Page MenuHomePhabricator

relocate/reimage cloudvirt1015 with 10G interfaces
Closed, ResolvedPublic

Description

Please note this checklist includes re-building the raid.

This host is currently empty and getting a new CPU (T215012) so this is a good time to do our other updates.

  • - put system offline in all checks for maint window
  • - relocate to 10G rack and update netbox
  • - update switch configuration for new primary 10G
  • - enable PXE for 10G primary interface.
  • - attach/cable secondary 10G port for instance traffic, update switch config.
  • - remove old switch config for 1G ports
  • - hand back to @Andrew
  • - setup raid to allow for spare disks
  • - PXE boot and reimage system
  • - reintroduce system into service cluster

Event Timeline

Steps:

  • Move host to a rack with 10G -- B2, B4 or B7 I believe
  • Enable the 10G nic in the bios
  • Move/install cables
  • Update switch config
  • Re-image

Script wmf-auto-reimage was launched by gtirloni on cumin1001.eqiad.wmnet for hosts:

cloudvirt1015.eqiad.wmnet

The log can be found in /var/log/wmf-auto-reimage/201902281728_gtirloni_234720_cloudvirt1015_eqiad_wmnet.log.

Completed auto-reimage of hosts:

['cloudvirt1015.eqiad.wmnet']

and were ALL successful.

jbond triaged this task as Medium priority.Mar 4 2019, 7:54 PM

This server is already in a 10G rack, I went to try and connect it today and while there is a 10G network card, I could figure out how to enable it. Can someone else please look and let me know.

RobH updated the task description. (Show Details)
RobH renamed this task from cloudvirt1015: update raid config and move to 10Gb to relocate/reimage cloudvirt1015 with 10G interfaces.Apr 4 2019, 6:32 PM
RobH updated the task description. (Show Details)
Cmjohnson updated the task description. (Show Details)

This server should be ready to go

I reimaged and built a canary VM and everything looks good. Will put into proper service soon.