Page MenuHomePhabricator

Q1:rack/setup/install frban1002
Closed, ResolvedPublic

Description

This task will track the racking, setup, and OS installation of frban1002

Hostname / Racking / Installation Details

Hostnames: frban1002
Racking Proposal: eqiad frack
Networking Setup: one interface connected to each frack switch for port bonding

  • all servers: 2x10G interfaces
  • frban1002: ports assigned to frack-fundraising VLAN

Partitioning/Raid: fr-tech-ops will handle RAID setup
OS Distro: fr-tech-ops will handle OS setup
Sub-team Technical Contact: Jeff Green / Dallas Wisehaupt

Per host setup checklist

Each host should have its own setup checklist copied and pasted into the list below.

frban1002 U36 xe-0/0/41
  • Receive in system on procurement task T369750 & in Coupa
  • Rack system with proposed racking plan (see above) & update Netbox (include all system info plus location, state of planned)
  • Run the Provision a server's network attributes Netbox script - Note that you must run the DNS and Provision cookbook after completing this step
  • Immediately run the sre.dns.netbox cookbook
  • Immediately run the sre.hosts.provision cookbook
  • Run the sre.hardware.upgrade-firmware cookbook
  • Hand off to FR-Tech for setup

Event Timeline

RobH mentioned this in Unknown Object (Task).
RobH added a parent task: Unknown Object (Task).
RobH moved this task from Backlog to Racking Tasks on the ops-eqiad board.
RobH added subscribers: Jgreen, Dwisehaupt.
RobH unsubscribed.

@Dwisehaupt,

The fundraising hosts follow a different workflow than normal hosts, in that we typically don't reimage them and hand them off to your team. I'd like to update these task checklists to accurate reflect what your team needs from us. My understanding is we'll do all the steps up to but not including 'Update the operations/puppet repo' step, and instead hand it off to you for reimage at that time. Is that correct?

Please advise via comment and unassign yourself as task assignee so on-sites will process according to your update once systems arrive onsite.

Dwisehaupt updated the task description. (Show Details)
Dwisehaupt added a subscriber: RobH.

@RobH Correct. That is our assumption. Once the host is racked, cabled, and all the basic provisioning of the hardware is complete then it can be transferred to us for install and configuration. I have updated the checklist for this task.

Can we get verification on the status of this host? Are they racked, cabled, and ready for build out?

Papaul updated the task description. (Show Details)
Papaul subscribed.

@Jgreen all your's

Jgreen removed Jgreen as the assignee of this task.Apr 8 2025, 2:57 PM
Dwisehaupt claimed this task.
Dwisehaupt updated the task description. (Show Details)
Dwisehaupt moved this task from Backlog to Done on the fundraising-tech-ops board.

Verifying this is complete and the host is up and running.