Jun14 00:55] perf: interrupt took too long (3151 > 3137), lowering kernel.perf_event_max_sample_rate to 63250
[Jun14 01:33] perf: interrupt took too long (4107 > 3938), lowering kernel.perf_event_max_sample_rate to 48500
[Jun14 06:25] Process accounting resumed
[Jun14 11:31] perf: interrupt took too long (5140 > 5133), lowering kernel.perf_event_max_sample_rate to 38750
[Jun14 19:29] md: md2: recovery done.
[Jun15 06:25] Process accounting resumed
[Jun16 06:25] Process accounting resumed
[Jun17 00:48] ata7.00: exception Emask 0x0 SAct 0xffffffff SErr 0x0 action 0x6 frozen
[ +0.007747] ata7.00: failed command: SEND FPDMA QUEUED
[ +0.005241] ata7.00: cmd 64/01:00:00:00:00/00:00:00:00:00/a0 tag 0 ncq dma 512 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015108] ata7.00: status: { DRDY }
[ +0.003754] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005232] ata7.00: cmd 60/38:08:10:5a:12/00:00:dd:00:00/40 tag 1 ncq dma 28672 in
res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015200] ata7.00: status: { DRDY }
[ +0.003753] ata7.00: failed command: SEND FPDMA QUEUED
[ +0.005248] ata7.00: cmd 64/01:10:00:00:00/00:00:00:00:00/a0 tag 2 ncq dma 512 out
res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015126] ata7.00: status: { DRDY }
[ +0.003771] ata7.00: failed command: SEND FPDMA QUEUED
[ +0.005243] ata7.00: cmd 64/01:18:00:00:00/00:00:00:00:00/a0 tag 3 ncq dma 512 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015106] ata7.00: status: { DRDY }
[ +0.003754] ata7.00: failed command: SEND FPDMA QUEUED
[ +0.005224] ata7.00: cmd 64/01:20:00:00:00/00:00:00:00:00/a0 tag 4 ncq dma 512 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015128] ata7.00: status: { DRDY }
[ +0.003777] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005234] ata7.00: cmd 60/08:28:28:95:c8/00:00:26:00:00/40 tag 5 ncq dma 4096 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015175] ata7.00: status: { DRDY }
[ +0.003759] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005246] ata7.00: cmd 60/08:30:48:95:c8/00:00:26:00:00/40 tag 6 ncq dma 4096 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015123] ata7.00: status: { DRDY }
[ +0.003768] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005238] ata7.00: cmd 60/08:38:28:be:5f/00:00:06:00:00/40 tag 7 ncq dma 4096 in
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015142] ata7.00: status: { DRDY }
[ +0.003767] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005252] ata7.00: cmd 60/08:40:68:be:5f/00:00:06:00:00/40 tag 8 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015173] ata7.00: status: { DRDY }
[ +0.003753] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005229] ata7.00: cmd 60/08:48:90:be:5f/00:00:06:00:00/40 tag 9 ncq dma 4096 in
res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015129] ata7.00: status: { DRDY }
[ +0.003769] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005229] ata7.00: cmd 60/18:50:b0:be:5f/00:00:06:00:00/40 tag 10 ncq dma 12288 in
res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015338] ata7.00: status: { DRDY }
[ +0.003752] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005228] ata7.00: cmd 60/08:58:70:81:fe/00:00:26:00:00/40 tag 11 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015218] ata7.00: status: { DRDY }
[ +0.003762] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005252] ata7.00: cmd 60/08:60:90:81:fe/00:00:26:00:00/40 tag 12 ncq dma 4096 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015225] ata7.00: status: { DRDY }
[ +0.003763] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005237] ata7.00: cmd 60/08:68:b0:81:fe/00:00:26:00:00/40 tag 13 ncq dma 4096 in
res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015259] ata7.00: status: { DRDY }
[ +0.003761] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005226] ata7.00: cmd 60/08:70:e0:81:fe/00:00:26:00:00/40 tag 14 ncq dma 4096 in
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015211] ata7.00: status: { DRDY }
[ +0.003771] ata7.00: failed command: WRITE FPDMA QUEUED
