This task will track the #decommission of servers restbase200[1-6] (
The first 5 steps should be completed by the service owner that is returning the server to DC-ops (for reclaim to spare or decommissioning, dependent on server configuration and age.)
Please note these systems are being replaced by T209615. Once the new systems restbase201[3-8].codfw.wmnet are in service, this should immediately proceed, as these are due back for lease return.
**restbase2001:**
Steps for service owner:
[x] - all system services confirmed offline from production use
[x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place.
[x] - remove system from all lvs/pybal active configuration
[x] - any service group puppet/hiera/dsh config removed
[x] - remove site.pp, replace with role(spare::system)
[x] - unassign service owner from this task, check off completed steps, and assign to @robh for followup on below steps.
Steps for DC-Ops:
The following steps cannot be interrupted, as it will leave the system in an unfinished state.
**Start non-interrupt steps:**
[x] - disable puppet on host
[x] - power down host
[x] - update netbox status to Inventory (if decom) or Planned (if spare)
[x] - disable switch port
[x] - switch port assignment noted on this task (for later removal)
[x] - remove all remaining puppet references (include role::spare)
[] - remove production dns entries
[x] - puppet node clean, puppet node deactivate (handled by wmf-decommission-host)
[x] - remove dbmonitor entries on neodymium/sarin: sudo curl -X DELETE https://debmonitor.discovery.wmnet/hosts/${HOST_FQDN} --cert /etc/debmonitor/ssl/cert.pem --key /etc/debmonitor/ssl/server.key (handled by wmf-decommission-host)
**End non-interrupt steps.**
[x] - system disks wiped (by onsite)
[x] - system unracked and decommissioned (by onsite), update netbox with result
[x] - switch port configration removed from switch once system is unracked.
[] - add system to decommission tracking google sheet for LEASE RETURNS
[] - mgmt dns entries removed.
**restbase2002:**
Steps for service owner:
[x] - all system services confirmed offline from production use
[x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place.
[x] - remove system from all lvs/pybal active configuration
[x] - any service group puppet/hiera/dsh config removed
[x] - remove site.pp, replace with role(spare::system)
[x] - unassign service owner from this task, check off completed steps, and assign to @robh for followup on below steps.
Steps for DC-Ops:
The following steps cannot be interrupted, as it will leave the system in an unfinished state.
**Start non-interrupt steps:**
[x] - disable puppet on host
[x] - power down host
[x] - update netbox status to Inventory (if decom) or Planned (if spare)
[x] - disable switch port
[x] - switch port assignment noted on this task (for later removal)
[x] - remove all remaining puppet references (include role::spare)
[x] - remove production dns entries
[x] - puppet node clean, puppet node deactivate (handled by wmf-decommission-host)
[x] - remove dbmonitor entries on neodymium/sarin: sudo curl -X DELETE https://debmonitor.discovery.wmnet/hosts/${HOST_FQDN} --cert /etc/debmonitor/ssl/cert.pem --key /etc/debmonitor/ssl/server.key (handled by wmf-decommission-host)
**End non-interrupt steps.**
[x] - system disks wiped (by onsite)
[x] - system unracked and decommissioned (by onsite), update netbox with result
[x] - switch port configration removed from switch once system is unracked.
[] - add system to decommission tracking google sheet for LEASE RETURNS
[] - mgmt dns entries removed.
**restbase2003:**
Steps for service owner:
[x] - all system services confirmed offline from production use
[x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place.
[x] - remove system from all lvs/pybal active configuration
[x] - any service group puppet/hiera/dsh config removed
[x] - remove site.pp, replace with role(spare::system)
[x] - unassign service owner from this task, check off completed steps, and assign to @robh for followup on below steps.
Steps for DC-Ops:
The following steps cannot be interrupted, as it will leave the system in an unfinished state.
**Start non-interrupt steps:**
[x] - disable puppet on host
[x] - power down host
[x] - update netbox status to Inventory (if decom) or Planned (if spare)
[x] - disable switch port
[x] - switch port assignment noted on this task (for later removal)
[x] - remove all remaining puppet references (include role::spare)
[x] - remove production dns entries
[x] - puppet node clean, puppet node deactivate (handled by wmf-decommission-host)
[x] - remove dbmonitor entries on neodymium/sarin: sudo curl -X DELETE https://debmonitor.discovery.wmnet/hosts/${HOST_FQDN} --cert /etc/debmonitor/ssl/cert.pem --key /etc/debmonitor/ssl/server.key (handled by wmf-decommission-host)
**End non-interrupt steps.**
[x] - system disks wiped (by onsite)
[x] - system unracked and decommissioned (by onsite), update netbox with result
[x] - switch port configration removed from switch once system is unracked.
