Change Details

= Large Header = == Smaller Header == ## This is a Header As Well Also a Large Header =================== Also a Smaller Header --------------------- > Quoted Text Use `- ` or `* ` for bulleted lists, and `# ` for numbered lists. Use ``` or indent two spaces for code. Use %%% for a literal block. Use | ... | ... for tables. Basic Styling Format basic text styles like this: **bold text** //italic text// `monospaced text` ##monospaced text## ~~deleted text~~ __underlined text__ !!highlighted text!! Those produce bold text, italic text, monospaced text, monospaced text, deleted text, underlined text, and highlighted text respectively. Layout Make headers like this: = Large Header = == Smaller Header == ===== Very Small Header ===== Alternate Large Header ====================== Alternate Smaller Header ------------------------ You can optionally omit the trailing = signs -- that is, these are the same: == Smaller Header == == Smaller Header This produces headers like the ones in this document. Make sure you have an empty line before and after the header. Lists Make lists by beginning each item with a - or a *: - milk - eggs - bread * duck * duck * goose This produces a list like this: milk eggs bread (Note that you need to put a space after the - or *.) You can make numbered lists with a # instead of - or *: Articuno Zapdos Moltres Numbered lists can also be started with 1. or 1). If you use a number other than 1, the list will start at that number instead. For example, this: 200) OK 201) Created 202) Accepted ...produces this: OK Created Accepted You can also nest lists: - Body - Head - Arm - Elbow - Hand # Thumb # Index # Middle # Ring # Pinkie - Leg - Knee - Foot ...which produces: Body Head Arm Elbow Hand Thumb Index Middle Ring Pinkie Leg Knee Foot If you prefer, you can indent lists using multiple characters to show indent depth, like this: - Tree -- Branch --- Twig As expected, this produces: Tree Branch Twig You can add checkboxes to items by prefacing them with [ ] or [X], like this: - [X] Preheat oven to 450 degrees. - [ ] Zest 35 lemons. When rendered, this produces: Preheat oven to 450 degrees. Zest 35 lemons. Make code blocks by indenting two spaces: f(x, y); You can also use three backticks to enclose the code block: f(x, y); g(f); You can specify a language for syntax highlighting with lang=xxx: lang=html <a href="#">...</a> This will highlight the block using a highlighter for that language, if one is available (in most cases, this means you need to configure Pygments): <a href="#">...</a> You can also use a COUNTEREXAMPLE header to show that a block of code is bad and shouldn't be copied: COUNTEREXAMPLE function f() { global $$variable_variable; } This produces a block like this: function f() { global $$variable_variable; } You can use lines=N to limit the vertical size of a chunk of code, and name=some_name.ext to give it a name. For example, this: lang=html, name=example.html, lines=12, counterexample ... ...produces this: example.html Apple Apricot Avocado Banana Bilberry Blackberry Blackcurrant Blueberry Currant Cherry Cherimoya Clementine Date Damson Durian Eggplant Elderberry Feijoa Gooseberry Grape Grapefruit Guava Huckleberry Jackfruit Jambul Kiwi fruit Kumquat Legume Lemon Lime Lychee Mandarine Mango Mangostine Melon You can use the NOTE:, WARNING: or IMPORTANT: elements to call attention to an important idea. For example, write this: NOTE: Best practices in proton pack operation include not crossing the streams. ...to produce this: NOTE: Best practices in proton pack operation include not crossing the streams. Using WARNING: or IMPORTANT: at the beginning of the line changes the color of the callout: WARNING: Crossing the streams can result in total protonic reversal! IMPORTANT: Don't cross the streams! In addition, you can use (NOTE), (WARNING), or (IMPORTANT) to get the same effect but without (NOTE), (WARNING), or (IMPORTANT) appearing in the rendered result. For example, this callout uses (NOTE): Dr. Egon Spengler is the best resource for additional proton pack questions. Dividers You can divide sections by putting three or more dashes on a line by themselves. This creates a divider or horizontal rule similar to an <hr /> tag, like this one: The dashes need to appear on their own line and be separated from other content. For example, like this: This section will be visually separated. --- On an entirely different topic, ... Linking URIs URIs are automatically linked: http://phabricator.org/ If you have a URI with problematic characters in it, like "http://comma.org/,", you can surround it with angle brackets: <http://comma.org/,> This will force the parser to consume the whole URI: http://comma.org/, You can also use create named links, where you choose the displayed text. These work within Phabricator or on the internet at large: [[/herald/transcript/ | Herald Transcripts]] [[http://www.boring-legal-documents.com/ | exciting legal documents]] Markdown-style links are also supported: [Toil](http://www.trouble.com) Linking