Change Details

This ticket is to decom bast3001 after it has been replaced by bast3002 in parent task T156506. I say "decom" instead of reclaim because the reason to replace it was broken disk and it's very old. ---- [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp (replace with role::spare if system isn't shut down immediately during this process.) START NON-INTERRUPPTABLE STEPS [x] - disable puppet on host [x] - remove all remaining puppet references (include role::spare) [x] - power down host [x] - disable switch port [x] - switch port assignment noted on this task (for later removal) ge-2/0/4 bast3001/eth0 ge-2/0/5 bast3001/eth1 [x] - remove production dns entries [x] - puppet node clean, puppet node deactivate, salt key removed END NON-INTERRUPPTABLE STEPS [x] close T154603 (as invalid or rejected?) [] - system disks wiped (by onsite) [] - system unracked and decommissioned (by onsite), update racktables with result [] - switch port configration removed from switch once system is unracked..

This ticket is to decom bast3001 after it has been replaced by bast3002 in parent task T156506. I say "decom" instead of reclaim because the reason to replace it was broken disk and it's very old. ---- [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp (replace with role::spare if system isn't shut down immediately during this process.) START NON-INTERRUPPTABLE STEPS [x] - disable puppet on host [x] - remove all remaining puppet references (include role::spare) [x] - power down host [x] - disable switch port [x] - switch port assignment noted on this task (for later removal) ge-2/0/4 bast3001/eth0 ge-2/0/5 bast3001/eth1 [x] - remove production dns entries [x] - puppet node clean, puppet node deactivate, salt key removed END NON-INTERRUPPTABLE STEPS [x] close T154603 (as invalid or rejected?) [x] - system disks wiped (by onsite) [x] - system unracked and decommissioned (by onsite), update racktables with result [x] - switch port configration removed from switch once system is unracked..

This ticket is to decom bast3001 after it has been replaced by bast3002 in parent task T156506. I say "decom" instead of reclaim because the reason to replace it was broken disk and it's very old. ---- [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp (replace with role::spare if system isn't shut down immediately during this process.) START NON-INTERRUPPTABLE STEPS [x] - disable puppet on host [x] - remove all remaining puppet references (include role::spare) [x] - power down host [x] - disable switch port [x] - switch port assignment noted on this task (for later removal) ge-2/0/4 bast3001/eth0 ge-2/0/5 bast3001/eth1 [x] - remove production dns entries [x] - puppet node clean, puppet node deactivate, salt key removed END NON-INTERRUPPTABLE STEPS [x] close T154603 (as invalid or rejected?) [x] - system disks wiped (by onsite) [x] - system unracked and decommissioned (by onsite), update racktables with result [x] - switch port configration removed from switch once system is unracked..