Change Details

labcontrol1001: [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp (replace with role::spare if system isn't shut down immediately during this process.) Steps for DC-Ops: The following steps cannot be interrupted, as it will leave the system in an unfinished state. **Start non-interrupt steps:** [] - disable puppet on host [] - power down host [] - update netbox status to Inventory (if decom) or Planned (if spare) [] - disable switch port [] - switch port assignment noted on this task (for later removal) [] - remove all remaining puppet references (include role::spare) [] - remove production dns entries [] - puppet node clean, puppet node deactivate (handled by wmf-decommission-host) [] - remove dbmonitor entries on neodymium/sarin: sudo curl -X DELETE https://debmonitor.discovery.wmnet/hosts/${HOST_FQDN} --cert /etc/debmonitor/ssl/cert.pem --key /etc/debmonitor/ssl/server.key (handled by wmf-decommission-host) **End non-interrupt steps.** [] - system disks wiped (by onsite) [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result [] - IF DECOM: switch port configration removed from switch once system is unracked. [] - IF DECOM: add system to decommission tracking google sheet [] - IF DECOM: mgmt dns entries removed. labcontrol1002: [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp (replace with role::spare if system isn't shut down immediately during this process.) Steps for DC-Ops: The following steps cannot be interrupted, as it will leave the system in an unfinished state. **Start non-interrupt steps:** [] - disable puppet on host [] - power down host [] - update netbox status to Inventory (if decom) or Planned (if spare) [] - disable switch port [] - switch port assignment noted on this task (for later removal) [] - remove all remaining puppet references (include role::spare) [] - remove production dns entries [] - puppet node clean, puppet node deactivate (handled by wmf-decommission-host) [] - remove dbmonitor entries on neodymium/sarin: sudo curl -X DELETE https://debmonitor.discovery.wmnet/hosts/${HOST_FQDN} --cert /etc/debmonitor/ssl/cert.pem --key /etc/debmonitor/ssl/server.key (handled by wmf-decommission-host) **End non-interrupt steps.** [] - system disks wiped (by onsite) [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result [] - IF DECOM: switch port configration removed from switch once system is unracked. [] - IF DECOM: add system to decommission tracking google sheet [] - IF DECOM: mgmt dns entries removed.

labcontrol1001: [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp (replace with role::spare if system isn't shut down immediately during this process.) Steps for DC-Ops: The following steps cannot be interrupted, as it will leave the system in an unfinished state. **Start non-interrupt steps:** [x] - disable puppet on host [x] - power down host [x] - update netbox status to Inventory (if decom) or Planned (if spare) [x] - disable switch port [x] - switch port assignment noted on this task (for later removal) [] - remove all remaining puppet references (include role::spare) [] - remove production dns entries [x] - puppet node clean, puppet node deactivate (handled by wmf-decommission-host) [x] - remove dbmonitor entries on neodymium/sarin: sudo curl -X DELETE https://debmonitor.discovery.wmnet/hosts/${HOST_FQDN} --cert /etc/debmonitor/ssl/cert.pem --key /etc/debmonitor/ssl/server.key (handled by wmf-decommission-host) **End non-interrupt steps.** [] - system disks wiped (by onsite) [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result [] - IF DECOM: switch port configration removed from switch once system is unracked. [] - IF DECOM: add system to decommission tracking google sheet [] - IF DECOM: mgmt dns entries removed. labcontrol1002: [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp (replace with role::spare if system isn't shut down immediately during this process.) Steps for DC-Ops: The following steps cannot be interrupted, as it will leave the system in an unfinished state. **Start non-interrupt steps:** [x] - disable puppet on host [x] - power down host [x] - update netbox status to Inventory (if decom) or Planned (if spare) [x] - disable switch port [x] - switch port assignment noted on this task (for later removal) [] - remove all remaining puppet references (include role::spare) [] - remove production dns entries [x] - puppet node clean, puppet node deactivate (handled by wmf-decommission-host) [x] - remove dbmonitor entries on neodymium/sarin: sudo curl -X DELETE https://debmonitor.discovery.wmnet/hosts/${HOST_FQDN} --cert /etc/debmonitor/ssl/cert.pem --key /etc/debmonitor/ssl/server.key (handled by wmf-decommission-host) **End non-interrupt steps.** [] - system disks wiped (by onsite) [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result [] - IF DECOM: switch port configration removed from switch once system is unracked. [] - IF DECOM: add system to decommission tracking google sheet [] - IF DECOM: mgmt dns entries removed.