This task will track the racking, setup, and OS installation of 16 new cp hosts to replace the hosts in ulsfo.
Please note half of these have dual 6.4TB NVMe SSDs and half only have a single 6.4TB NVMe SSD.
Hostname / Racking / Installation Details
Hostnames: cp4037 and upwards
Racking Proposal: Odd hostnames in rack 22, even hostnames in rack 23.
Networking Setup: # of Connections:1, Speed:10G. Vlan:Private AAAA records:Y
Partitioning/Raid:
OS Distro: Bullseye
Sub-team Technical Contact: @BBlack
CP Nodes' mapping for replacements and where NVMEs go:
cp nodes Current Replacement Disks text 21-26, 33, 34 37-44 Single NVME upload 27-32, 35, 36 45-52 Dual NVME
Firmware Notes
These shipped with the following firmwares:
bios is newest 1.6.5 - no change needed
10G nic is 22.00.07.60 , - must downgrade to 21.85.21.92 or PXE fails
idrac is 5.10.30.00, cap at this and won't upgrade to 6.x which breaks https mgmt access - no change needed
Link to correct firmware: https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=rxp80&oscode=naa&productcode=poweredge-r450
Per host setup checklist
cp4037:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - had to steal the optic for xconnection to sv1, dac cable wrong type, production network not attached yet. - fully cabled netbox updated
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller) - downgraded nic to 21.85.21.92
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4038:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4039:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4040:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4041:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4042:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4043:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4044:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4045:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit has to run homer not new sre.network.configure-switch-interfaces
- - bios/drac/serial setup/testing,- auto provision fails on new hosts, had to set manually
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4046:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4047:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4048:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4049:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4050:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4051:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
cp4052:
- - receive in system on procurement task T311861/T3118622 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.