[ +0.005348] ata7.00: cmd 61/d8:78:28:10:b0/03:00:13:00:00/40 tag 15 ncq dma 503808 out
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015460] ata7.00: status: { DRDY }
[ +0.003788] ata7.00: failed command: WRITE FPDMA QUEUED
[ +0.005358] ata7.00: cmd 61/30:80:00:14:b0/00:00:13:00:00/40 tag 16 ncq dma 24576 out
res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015415] ata7.00: status: { DRDY }
[ +0.003768] ata7.00: failed command: WRITE FPDMA QUEUED
[ +0.005337] ata7.00: cmd 61/50:88:30:14:b0/03:00:13:00:00/40 tag 17 ncq dma 434176 out
res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015474] ata7.00: status: { DRDY }
[ +0.003777] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005245] ata7.00: cmd 60/08:90:10:82:fe/00:00:26:00:00/40 tag 18 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015235] ata7.00: status: { DRDY }
[ +0.003768] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005228] ata7.00: cmd 60/08:98:98:62:14/00:00:05:00:00/40 tag 19 ncq dma 4096 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015211] ata7.00: status: { DRDY }
[ +0.003759] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005244] ata7.00: cmd 60/08:a0:30:82:fe/00:00:26:00:00/40 tag 20 ncq dma 4096 in
res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015225] ata7.00: status: { DRDY }
[ +0.003774] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005270] ata7.00: cmd 60/10:a8:50:82:fe/00:00:26:00:00/40 tag 21 ncq dma 8192 in
res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015218] ata7.00: status: { DRDY }
[ +0.003758] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005227] ata7.00: cmd 60/28:b0:d0:58:12/00:00:dd:00:00/40 tag 22 ncq dma 20480 in
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015296] ata7.00: status: { DRDY }
[ +0.003770] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005243] ata7.00: cmd 60/30:b8:00:59:12/00:00:dd:00:00/40 tag 23 ncq dma 24576 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015315] ata7.00: status: { DRDY }
[ +0.003759] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005230] ata7.00: cmd 60/18:c0:98:82:fe/00:00:26:00:00/40 tag 24 ncq dma 12288 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015287] ata7.00: status: { DRDY }
[ +0.003768] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005247] ata7.00: cmd 60/08:c8:b8:bd:5f/00:00:06:00:00/40 tag 25 ncq dma 4096 in
res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015224] ata7.00: status: { DRDY }
[ +0.003759] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005238] ata7.00: cmd 60/08:d0:e0:bd:5f/00:00:06:00:00/40 tag 26 ncq dma 4096 in
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015203] ata7.00: status: { DRDY }
[ +0.003767] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005253] ata7.00: cmd 60/38:d8:38:59:12/00:00:dd:00:00/40 tag 27 ncq dma 28672 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015314] ata7.00: status: { DRDY }
[ +0.003762] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005244] ata7.00: cmd 60/20:e0:78:59:12/00:00:dd:00:00/40 tag 28 ncq dma 16384 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015330] ata7.00: status: { DRDY }
[ +0.003762] ata7.00: failed command: SEND FPDMA QUEUED
[ +0.005244] ata7.00: cmd 64/01:e8:00:00:00/00:00:00:00:00/a0 tag 29 ncq dma 512 out
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015201] ata7.00: status: { DRDY }
[ +0.003758] ata7.00: failed command: SEND FPDMA QUEUED
[ +0.005258] ata7.00: cmd 64/01:f0:00:00:00/00:00:00:00:00/a0 tag 30 ncq dma 512 out
res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015256] ata7.00: status: { DRDY }
[ +0.003771] ata7.00: failed command: READ FPDMA QUEUED
[ +0.005238] ata7.00: cmd 60/20:f8:d8:59:12/00:00:dd:00:00/40 tag 31 ncq dma 16384 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ +0.015303] ata7.00: status: { DRDY }
[ +0.003757] ata7: hard resetting link
[ +5.352037] ata7: link is slow to respond, please be patient (ready=0)
[ +4.683915] ata7: COMRESET failed (errno=-16)
[ +0.004464] ata7: hard resetting link
[ +5.351536] ata7: link is slow to respond, please be patient (ready=0)