to Objects You can link to Phabricator objects, such as Differential revisions, Diffusion commits and Maniphest tasks, by mentioning the name of an object: D123 # Link to Differential revision D123 rX123 # Link to SVN commit 123 from the "X" repository rXaf3192cd5 # Link to Git commit "af3192cd5..." from the "X" repository. # You must specify at least 7 characters of the hash. T123 # Link to Maniphest task T123 You can also link directly to a comment in Maniphest and Differential (these can be found on the date stamp of any transaction/comment): T123#412 # Link to comment id #412 of task T123 See the Phabricator configuration setting remarkup.ignored-object-names to modify this behavior. Embedding Objects You can also generate full-name references to some objects by using braces: {D123} # Link to Differential revision D123 with the full name {T123} # Link to Maniphest task T123 with the full name These references will also show when an object changes state (for instance, a task or revision is closed). Some types of objects support rich embedding. Linking to Project Tags Projects can be linked to with the use of a hashtag #. This works by default using the name of the Project (lowercase, underscored). Additionally you can set multiple additional hashtags by editing the Project details. #qa, #quality_assurance Embedding Mocks (Pholio) You can embed a Pholio mock by using braces to refer to it: {M123} By default the first four images from the mock set are displayed. This behavior can be overridden with the image option. With the image option you can provide one or more image IDs to display. You can set the image (or images) to display like this: {M123, image=12345} {M123, image=12345 & 6789} Embedding Pastes You can embed a Paste using braces: {P123} You can adjust the embed height with the lines option: {P123, lines=15} You can highlight specific lines with the highlight option: {P123, highlight=15} {P123, highlight="23-25, 31"} Embedding Images You can embed an image or other file by using braces to refer to it: {F123} In most interfaces, you can drag-and-drop an image from your computer into the text area to upload and reference it. Some browsers (e.g. Chrome) support uploading an image data just by pasting them from clipboard into the text area. You can set file display options like this: {F123, layout=left, float, size=full, alt="a duckling"} Valid options for all files are: layout left (default), center, right, inline, link (render a link instead of a thumbnail for images) name with layout=link or for non-images, use this name for the link text alt Provide alternate text for assistive technologies. Image files support these options: float If layout is set to left or right, the image will be floated so text wraps around it. size thumb (default), full width Scale image to a specific width. height Scale image to a specific height. Audio and video files support these options: media: Specify the media type as audio or video. This allows you to disambiguate how file format which may contain either audio or video should be rendered. loop: Loop this media. autoplay: Automatically begin playing this media. Embedding Countdowns You can embed a countdown by using braces: {C123} Quoting Text To quote text, preface it with an >: > This is quoted text. This appears like this: This is quoted text. Embedding Media If you set a configuration flag, you can embed media directly in text: remarkup.enable-embedded-youtube: allows you to paste in YouTube videos and have them render inline. This option is disabled by default because it has security and/or silliness implications. Carefully read the description before enabling it. Image Macros You can upload image macros (More Stuff -> Macro) which will replace text strings with the image you specify. For instance, you could upload an image of a dancing banana to create a macro named "peanutbutterjellytime", and then any time you type that string on a separate line it will be replaced with the image of a dancing banana. Memes You can also use image macros in the context of memes. For example, if you have an image macro named grumpy, you can create a meme by doing the following: {meme, src = grumpy, above = toptextgoeshere, below = bottomtextgoeshere} By default, the font used to create the text for the meme is tuffy.ttf. For the more authentic feel of impact.ttf, you simply have to place the Impact TrueType font in the Phabricator subfolder /resources/font/. If Remarkup detects the presence of impact.ttf, it will automatically use it. Mentioning Users In Differential and Maniphest, you can mention another user by writing: @username When you submit your comment, this will add them as a CC on the revision or task if they aren't already CC'd. Icons You can add icons to comments using the {icon ...