Page MenuHomePhabricator

etcd1004-1006 is unused and idle, use the cluster or kill it.
Closed, ResolvedPublic

Description

etcd1004 to etcd1006 cluster is not used anywhere. I think the intent was to use this cluster for storing calico configuration but calico was configured to use the main etcd cluster since there are no "networking" etcd cluster over codfw.

giving that we should update Calico to Calicov3 and store network endpoints using the kubernetes API instead of etcd it probably should be decomissioned.


This task will track the decommission-hardware of server etcd1004.eqiad.wmnet

The first 5 steps should be completed by the service owner that is returning the server to DC-ops (for reclaim to spare or decommissioning, dependent on server configuration and age.)

etcd1004.eqiad.wmnet

Steps for service owner:

  • - all system services confirmed offline from production use
  • - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place.
  • - remove system from all lvs/pybal active configuration
  • - any service group puppet/hiera/dsh config removed
  • - remove site.pp, replace with role(spare::system)
  • - unassign service owner from this task, check off completed steps, and assign to @RobH for followup on below steps.

Steps for DC-Ops:

The following steps cannot be interrupted, as it will leave the system in an unfinished state.

Start non-interrupt steps:

  • - disable puppet on host
  • - power down host
  • - update netbox status to Inventory (if decom) or Planned (if spare)
  • - disable switch port
  • - switch port assignment noted on this task (for later removal)
  • - remove all remaining puppet references (include role::spare)
  • - remove production dns entries
  • - puppet node clean, puppet node deactivate (handled by wmf-decommission-host)
  • - remove dbmonitor entries on neodymium/sarin: sudo curl -X DELETE https://debmonitor.discovery.wmnet/hosts/${HOST_FQDN} --cert /etc/debmonitor/ssl/cert.pem --key /etc/debmonitor/ssl/server.key (handled by wmf-decommission-host)

End non-interrupt steps.

  • - system disks wiped (by onsite)
  • - IF DECOM: system unracked and decommissioned (by onsite), update racktables with result
  • - IF DECOM: switch port configration removed from switch once system is unracked.
  • - IF DECOM: add system to decommission tracking google sheet
  • - IF DECOM: mgmt dns entries removed.
  • - IF RECLAIM: system added back to spares tracking (by onsite)

This task will track the decommission-hardware of server etcd1005.eqiad.wmnet

The first 5 steps should be completed by the service owner that is returning the server to DC-ops (for reclaim to spare or decommissioning, dependent on server configuration and age.)

etcd1005.eqiad.wmnet

Steps for service owner:

  • - all system services confirmed offline from production use
  • - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place.
  • - remove system from all lvs/pybal active configuration
  • - any service group puppet/hiera/dsh config removed
  • - remove site.pp, replace with role(spare::system)
  • - unassign service owner from this task, check off completed steps, and assign to @RobH for followup on below steps.

Steps for DC-Ops:

The following steps cannot be interrupted, as it will leave the system in an unfinished state.

Start non-interrupt steps:

  • - disable puppet on host
  • - power down host
  • - update netbox status to Inventory (if decom) or Planned (if spare)
  • - disable switch port
  • - switch port assignment noted on this task (for later removal)
  • - remove all remaining puppet references (include role::spare)
  • - remove production dns entries
  • - puppet node clean, puppet node deactivate (handled by wmf-decommission-host)
  • - remove dbmonitor entries on neodymium/sarin: sudo curl -X DELETE https://debmonitor.discovery.wmnet/hosts/${HOST_FQDN} --cert /etc/debmonitor/ssl/cert.pem --key /etc/debmonitor/ssl/server.key (handled by wmf-decommission-host)

End non-interrupt steps.

  • - system disks wiped (by onsite)
  • - IF DECOM: system unracked and decommissioned (by onsite), update racktables with result
  • - IF DECOM: switch port configration removed from switch once system is unracked.
  • - IF DECOM: add system to decommission tracking google sheet
  • - IF DECOM: mgmt dns entries removed.
  • - IF RECLAIM: system added back to spares tracking (by onsite)

This task will track the decommission-hardware of server etcd1005.eqiad.wmnet

The first 5 steps should be completed by the service owner that is returning the server to DC-ops (for reclaim to spare or decommissioning, dependent on server configuration and age.)

etcd1006.eqiad.wmnet

Steps for service owner:

  • - all system services confirmed offline from production use
  • - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place.
  • - remove system from all lvs/pybal active configuration
  • - any service group puppet/hiera/dsh config removed
  • - remove site.pp, replace with role(spare::system)
  • - unassign service owner from this task, check off completed steps, and assign to @RobH for followup on below steps.

Steps for DC-Ops:

The following steps cannot be interrupted, as it will leave the system in an unfinished state.

Start non-interrupt steps:

  • - disable puppet on host
  • - power down host
  • - update netbox status to Inventory (if decom) or Planned (if spare)
  • - disable switch port
  • - switch port assignment noted on this task (for later removal)
  • - remove all remaining puppet references (include role::spare)
  • - remove production dns entries
  • - puppet node clean, puppet node deactivate (handled by wmf-decommission-host)
  • - remove dbmonitor entries on neodymium/sarin: sudo curl -X DELETE https://debmonitor.discovery.wmnet/hosts/${HOST_FQDN} --cert /etc/debmonitor/ssl/cert.pem --key /etc/debmonitor/ssl/server.key (handled by wmf-decommission-host)

End non-interrupt steps.

  • - system disks wiped (by onsite)
  • - IF DECOM: system unracked and decommissioned (by onsite), update racktables with result
  • - IF DECOM: switch port configration removed from switch once system is unracked.
  • - IF DECOM: add system to decommission tracking google sheet
  • - IF DECOM: mgmt dns entries removed.
  • - IF RECLAIM: system added back to spares tracking (by onsite)

Event Timeline

Joe triaged this task as High priority.Jun 21 2019, 10:15 AM
Joe added subscribers: akosiaris, Joe.

@akosiaris didn't we just dismiss this cluster last week?

akosiaris claimed this task.

@akosiaris didn't we just dismiss this cluster last week?

More like yesterday, T239835#5808708 and friends. I did resolve T224577 but this task eluded me. Resolving, the hosts are no longer around.