https://blocksandfiles.com/2019/11/25/hpe-issues-firmware-fix-to-to-stop-ssd-failure/
HPE has issued a firmware fix to stop certain SAS SSDs crashing at 32,768 hours of operation.
Affected HPE systems include ProLiant servers, Synergy, Apollo, JBOD D3xxx, D6xxx, D8xxx, MSA and StoreVirtual 3200 arrays. 3PAR, Nimble and Primera arrays are not affected. The affected drives’ firmware should be updated immediately.
A series of HPE SSD SKUs are listed in HPE’s bulletin. These are all 2.5-inch, 12Gbit/s SAS SSDs with capacities of 400GB, 800GB, 1.6TB and 3.2TB. A second set of capacities are 480GB, 960GB, 1.92TB, 3.84TB, 7.68TB and 15.3TB.
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00092491en_us
I've no idea if this affects any of our hardware, but better to be safe than sorry