[ +4.695975] ata7: COMRESET failed (errno=-16)
[ +0.004474] ata7: hard resetting link
[ +5.351425] ata7: link is slow to respond, please be patient (ready=0)
[Jun17 00:49] ata7: COMRESET failed (errno=-16)
[ +0.004469] ata7: limiting SATA link speed to 3.0 Gbps
[ +0.000003] ata7: hard resetting link
[ +5.047474] ata7: COMRESET failed (errno=-16)
[ +0.004508] ata7: reset failed, giving up
[ +0.004128] ata7.00: disabled
[ +0.000161] ata7: EH complete
[ +0.000064] sd 6:0:0:0: [sde] tag#28 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000011] sd 6:0:0:0: [sde] tag#28 CDB: Read(10) 28 00 06 e1 d8 68 00 00 18 00
[ +0.000008] blk_update_request: I/O error, dev sde, sector 115464296 op 0x0:(READ) flags 0x0 phys_seg 3 prio class 0
[ +0.000030] blk_update_request: I/O error, dev sde, sector 106938136 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.000007] sd 6:0:0:0: [sde] tag#21 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000003] sd 6:0:0:0: [sde] tag#31 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000003] sd 6:0:0:0: [sde] tag#1 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000003] sd 6:0:0:0: [sde] tag#29 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000002] sd 6:0:0:0: [sde] tag#21 CDB: Read(10) 28 00 ba 8c f4 58 00 00 08 00
[ +0.000003] sd 6:0:0:0: [sde] tag#31 CDB: Read(10) 28 00 ba d7 08 38 00 00 08 00
[ +0.000002] sd 6:0:0:0: [sde] tag#1 CDB: Read(10) 28 00 24 aa a3 c8 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 3129799768 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.000002] sd 6:0:0:0: [sde] tag#29 CDB: Read(10) 28 00 0f 49 bb 80 00 00 10 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 3134654520 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.000004] blk_update_request: I/O error, dev sde, sector 615162824 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.000003] sd 6:0:0:0: [sde] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000002] sd 6:0:0:0: [sde] tag#10 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000006] blk_update_request: I/O error, dev sde, sector 256490368 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[ +0.000003] md/raid10:md2: sde2: rescheduling sector 6161414232
[ +0.000002] md/raid10:md2: sde2: rescheduling sector 6171123768
[ +0.000003] md/raid10:md2: sde2: rescheduling sector 1132139464
[ +0.000002] sd 6:0:0:0: [sde] tag#11 CDB: Read(10) 28 00 d3 97 af f0 00 00 08 00
[ +0.000001] sd 6:0:0:0: [sde] tag#10 CDB: Read(10) 28 00 bd c9 eb f8 00 00 08 00
[ +0.000004] md/raid10:md2: sde2: rescheduling sector 414794624
[ +0.000005] blk_update_request: I/O error, dev sde, sector 3549933552 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.000005] blk_update_request: I/O error, dev sde, sector 3184126968 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.000003] sd 6:0:0:0: [sde] tag#2 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000002] sd 6:0:0:0: [sde] tag#22 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000003] md/raid10:md2: sde2: rescheduling sector 7001680880
[ +0.000002] sd 6:0:0:0: [sde] tag#30 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000003] md/raid10:md2: sde2: rescheduling sector 6270067704
[ +0.000003] sd 6:0:0:0: [sde] tag#2 CDB: Read(10) 28 00 24 aa a3 e8 00 00 08 00
[ +0.000002] sd 6:0:0:0: [sde] tag#22 CDB: Read(10) 28 00 ba 8c f4 e0 00 00 18 00
[ +0.000003] sd 6:0:0:0: [sde] tag#30 CDB: Read(10) 28 00 0f 49 bb b0 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 615162856 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.000004] blk_update_request: I/O error, dev sde, sector 3129799904 op 0x0:(READ) flags 0x0 phys_seg 3 prio class 0
[ +0.000002] md/raid10:md2: sde2: rescheduling sector 414794672
[ +0.000003] md/raid10:md2: sde2: rescheduling sector 7319749080
[ +0.000004] md/raid10:md2: sde2: rescheduling sector 1132139496
[ +0.000002] md/raid10:md2: sde2: rescheduling sector 6161414368
[ +0.000236] md: super_written gets error=-5
[ +0.000007] md/raid10:md2: Disk failure on sde2, disabling device.
md/raid10:md2: Operation continuing on 3 devices.
