This task will track the racking, setup, and OS installation of ganeti203[12]
Hostname / Racking / Installation Details
Hostnames: ganeti2031.codfw.wmnet, ganeti2032.codwf.wmnet
Racking Proposal: Please add these two in row B in two different racks different from B8 and B5 (if possible).
Networking Setup: 10G, same VLAN/IP setup as existing Ganeti servers
Partitioning/Raid: partman/custom/ganeti-raid5.cfg
OS Distro: Bullseye
Sub-team Technical Contact: Moritz (or if unavailable, IF)
Per host setup checklist
Each host should have its own setup checklist copied and pasted into the list below.
ganeti2031.codfw.wmnet: B4/U16 xe-4/0/15
- - receive in system on procurement task T311753 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - Enable "Virtualization technology" under "System BIOS" -> "Processor Settings"
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
ganeti2032.codfw.wmnet: B7U6 xe-7/0/5
- - receive in system on procurement task T311753 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - Enable "Virtualization technology" under "System BIOS" -> "Processor Settings"
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.