} syntax. For example: {icon camera} This renders: You can select a color for icons: {icon camera color=blue} This renders: For a list of available icons and colors, check the UIExamples application. (The icons are sourced from FontAwesome, so you can also browse the collection there.) You can add spin to make the icon spin: {icon cog spin} This renders: Phriction Documents You can link to Phriction documents with a name or path: Make sure you sign and date your [[legal/Letter of Marque and Reprisal]]! By default, the link will render with the document title as the link name. With a pipe (|), you can retitle the link. Use this to mislead your opponents: Check out these [[legal/boring_documents/ | exciting legal documents]]! Links to pages which do not exist are shown in red. Links to pages which exist but which the viewer does not have permission to see are shown with a lock icon, and the link will not disclose the page title. If you begin a link path with ./ or ../, the remainder of the path will be evaluated relative to the current wiki page. For example, if you are writing content for the document fruit/ a link to [[./guava]] is the same as a link to [[fruit/guava]] from elsewhere. Relative links may use ../ to transverse up the document tree. From the produce/vegetables/ page, you can use [[../fruit/guava]] to link to the produce/fruit/guava page. Relative links do not work when used outside of wiki pages. For example, you can't use a relative link in a comment on a task, because there is no reasonable place for the link to start resolving from. When documents are moved, relative links are not automatically updated: they are preserved as currently written. After moving a document, you may need to review and adjust any relative links it contains. Literal Blocks To place text in a literal block use %%%: Text that won't be processed by remarkup [[http://www.example.com | example]] Remarkup will not process the text inside of literal blocks (other than to escape HTML and preserve line breaks). Tables Remarkup supports simple table syntax. For example, this: | Fruit | Color | Price | Peel? | ----- | ----- | ----- | ----- | Apple | red | `$0.93` | no | Banana | yellow | `$0.19` | **YES** ...produces this: Fruit Color Price Peel? Apple red $0.93 no Banana yellow $0.19 YES Remarkup also supports a simplified HTML table syntax. For example, this: <table> <tr> <th>Fruit</th> <th>Color</th> <th>Price</th> <th>Peel?</th> </tr> <tr> <td>Apple</td> <td>red</td> <td>`$0.93`</td> <td>no</td> </tr> <tr> <td>Banana</td> <td>yellow</td> <td>`$0.19`</td> <td>**YES**</td> </tr> </table> ...produces this: Fruit Color Price Peel? Apple red $0.93 no Banana yellow $0.19 YES Some general notes about this syntax:

.

= Large Header = == Smaller Header == ## This is a Header As Well Also a Large Header =================== Also a Smaller Header --------------------- > Quoted Text Use `- ` or `* ` for bulleted lists, and `# ` for numbered lists. Use ``` or indent two spaces for code. Use %%% for a literal block. Use | ... | ... for tables. Basic Styling Format basic text styles like this: **bold text** //italic text// `monospaced text` ##monospaced text## ~~deleted text~~ __underlined text__ !!highlighted text!! Those produce bold text, italic text, monospaced text, monospaced text, deleted text, underlined text, and highlighted text respectively. Layout Make headers like this: = Large Header = == Smaller Header == ===== Very Small Header ===== Alternate Large Header ====================== Alternate Smaller Header ------------------------ You can optionally omit the trailing = signs -- that is, these are the same: == Smaller Header == == Smaller Header This produces headers like the ones in this document. Make sure you have an empty line before and after the header. Lists Make lists by beginning each item with a - or a *: - milk - eggs - bread * duck * duck * goose This produces a list like this: milk eggs bread (Note that you need to put a space after the - or *.) You can make numbered lists with a # instead of - or *: Articuno Zapdos Moltres Numbered lists can also be started with 1. or 1). If you use a number other than 1, the list will start at that number instead. For example, this: 200) OK 201) Created 202) Accepted ...produces this: OK Created Accepted You can also nest lists: - Body - Head - Arm - Elbow - Hand # Thumb # Index # Middle # Ring # Pinkie - Leg - Knee - Foot ...which produces: Body Head Arm Elbow Hand Thumb Index Middle Ring Pinkie Leg Knee Foot If you prefer, you can indent lists using multiple characters to show indent depth, like this: - Tree -- Branch --- Twig As expected, this produces: Tree Branch Twig You can add checkboxes to items by prefacing them with [ ] or [X], like this: - [X] Preheat oven to 450 degrees. - [ ] Zest 35 lemons. When rendered, this produces: Preheat oven to 450 degrees. Zest 35 lemons. Make code blocks by indenting two spaces: f(x, y); You can also use three backticks to enclose the code block: f(x, y); g(f); You can specify a language for syntax highlighting with lang=xxx: lang=html <a href="#">...</a> This will highlight the block using a highlighter for that language, if one is available (in most cases, this means you need to configure Pygments): <a href="#">...