Creating this task to track progress in installing the OpenGear console server into the new cage in Eqiad.

Wikitech detail on this process is here for reference:

https://wikitech.wikimedia.org/wiki/SRE/Dc-operations/Platform-specific_documentation/Opengear_Serial_Consoles#Initial_Setup

scs-f8-eqiad has been installed and is reachable on the management network. Steps from the above instructions have been completed to the listed stage of "All basic networking and login should now be set." Remaining steps are as follows:

• - Add device to monitoring
• - Port / Connection Setup

On that last point the serial ports are all labelled, however not all appear to be functioning. Specifically none of the Juniper switches are reachable, but all of the PSUs are:

Switches

PSUs

I played with the serial port settings, speed etc. on some of the ports connecting switches but there are no signs of life. @Jclark-ctr can you confirm the current status of the connections from the OpenGear to the QFX switch CON ports? Thanks.