[ +0.182473] md/raid10:md2: sdf2: redirecting sector 6161414232 to another mirror
[ +0.012558] md/raid10:md2: sdf2: redirecting sector 6171123768 to another mirror
[ +0.007776] md/raid10:md2: sdf2: redirecting sector 1132139464 to another mirror
[ +0.008154] md/raid10:md2: sdf2: redirecting sector 414794624 to another mirror
[ +0.010277] md/raid10:md2: sdf2: redirecting sector 7001680880 to another mirror
[ +0.008938] md/raid10:md2: sdf2: redirecting sector 6270067704 to another mirror
[ +0.010136] md/raid10:md2: sdf2: redirecting sector 414794672 to another mirror
[ +0.008830] md/raid10:md2: sdf2: redirecting sector 7319749080 to another mirror
[ +0.009097] md/raid10:md2: sdf2: redirecting sector 414794704 to another mirror
[ +0.008696] md/raid10:md2: sdf2: redirecting sector 1132139496 to another mirror
[Jun17 01:02] scsi_io_completion_action: 62 callbacks suppressed
[ +0.000006] sd 6:0:0:0: [sde] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000005] sd 6:0:0:0: [sde] tag#23 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000001] print_req_error: 63 callbacks suppressed
[ +0.000002] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010921] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000006] sd 6:0:0:0: [sde] tag#6 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000003] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010546] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 01:09] sd 6:0:0:0: [sde] tag#24 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000010] sd 6:0:0:0: [sde] tag#24 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 01:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000014] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000006] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.034068] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000013] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000010] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 01:32] sd 6:0:0:0: [sde] tag#26 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#26 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010937] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#7 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010551] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 01:39] sd 6:0:0:0: [sde] tag#4 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000004] sd 6:0:0:0: [sde] tag#4 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 02:02] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#7 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010949] sd 6:0:0:0: [sde] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#16 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000008] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010544] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 02:09] sd 6:0:0:0: [sde] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000009] sd 6:0:0:0: [sde] tag#0 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 02:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000013] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000008] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.031561] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000018] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000008] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 02:33] sd 6:0:0:0: [sde] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000009] sd 6:0:0:0: [sde] tag#5 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010994] sd 6:0:0:0: [sde] tag#27 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#27 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010552] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 02:39] sd 6:0:0:0: [sde] tag#21 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000006] sd 6:0:0:0: [sde] tag#21 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 03:03] sd 6:0:0:0: [sde] tag#28 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000005] sd 6:0:0:0: [sde] tag#28 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000003] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010951] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000009] sd 6:0:0:0: [sde] tag#6 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010550] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 03:09] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#7 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 03:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000014] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000007] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.032674] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000019] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000007] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 03:32] sd 6:0:0:0: [sde] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000009] sd 6:0:0:0: [sde] tag#0 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010914] sd 6:0:0:0: [sde] tag#8 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000004] sd 6:0:0:0: [sde] tag#8 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000004] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010521] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 03:39] sd 6:0:0:0: [sde] tag#29 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#29 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 04:02] sd 6:0:0:0: [sde] tag#1 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#1 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000004] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.011028] sd 6:0:0:0: [sde] tag#9 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#9 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010554] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 04:09] sd 6:0:0:0: [sde] tag#31 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#31 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 04:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000013] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000008] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.029781] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000013] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000007] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 04:32] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#6 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000004] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.011007] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000016] sd 6:0:0:0: [sde] tag#14 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000008] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010555] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 04:39] sd 6:0:0:0: [sde] tag#8 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000009] sd 6:0:0:0: [sde] tag#8 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 05:03] sd 6:0:0:0: [sde] tag#22 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000006] sd 6:0:0:0: [sde] tag#22 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010992] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000011] sd 6:0:0:0: [sde] tag#7 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000012] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010540] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 05:09] sd 6:0:0:0: [sde] tag#2 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000009] sd 6:0:0:0: [sde] tag#2 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 05:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000016] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000008] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.019286] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000010] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000006] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 05:32] sd 6:0:0:0: [sde] tag#12 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000006] sd 6:0:0:0: [sde] tag#12 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000003] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.011005] sd 6:0:0:0: [sde] tag#3 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#3 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010551] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 05:39] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#7 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 06:02] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000009] sd 6:0:0:0: [sde] tag#6 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.011018] sd 6:0:0:0: [sde] tag#1 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#1 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010542] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 06:09] sd 6:0:0:0: [sde] tag#17 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#17 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 06:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000013] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000008] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.029851] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000018] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000007] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 06:25] Process accounting resumed