</a> You can also use a COUNTEREXAMPLE header to show that a block of code is bad and shouldn't be copied: COUNTEREXAMPLE function f() { global $$variable_variable; } This produces a block like this: function f() { global $$variable_variable; } You can use lines=N to limit the vertical size of a chunk of code, and name=some_name.ext to give it a name. For example, this: lang=html, name=example.html, lines=12, counterexample ... ...produces this: example.html Apple Apricot Avocado Banana Bilberry Blackberry Blackcurrant Blueberry Currant Cherry Cherimoya Clementine Date Damson Durian Eggplant Elderberry Feijoa Gooseberry Grape Grapefruit Guava Huckleberry Jackfruit Jambul Kiwi fruit Kumquat Legume Lemon Lime Lychee Mandarine Mango Mangostine Melon You can use the NOTE:, WARNING: or IMPORTANT: elements to call attention to an important idea. For example, write this: NOTE: Best practices in proton pack operation include not crossing the streams. ...to produce this: NOTE: Best practices in proton pack operation include not crossing the streams. Using WARNING: or IMPORTANT: at the beginning of the line changes the color of the callout: WARNING: Crossing the streams can result in total protonic reversal! IMPORTANT: Don't cross the streams! In addition, you can use (NOTE), (WARNING), or (IMPORTANT) to get the same effect but without (NOTE), (WARNING), or (IMPORTANT) appearing in the rendered result. For example, this callout uses (NOTE): Dr. Egon Spengler is the best resource for additional proton pack questions. Dividers You can divide sections by putting three or more dashes on a line by themselves. This creates a divider or horizontal rule similar to an <hr /> tag, like this one: The dashes need to appear on their own line and be separated from other content. For example, like this: This section will be visually separated. --- On an entirely different topic, ... Linking URIs URIs are automatically linked: http://phabricator.org/ If you have a URI with problematic characters in it, like "http://comma.org/,", you can surround it with angle brackets: <http://comma.org/,> This will force the parser to consume the whole URI: http://comma.org/, You can also use create named links, where you choose the displayed text. These work within Phabricator or on the internet at large: [[/herald/transcript/ | Herald Transcripts]] [[http://www.boring-legal-documents.com/ | exciting legal documents]] Markdown-style links are also supported: [Toil](http://www.trouble.com) Linking to Objects You can link to Phabricator objects, such as Differential revisions, Diffusion commits and Maniphest tasks, by mentioning the name of an object: D123 # Link to Differential revision D123 rX123 # Link to SVN commit 123 from the "X" repository rXaf3192cd5 # Link to Git commit "af3192cd5..." from the "X" repository. # You must specify at least 7 characters of the hash. T123 # Link to Maniphest task T123 You can also link directly to a comment in Maniphest and Differential (these can be found on the date stamp of any transaction/comment): T123#412 # Link to comment id #412 of task T123 See the Phabricator configuration setting remarkup.ignored-object-names to modify this behavior. Embedding Objects You can also generate full-name references to some objects by using braces: {D123} # Link to Differential revision D123 with the full name {T123} # Link to Maniphest task T123 with the full name These references will also show when an object changes state (for instance, a task or revision is closed). Some types of objects support rich embedding. Linking to Project Tags Projects can be linked to with the use of a hashtag #. This works by default using the name of the Project (lowercase, underscored). Additionally you can set multiple additional hashtags by editing the Project details. #qa, #quality_assurance Embedding Mocks (Pholio) You can embed a Pholio mock by using braces to refer to it: {M123} By default the first four images from the mock set are displayed. This behavior can be overridden with the image option. With the image option you can provide one or more image IDs to display. You can set the image (or images) to display like this: {M123, image=12345} {M123, image=12345 & 6789} Embedding Pastes You can embed a Paste using braces: {P123} You can adjust the embed height with the lines option: {P123, lines=15} You can highlight specific lines with the highlight option: {P123, highlight=15} {P123, highlight="23-25, 31"} Embedding Images You can embed an image or other file by using braces to refer to it: {F123} In most interfaces, you can drag-and-drop an image from your computer into the text area to upload and reference it. Some browsers (e.g. Chrome) support uploading an image data just by pasting them from clipboard into the text area. You can set file display options like this: {F123, layout=left, float, size=full, alt="a duckling"} Valid options for all files are: layout left (default), center, right, inline, link (render a link instead of a thumbnail