This task tracks racking and seutp of snapshot1010.eqiad.wmnet.
**Racking Proposal:** Any 1G rack except where existing snapshot hosts are. Avoid A4, B1, C4, D1, D4.
**Networking/Subnet/VLAN/IP:** These are 1G boxes and don't need more than that. Internal vlan please, it is not a public-facing server.
**Partitioning/Raid:** Partman recipe: the newer hosts use partman/raid1-lvm-ext4-srv-noswap.cfg so if the disk layout and hw supports it, please do that.
snapshot1010.eqiad.wmnet:
[x] - receive in system on #procurement task T233639
[] - rack system with proposed racking plan (see above, any 1G rack EXCEPT A4, B1, C4, D1, D4) & update netbox (include all system info plus location, state of planned)
[] - bios/drac/serial setup/testing
[] - mgmt dns entries added for both asset tag and hostname
[] - network port setup (description, enable, vlan)
** end on-site specific steps
[] - production dns entries added
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation
[] - puppet accept/initial run (with role:spare)
[] - host state in netbox set to staged
[] - handoff for service implementation
[] - service implementer changes from 'staged' status to 'active' status in netbox'