Change Details

This task will track the racking, setup, and OS installation of cloudcephosd10[16-20].eqiad.wmnet == Hostname / Racking / Installation Details == **Hostnames:** cloudcephosd10[16-20].eqiad.wmnet **Racking Proposal:** Row B/D, 10G racks, ideally 4 OSD per rack for optimal spread of cluster against PDU & switch failures **Networking/Subnet/VLAN/IP:** 2 x 10G ports per server (5 x 2 = 10 ports). Each host should have its primary nic on cloud-hosts1-eqiad and its secondary on cloud-storage1-eqiad. **Partitioning/Raid:** RAID 10 on OS drive pair, no RAID (JBOD Only) for data drives. **OS Distro:** Buster == Per host setup checklist == Each host should have its own setup checklist copied and pasted into the list below. cloudcephosd1016: [X] - receive in system on #procurement task T271239 & in coupa [X] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged cloudcephosd1017: [X] - receive in system on #procurement task T271239 & in coupa [X] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged cloudcephosd1018: [X] - receive in system on #procurement task T271239 & in coupa [X] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit [x] - NO NETWORK LINK, PLEASE CHECK CABLE AND SEE COMMENT T274945#7010007 - had network link just wrong port pxe flagged ** end on-site specific steps [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged cloudcephosd1019: [X] - receive in system on #procurement task T271239 & in coupa [] - move into C8 or D5 or row B. try to differ from other hosts on this task, row b least preferred. [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname), run cookbook sre.dns.netbox. [] - add production dns entries in netbox, run cookbook sre.dns.netbox. [] - network port setup via netbox, run homer to commit ** end on-site specific steps [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged cloudcephosd1020: [X] - receive in system on #procurement task T271239 & in coupa [] - move into C8 or D5 or row B. try to differ from other hosts on this task, row b least preferred. [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname), run cookbook sre.dns.netbox. [] - add production dns entries in netbox, run cookbook sre.dns.netbox. [] - network port setup via netbox, run homer to commit ** end on-site specific steps [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged **Once the system(s) above have had all checkbox steps completed, this task can be resolved.**

This task will track the racking, setup, and OS installation of cloudcephosd10[16-20].eqiad.wmnet == Hostname / Racking / Installation Details == **Hostnames:** cloudcephosd10[16-20].eqiad.wmnet **Racking Proposal:** must go into cloudracks (c8, d5) **Networking/Subnet/VLAN/IP:** 2 x 10G ports per server (5 x 2 = 10 ports). Each host should have its 1:10G on cloud-hosts1-eqiad and its 2:10G on cloud-storage1-eqiad. **Partitioning/Raid:** RAID 10 on OS drive pair, no RAID (JBOD Only) for data drives. **OS Distro:** Buster == Per host setup checklist == Each host should have its own setup checklist copied and pasted into the list below. cloudcephosd1016: [X] - receive in system on #procurement task T271239 & in coupa [] - move system from existing rack to WMCS rack(s) C8 or D5 (evenly split these 5 hosts between those two racks.) [] - list all of the new network port DAC cable IDs and port information. [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [] - network port setup via netbox, run homer to commit [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged cloudcephosd1017: [X] - receive in system on #procurement task T271239 & in coupa [] - move system from existing rack to WMCS rack(s) C8 or D5 (evenly split these 5 hosts between those two racks.) [] - list all of the new network port DAC cable IDs and port information. [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [] - network port setup via netbox, run homer to commit [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged cloudcephosd1018: [X] - receive in system on #procurement task T271239 & in coupa [] - move system from existing rack to WMCS rack(s) C8 or D5 (evenly split these 5 hosts between those two racks.) [] - list all of the new network port DAC cable IDs and port information. [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [] - network port setup via netbox, run homer to commit [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged cloudcephosd1019: [X] - receive in system on #procurement task T271239 & in coupa [] - move system from existing rack to WMCS rack(s) C8 or D5 (evenly split these 5 hosts between those two racks.) [] - list all of the new network port DAC cable IDs and port information. [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [] - network port setup via netbox, run homer to commit [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged cloudcephosd1020: [X] - receive in system on #procurement task T271239 & in coupa [] - move system from existing rack to WMCS rack(s) C8 or D5 (evenly split these 5 hosts between those two racks.) [] - list all of the new network port DAC cable IDs and port information. [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [] - network port setup via netbox, run homer to commit [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged **Once the system(s) above have had all checkbox steps completed, this task can be resolved.**

This task will track the racking, setup, and OS installation of cloudcephosd10[16-20].eqiad.wmnet == Hostname / Racking / Installation Details == **Hostnames:** cloudcephosd10[16-20].eqiad.wmnet **Racking Proposal:** Row B/D, 10G must go into cloudracks (c8, ideally 4 OSD per rack for optimal spread of cluster against PDU & switch failuresd5) **Networking/Subnet/VLAN/IP:** 2 x 10G ports per server (5 x 2 = 10 ports). Each host should have its primary nic1:10G on cloud-hosts1-eqiad and its secondary2:10G on cloud-storage1-eqiad. **Partitioning/Raid:** RAID 10 on OS drive pair, no RAID (JBOD Only) for data drives. **OS Distro:** Buster == Per host setup checklist == Each host should have its own setup checklist copied and pasted into the list below. cloudcephosd1016: [X] - receive in system on #procurement task T271239 & in coupa [X] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)] - move system from existing rack to WMCS rack(s) C8 or D5 (evenly split these 5 hosts between those two racks.) [] - list all of the new network port DAC cable IDs and port information. [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged cloudcephosd1017: [X] - receive in system on #procurement task T271239 & in coupa [X] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)] - move system from existing rack to WMCS rack(s) C8 or D5 (evenly split these 5 hosts between those two racks.) [] - list all of the new network port DAC cable IDs and port information. [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged cloudcephosd1018: [X] - receive in system on #procurement task T271239 & in coupa [X] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)] - move system from existing rack to WMCS rack(s) C8 or D5 (evenly split these 5 hosts between those two racks.) [] - list all of the new network port DAC cable IDs and port information. [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit [x] - NO NETWORK LINK, PLEASE CHECK CABLE AND SEE COMMENT T274945#7010007 - had network link just wrong port pxe flagged ** end on-site specific steps [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged cloudcephosd1019: [X] - receive in system on #procurement task T271239 & in coupa [] - move into C8 or D5 or row B. try to differ from other hosts on this task, row b least preferred.system from existing rack to WMCS rack(s) C8 or D5 (evenly split these 5 hosts between those two racks.) [x] - bios/drac/serial setup/testinglist all of the new network port DAC cable IDs and port information. [x] - add mgmt dns (asset tag and hostname), run cookbook sre.dns.netbox.bios/drac/serial setup/testing [] - addx] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [] - network port setup via netbox, run homer to commit ** end on-site specific steps [[x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged cloudcephosd1020: [X] - receive in system on #procurement task T271239 & in coupa [] - move into C8 or D5 or row B. try to differ from other hosts on this task, row b least preferred.system from existing rack to WMCS rack(s) C8 or D5 (evenly split these 5 hosts between those two racks.) [x] - bios/drac/serial setup/testinglist all of the new network port DAC cable IDs and port information. [x] - add mgmt dns (asset tag and hostname), run cookbook sre.dns.netbox.bios/drac/serial setup/testing [] - addx] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [] - network port setup via netbox, run homer to commit ** end on-site specific steps [[x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged **Once the system(s) above have had all checkbox steps completed, this task can be resolved.**