for images) name with layout=link or for non-images, use this name for the link text alt Provide alternate text for assistive technologies. Image files support these options: float If layout is set to left or right, the image will be floated so text wraps around it. size thumb (default), full width Scale image to a specific width. height Scale image to a specific height. Audio and video files support these options: media: Specify the media type as audio or video. This allows you to disambiguate how file format which may contain either audio or video should be rendered. loop: Loop this media. autoplay: Automatically begin playing this media. Embedding Countdowns You can embed a countdown by using braces: {C123} Quoting Text To quote text, preface it with an >: > This is quoted text. This appears like this: This is quoted text. Embedding Media If you set a configuration flag, you can embed media directly in text: remarkup.enable-embedded-youtube: allows you to paste in YouTube videos and have them render inline. This option is disabled by default because it has security and/or silliness implications. Carefully read the description before enabling it. Image Macros You can upload image macros (More Stuff -> Macro) which will replace text strings with the image you specify. For instance, you could upload an image of a dancing banana to create a macro named "peanutbutterjellytime", and then any time you type that string on a separate line it will be replaced with the image of a dancing banana. Memes You can also use image macros in the context of memes. For example, if you have an image macro named grumpy, you can create a meme by doing the following: {meme, src = grumpy, above = toptextgoeshere, below = bottomtextgoeshere} By default, the font used to create the text for the meme is tuffy.ttf. For the more authentic feel of impact.ttf, you simply have to place the Impact TrueType font in the Phabricator subfolder /resources/font/. If Remarkup detects the presence of impact.ttf, it will automatically use it. Mentioning Users In Differential and Maniphest, you can mention another user by writing: @username When you submit your comment, this will add them as a CC on the revision or task if they aren't already CC'd. Icons You can add icons to comments using the {icon ...} syntax. For example: {icon camera} This renders: You can select a color for icons: {icon camera color=blue} This renders: For a list of available icons and colors, check the UIExamples application. (The icons are sourced from FontAwesome, so you can also browse the collection there.) You can add spin to make the icon spin: {icon cog spin} This renders: Phriction Documents You can link to Phriction documents with a name or path: Make sure you sign and date your [[legal/Letter of Marque and Reprisal]]! By default, the link will render with the document title as the link name. With a pipe (|), you can retitle the link. Use this to mislead your opponents: Check out these [[legal/boring_documents/ | exciting legal documents]]! Links to pages which do not exist are shown in red. Links to pages which exist but which the viewer does not have permission to see are shown with a lock icon, and the link will not disclose the page title. If you begin a link path with ./ or ../, the remainder of the path will be evaluated relative to the current wiki page. For example, if you are writing content for the document fruit/ a link to [[./guava]] is the same as a link to [[fruit/guava]] from elsewhere. Relative links may use ../ to transverse up the document tree. From the produce/vegetables/ page, you can use [[../fruit/guava]] to link to the produce/fruit/guava page. Relative links do not work when used outside of wiki pages. For example, you can't use a relative link in a comment on a task, because there is no reasonable place for the link to start resolving from. When documents are moved, relative links are not automatically updated: they are preserved as currently written. After moving a document, you may need to review and adjust any relative links it contains. Literal Blocks To place text in a literal block use %%%: Text that won't be processed by remarkup [[http://www.example.com | example]] Remarkup will not process the text inside of literal blocks (other than to escape HTML and preserve line breaks). Tables Remarkup supports simple table syntax. For example, this: | Fruit | Color | Price | Peel? | ----- | ----- | ----- | ----- | Apple | red | `$0.93` | no | Banana | yellow | `$0.19` | **YES** ...produces this: Fruit Color Price Peel? Apple red $0.93 no Banana yellow $0.19 YES Remarkup also supports a simplified HTML table syntax. For example, this: <table> <tr> <th>Fruit</th> <th>Color</th> <th>Price</th> <th>Peel?</th> </tr> <tr> <td>Apple</td> <td>red</td> <td>`$0.93`</td> <td>no</td> </tr> <tr> <td>Banana</td> <td>yellow</td> <td>`$0.19`</td> <td>**YES**</td> </tr> </table> ...produces this: Fruit Color Price Peel? Apple red $0.93 no Banana yellow $0.19 YES Some general notes about this syntax:.