Ok, this one is slightly confusing when taken in with all the other labs requests, so I had to put all of them in to a single spreadsheet with the CPU/memory/disk/nic requirements.

After doing that, the following tasks have some shared specifications and their shared requirements break down as follows:

While the specifications vary somewhat, the CPU model is the same thoughout (requires 12 cores per cpu between 2.0-2.6 GHz, whatever best priced), so they should all have the same CPU (just some have dual cpu, while specifcation 1 has single CPU).

Specification 1
Quantity: 5
1U system (R430 preferred)
Single CPU at 12 cores, somewhere between 2.0 and 2.6GHz (whatever the best/cheapest to meet this requirement.)
64 GB RAM
onboard 1Gbps NIC
4 * 1TB SFF SATA HDDs

Specification 2
Quantity: 2
1U system (R430 preferred)
Dual CPU at 12 cores, somewhere between 2.0 and 2.6GHz (whatever the best/cheapest to meet this requirement.)
64 GB RAM
onboard 1Gbps NIC
4 * 1TB SFF SATA HDDs

Specification 3
Quantity: 2
1U system (R430 preferred)
Dual CPU at 12 cores, somewhere between 2.0 and 2.6GHz (whatever the best/cheapest to meet this requirement.)
128 GB RAM
onboard 1Gbps NIC
4 * 1TB SFF SATA HDDs

Specification 4
Quantity: 2
1U system (R430 preferred)
Dual CPU at 12 cores, somewhere between 2.0 and 2.6GHz (whatever the best/cheapest to meet this requirement.)
128 GB RAM
onboard 1Gbps NIC
4 * 4TB SFF SATA HDDs

Since the spread of those systems is between codfw and eqiad, my plan is to get the quotes with the specifications and total quantities back from the first round of Dell pricing, and then create the procurement tasks split to the proper sites. The initial quote requests have been sent off, and I've moved all of the affected tasks from 'backlog' to 'in discussion' on the hardware-requests workboard.

@RobH note respec @ 64GB RAM