I am creating this task for the record just in case this happens again, if so, we might need to contact the vendor.
db2059 crashed over night, there is nothing on the OS logs, but this is what the HW logs are saying:
</system1/log1>hpiLO-> show record5
status=0
status_tag=COMMAND COMPLETED
Fri Nov 10 07:31:25 2017
/system1/log1/record5
Targets
Properties
number=5
severity=Critical
date=11/10/2017
time=03:40
description=Drive Array Controller Failure (Slot 0)
Verbs
cd version exit show set
</system1/log1>hpiLO-> show record6
status=0
status_tag=COMMAND COMPLETED
Fri Nov 10 07:31:33 2017
/system1/log1/record6
Targets
Properties
number=6
severity=Caution
date=11/10/2017
time=07:24
description=POST Error: 1719-A controller failure event occurred prior to this power-up
Verbs
cd version exit show setI rebooted the server twice and it all went fine.
Disks also look fine
root@db2059:~# hpssacli controller all show config
Smart Array P420i in Slot 0 (Embedded) (sn: 0014380337F5E40)
Port Name: 1I
Port Name: 2I
Gen8 ServBP 12+2 at Port 1I, Box 1, OK
array A (SAS, Unused Space: 0 MB)
logicaldrive 1 (3.3 TB, RAID 1+0, OK)
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 600 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 600 GB, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 600 GB, OK)
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 600 GB, OK)
physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 600 GB, OK)
physicaldrive 1I:1:6 (port 1I:box 1:bay 6, SAS, 600 GB, OK)
physicaldrive 1I:1:7 (port 1I:box 1:bay 7, SAS, 600 GB, OK)
physicaldrive 1I:1:8 (port 1I:box 1:bay 8, SAS, 600 GB, OK)
physicaldrive 1I:1:9 (port 1I:box 1:bay 9, SAS, 600 GB, OK)
physicaldrive 1I:1:10 (port 1I:box 1:bay 10, SAS, 600 GB, OK)
physicaldrive 1I:1:11 (port 1I:box 1:bay 11, SAS, 600 GB, OK)
physicaldrive 1I:1:12 (port 1I:box 1:bay 12, SAS, 600 GB, OK)
Enclosure SEP (Vendor ID HP, Model Gen8 ServBP 12+2) 378 (WWID: 50014380324D8C59, Port: 1I, Box: 1)
Expander 380 (WWID: 50014380324D8C40, Port: 1I, Box: 1)
SEP (Vendor ID PMCSIERA, Model SRCv8x6G) 379 (WWID: 50014380337F5E4F)
root@db2059:~# hpssacli controller all show detail
Smart Array P420i in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0
Serial Number: 0014380337F5E40
Cache Serial Number: PBKUC0BRH7NBVQ
RAID 6 (ADG) Status: Enabled
Controller Status: OK
Hardware Revision: B
Firmware Version: 6.00
Rebuild Priority: Low
Expand Priority: Medium