[] - add system to decommission tracking google sheet for LEASE RETURNS
[] - mgmt dns entries removed.
**restbase2004:**
Steps for service owner:
[x] - all system services confirmed offline from production use
[x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place.
[x] - remove system from all lvs/pybal active configuration
[x] - any service group puppet/hiera/dsh config removed
[x] - remove site.pp, replace with role(spare::system)
[x] - unassign service owner from this task, check off completed steps, and assign to @robh for followup on below steps.
Steps for DC-Ops:
The following steps cannot be interrupted, as it will leave the system in an unfinished state.
**Start non-interrupt steps:**
[x] - disable puppet on host
[x] - power down host
[x] - update netbox status to Inventory (if decom) or Planned (if spare)
[x] - disable switch port
[x] - switch port assignment noted on this task (for later removal)
[x] - remove all remaining puppet references (include role::spare)
[x] - remove production dns entries
[x] - puppet node clean, puppet node deactivate (handled by wmf-decommission-host)
[x] - remove dbmonitor entries on neodymium/sarin: sudo curl -X DELETE https://debmonitor.discovery.wmnet/hosts/${HOST_FQDN} --cert /etc/debmonitor/ssl/cert.pem --key /etc/debmonitor/ssl/server.key (handled by wmf-decommission-host)
**End non-interrupt steps.**
[x] - system disks wiped (by onsite)
[x] - system unracked and decommissioned (by onsite), update netbox with result
[x] - switch port configration removed from switch once system is unracked.
[] - add system to decommission tracking google sheet for LEASE RETURNS
[] - mgmt dns entries removed.
**restbase2005:**
Steps for service owner:
[x] - all system services confirmed offline from production use
[x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place.
[x] - remove system from all lvs/pybal active configuration
[x] - any service group puppet/hiera/dsh config removed
[x] - remove site.pp, replace with role(spare::system)
[x] - unassign service owner from this task, check off completed steps, and assign to @robh for followup on below steps.
Steps for DC-Ops:
The following steps cannot be interrupted, as it will leave the system in an unfinished state.
**Start non-interrupt steps:**
[x] - disable puppet on host
[x] - power down host
[x] - update netbox status to Inventory (if decom) or Planned (if spare)
[x] - disable switch port
[x] - switch port assignment noted on this task (for later removal)
[x] - remove all remaining puppet references (include role::spare)
[x] - remove production dns entries
[x] - puppet node clean, puppet node deactivate (handled by wmf-decommission-host)
[x] - remove dbmonitor entries on neodymium/sarin: sudo curl -X DELETE https://debmonitor.discovery.wmnet/hosts/${HOST_FQDN} --cert /etc/debmonitor/ssl/cert.pem --key /etc/debmonitor/ssl/server.key (handled by wmf-decommission-host)
**End non-interrupt steps.**
[x] - system disks wiped (by onsite)
[x] - system unracked and decommissioned (by onsite), update netbox with result
[x] - switch port configration removed from switch once system is unracked.
[] - add system to decommission tracking google sheet for LEASE RETURNS
[] - mgmt dns entries removed.
**restbase2006:**
Steps for service owner:
[x] - all system services confirmed offline from production use
[x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place.
[x] - remove system from all lvs/pybal active configuration
[x] - any service group puppet/hiera/dsh config removed
[x] - remove site.pp, replace with role(spare::system)
[x] - unassign service owner from this task, check off completed steps, and assign to @robh for followup on below steps.
Steps for DC-Ops:
The following steps cannot be interrupted, as it will leave the system in an unfinished state.
**Start non-interrupt steps:**
[x] - disable puppet on host
[x] - power down host
[x] - update netbox status to Inventory (if decom) or Planned (if spare)
[x] - disable switch port
[x] - switch port assignment noted on this task (for later removal)
[x] - remove all remaining puppet references (include role::spare)
[x] - remove production dns entries
[x] - puppet node clean, puppet node deactivate (handled by wmf-decommission-host)
[x] - remove dbmonitor entries on neodymium/sarin: sudo curl -X DELETE https://debmonitor.discovery.wmnet/hosts/${HOST_FQDN} --cert /etc/debmonitor/ssl/cert.pem --key /etc/debmonitor/ssl/server.key (handled by wmf-decommission-host)
**End non-interrupt steps.**
[x] - system disks wiped (by onsite)
[x] - system unracked and decommissioned (by onsite), update netbox with result
[x] - switch port configration removed from switch once system is unracked.
[] - add system to decommission tracking google sheet for LEASE RETURNS
[] - mgmt dns entries removed.