[Jun17 06:32] sd 6:0:0:0: [sde] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000006] sd 6:0:0:0: [sde] tag#13 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000003] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010951] sd 6:0:0:0: [sde] tag#4 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#4 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000009] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010540] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 06:39] sd 6:0:0:0: [sde] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#15 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 07:03] sd 6:0:0:0: [sde] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#5 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010991] sd 6:0:0:0: [sde] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#16 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010541] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 07:09] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#14 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 07:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000014] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000006] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.029600] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000011] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000008] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 07:33] sd 6:0:0:0: [sde] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#23 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.011006] sd 6:0:0:0: [sde] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#15 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000009] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010553] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 07:39] sd 6:0:0:0: [sde] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#15 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 08:03] sd 6:0:0:0: [sde] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000006] sd 6:0:0:0: [sde] tag#18 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000004] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010991] sd 6:0:0:0: [sde] tag#17 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#17 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010542] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 08:09] sd 6:0:0:0: [sde] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000004] sd 6:0:0:0: [sde] tag#5 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 08:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000015] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000007] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.031299] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000013] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000007] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 08:32] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000004] sd 6:0:0:0: [sde] tag#7 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000003] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010965] sd 6:0:0:0: [sde] tag#28 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000009] sd 6:0:0:0: [sde] tag#28 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010547] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 08:39] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000004] sd 6:0:0:0: [sde] tag#6 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 09:02] sd 6:0:0:0: [sde] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000006] sd 6:0:0:0: [sde] tag#0 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000004] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010991] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000011] sd 6:0:0:0: [sde] tag#7 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000013] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010549] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 09:09] sd 6:0:0:0: [sde] tag#29 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#29 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 09:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000017] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000007] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.030720] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000014] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000007] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 09:32] sd 6:0:0:0: [sde] tag#20 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000005] sd 6:0:0:0: [sde] tag#20 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000003] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010948] sd 6:0:0:0: [sde] tag#21 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#21 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000008] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010539] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 09:39] sd 6:0:0:0: [sde] tag#4 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#4 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 10:02] sd 6:0:0:0: [sde] tag#12 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#12 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010987] sd 6:0:0:0: [sde] tag#22 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000019] sd 6:0:0:0: [sde] tag#22 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000018] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010541] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 10:09] sd 6:0:0:0: [sde] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#5 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 10:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000012] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000005] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.028781] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000012] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000007] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 10:32] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#7 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.011030] sd 6:0:0:0: [sde] tag#22 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#22 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010542] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 10:39] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000004] sd 6:0:0:0: [sde] tag#6 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 11:02] sd 6:0:0:0: [sde] tag#30 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#30 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.011000] sd 6:0:0:0: [sde] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#13 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010539] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 11:09] sd 6:0:0:0: [sde] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000005] sd 6:0:0:0: [sde] tag#11 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 11:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000013] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000008] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.031591] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000012] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000008] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 11:33] sd 6:0:0:0: [sde] tag#21 