I previosuly sent papaul the instructions I previously wrote for Equinix's remote hands.
Here they are:
In shipment with inbound ticket 1-127228694943 we received the following transceivers: 5*SFPP-10GE-LR and 4*QFX-SFP-1GE-T This order is about replacing existing transceivers with those. On the device labeled cr1-eqsin, Juniper MX104, top of rack 603, please replace the 4 optics present in the embedded ports (aka not in modules) labeled xe-2/0/0 to xe-2/0/3 with the SFPP-10GE-LR optics. On the device labeled asw-0603-eqsin, Juniper EX4600, rack 603, please replace the SFP-T (copper SFPs) present in ports 12, 14 and 23 with the QFX-SFP-1GE-T transceivers. And get rid of the old SFP-Ts. On the device labeled asw-0604-eqsin, Juniper EX4600, rack 604, please replace the SFP-T (copper SFPs) present in ports 22 with a QFX-SFP-1GE-T transceiver. And get rid of the old SFP-T. Please store the spare SFPs at the bottom of rack 604. All of the above can be done anytime. The site is not in production yet. Thank you.
Missing line was:
- once all is done, ensure all spare hardware in the racks are on the spare hardware tracking page.