Telxius transport needs to have its eqiad side patch in to cr1-eqiad:xe-3/1/4.
The cross-connect order was placed on task T293617. It will terminate into ports 31/32 on our patch panel in the DMARC 0000 cabinet. Please ensure a fiber is run for this (there may already be one in place.)
I don't expect light on this until we have a turn up call with Telxius and send light from drmrs.
setup checklist
- - fiber in place from dmarc to cr1
- - fiber plugged into cr1-eqiad:xe-3/1/4.
- - fiber plugged into PP:0000:103234:X31/32
- - netbox cable id updated and status set to active
- - no light seen either direction as of 2021-10-22 when John attached patch
- - chris rolled fiber on 2021-10-25, no light and vendor confirms they are sending
- - troubleshoot this link by directly attaching a known good fiber patch (typically a short 1m run) to the port directly and measure for light (this rules out the 15m lc-sc patch), record results and test both ports
- - if still no light at panel, via meter on both ports of PP:0000:103234:X31/32, then assign this to Rob and he'll open a troubleshooting ticket with DC6 staff.
- - 1-213238087671 ticket opened for troubleshooting, do not check this box until troubleshooting has concluded on that ticket.
- - link online