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000009] sd 6:0:0:0: [sde] tag#21 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010946] sd 6:0:0:0: [sde] tag#29 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000015] sd 6:0:0:0: [sde] tag#29 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010545] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 11:39] sd 6:0:0:0: [sde] tag#31 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000006] sd 6:0:0:0: [sde] tag#31 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 12:02] sd 6:0:0:0: [sde] tag#27 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000006] sd 6:0:0:0: [sde] tag#27 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000004] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010996] sd 6:0:0:0: [sde] tag#9 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000015] sd 6:0:0:0: [sde] tag#9 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000009] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010555] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 12:09] sd 6:0:0:0: [sde] tag#28 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000005] sd 6:0:0:0: [sde] tag#28 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 12:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000012] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000005] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.030187] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000017] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000006] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 12:32] sd 6:0:0:0: [sde] tag#22 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000006] sd 6:0:0:0: [sde] tag#22 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000004] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010955] sd 6:0:0:0: [sde] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000010] sd 6:0:0:0: [sde] tag#13 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010547] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 12:39] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000003] sd 6:0:0:0: [sde] tag#14 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 13:02] sd 6:0:0:0: [sde] tag#10 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#10 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000004] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.011005] sd 6:0:0:0: [sde] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#23 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010553] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 13:09] sd 6:0:0:0: [sde] tag#12 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000004] sd 6:0:0:0: [sde] tag#12 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 13:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000015] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000006] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.017575] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000017] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000006] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 13:33] sd 6:0:0:0: [sde] tag#27 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#27 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000004] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010946] sd 6:0:0:0: [sde] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#13 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010542] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 13:39] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000004] sd 6:0:0:0: [sde] tag#14 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 14:02] sd 6:0:0:0: [sde] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#15 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000004] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010955] sd 6:0:0:0: [sde] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000009] sd 6:0:0:0: [sde] tag#23 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010537] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 14:09] sd 6:0:0:0: [sde] tag#4 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000003] sd 6:0:0:0: [sde] tag#4 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 14:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000012] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000007] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.031088] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000013] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000008] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 14:32] sd 6:0:0:0: [sde] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#5 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010991] sd 6:0:0:0: [sde] tag#31 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000007] sd 6:0:0:0: [sde] tag#31 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010554] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 14:39] sd 6:0:0:0: [sde] tag#12 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000008] sd 6:0:0:0: [sde] tag#12 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 15:02] sd 6:0:0:0: [sde] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000009] sd 6:0:0:0: [sde] tag#13 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010988] sd 6:0:0:0: [sde] tag#1 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000010] sd 6:0:0:0: [sde] tag#1 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010548] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 15:09] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000004] sd 6:0:0:0: [sde] tag#14 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 15:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000014] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000005] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.029792] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000011] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000007] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[Jun17 15:32] sd 6:0:0:0: [sde] tag#28 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000004] sd 6:0:0:0: [sde] tag#28 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000003] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010993] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000009] sd 6:0:0:0: [sde] tag#6 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000008] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010544] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 15:39] sd 6:0:0:0: [sde] tag#20 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000004] sd 6:0:0:0: [sde] tag#20 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 16:03] sd 6:0:0:0: [sde] tag#2 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000006] sd 6:0:0:0: [sde] tag#2 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000005] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ +0.010994] sd 6:0:0:0: [sde] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000013] sd 6:0:0:0: [sde] tag#23 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00
[ +0.000013] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ +0.010543] Buffer I/O error on dev sde1, logical block 6103280, async page read
[Jun17 16:09] sd 6:0:0:0: [sde] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[ +0.000004] sd 6:0:0:0: [sde] tag#18 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[Jun17 16:22] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000013] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000008] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.030806] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000014] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ +0.000006] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO

File Metadata

Mime Type
text/plain
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
18220110
Default Alt Text
dmesg.txt (139 KB)

Event Timeline

Content licensed under Creative Commons Attribution-ShareAlike (CC BY-SA) 4.0 unless otherwise noted; code licensed under GNU General Public License (GPL) 2.0 or later and other open source licenses. By using this site, you agree to the Terms of Use, Privacy Policy, and Code of Conduct. · Wikimedia Foundation · Privacy Policy · Code of Conduct · Terms of Use · Disclaimer · CC-BY-SA · GPL · Credits