Page MenuHomePhabricator

relocate/reimage cloudvirt1018 with 10G interfaces
Closed, ResolvedPublic

Description

This needs to stay in the same row, but needs moving to a rack with a 10g switch.

cloudvirt1018 migration to 10G:

  • - put system offline in all checks for maint window
  • - relocate to 10G rack and update netbox
  • - enable PXE for 10G interfaces.
  • - update switch configuration for new primary 10G and secondary 10G ports (remove old switch port information)
  • - PXE boot and reimage system
  • - reintroduce system into service cluster

Event Timeline

Steps:

  • Move host to a rack with 10G -- B2, B4 or B7 I believe
  • Enable the 10G nic in the bios
  • Move/install cables
  • Update switch config
  • Re-image
jbond triaged this task as Medium priority.Mar 4 2019, 7:48 PM
RobH renamed this task from Move cloudvirt1018 to a 10G rack, connect 10G nics to relocate and reimage cloudvirt1018 with 10G interfaces.Apr 4 2019, 5:43 PM
RobH renamed this task from relocate and reimage cloudvirt1018 with 10G interfaces to relocate/reimage cloudvirt1008 with 10G interfaces.
RobH updated the task description. (Show Details)
RobH updated the task description. (Show Details)
RobH renamed this task from relocate/reimage cloudvirt1008 with 10G interfaces to relocate/reimage cloudvirt1018 with 10G interfaces.Apr 4 2019, 5:45 PM
RobH updated the task description. (Show Details)

Everything is done with this server but I am not getting any link lights on the 10G card. I verified and re-verified that the card is enabled and set to PXE. Only the 10G cards are showing which means it's enabled. The switch configuration looks good but this needs to be looked at by someone. I am not sure what's going on. The only thing that can be done right now is a F/W update. I will do that next

@RobH or @andrewbogott I don't know if a change was made but I see link lights on both ports for cloudvirt1018

Andrew claimed this task.