This task will track the racking, setup, and OS installation of snapshot101[67]
Hostname / Racking / Installation Details
Hostnames: snapshot1016, 1017 will be the new names, following the standard naming convention for these boxes.
Racking Proposal: Please put these in rows with fewer existing snapshot hosts (except 1008/9 which are to be replaed by these). Additionally, please put in racks without snapshot boxes in them already, if possible.
Networking Setup: 1G Nic, private vlan, just like the previous snapshot hosts please.
Partitioning/Raid: As with the previous boxes, software raid 1 of the two 480GB SSDs, using the same partman recipe combo: partman/standard.cfg partman/raid1-2dev.cfg
OS Distro: We're not yet on bullseye with our other hosts, so let's do buster; if we get the upgrade done before these hosts are ready for the base install, the task will get updated.
Sub-team Technical Contact: @ArielGlenn will be your contact for this time around. Thank you for choosing ATG services.
Per host setup checklist
snapshot1016:
- - receive in system on procurement task T333363 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
snapshot1017:
- - receive in system on procurement task T333363 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.