Page MenuHomePhabricator
Create Task
Maniphest T93272

subra/wmf5816 - relabel system / setup mgmt / update racktables
Closed, ResolvedPublic
Actions

Description

@Papaul,

We'll be placing system wmf5816 back in to service, and renaming it from its old Tampa name. The system was named mexia, the new name is subra.

Please do the following:

  • - apply new name label (subra) to front and back of system
  • - update the visible label field in racktables from tola to subra once labels have been replaced
  • - confirm/correct all bios/redirection settings
  • - update mgmt network, ip: 10.193.2.163
  • - test login/redirection/powercycle via mgmt
  • - update this task with the network port that this system is plugged into
  • - resolve task when complete

Related Objects
Search...

Event Timeline

RobH created this task.Mar 19 2015, 9:45 PM
RobH assigned this task to Papaul.
RobH raised the priority of this task from to Medium.
RobH updated the task description. (Show Details)
RobH added projects: acl*sre-team, ops-codfw.
RobH added subscribers: Aklapper, Dzahn, RobH, Papaul.
RobH mentioned this in T93261: Setup poolcounter servers for codfw.Mar 19 2015, 10:16 PM
Papaul closed this task as Resolved.Mar 20 2015, 4:29 PM

Rack table update
physical label in place
mgmt. and Bios settings complete
Test complete

subra 10.193.2.163 ge-5/0/11 B5

Dzahn reopened this task as Open.Mar 20 2015, 6:07 PM

could you check the cable? i'm getting

PXE-E61: Media test failure, check cable
PXE-M0F: Exiting Broadcom PXE ROM.

No boot device available.

when trying to install the OS

RobH closed this task as Resolved.Mar 20 2015, 6:29 PM

This may be due to the network port not being setup yet per parent task T93261. I'll set that up now, so resolving this task. (If it still fails with this after setup, then this should re-open.)

Dzahn reopened this task as Open.Mar 24 2015, 6:07 PM

the OS installer fails to detect any disks here when it does hardware detection, unlike with suhail where it worked normal. could you check if the hardware is actually there and/or BIOS settings?

Dzahn reassigned this task from Papaul to RobH.Mar 24 2015, 6:08 PM
Dzahn raised the priority of this task from Medium to High.
RobH closed this task as Resolved.Mar 24 2015, 6:36 PM

So this is an older system with H310 raid controller (not really raid, just crappy controller). So I've set them to non raid disks and rebooted into the installer.

Dzahn added a comment.Mar 24 2015, 8:10 PM

the installer now detects disks and formats them. after being done it keeps PXE booting though, so it's a cycle of reinstalling and rebooting.

i went to BIOS and changed the boot order which was set to try the NIC first and set it to use the first HD but that didn't make it boot from it either

Content licensed under Creative Commons Attribution-ShareAlike (CC BY-SA) 4.0 unless otherwise noted; code licensed under GNU General Public License (GPL) 2.0 or later and other open source licenses. By using this site, you agree to the Terms of Use, Privacy Policy, and Code of Conduct. · Wikimedia Foundation · Privacy Policy · Code of Conduct · Terms of Use · Disclaimer · CC-BY-SA · GPL