ms-be1027 has faulty hw and ready to be decom
== Decommission Checklist ==
[x] - all system services confirmed offline from production use
[x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place.
[x] - remove system from all lvs/pybal active configuration
[x] - any service group puppet/heira/dsh config removed
[x] - remove site.pp
START NON-INTERRUPPTABLE STEPS
[x] - disable puppet on host
[x] - power down host
[] - update status in netbox (inventory for decom, planned for spare)
[] - disable switch port
[] - switch port assignment noted on this task (for later removal)
[x] - remove all remaining puppet references (include role::spare)
[x] - remove production dns entries
[x] - puppet node clean, puppet node deactivate (handled by wmf-decommission-host)
[x] - remove debmonitor entries
END NON-INTERRUPPTABLE STEPS
[] - system disks wiped (by onsite) use hdparm for ssds and wipe for hdds
[] - IF DECOM: system unracked and decommissioned (by onsite), update racktables with result
[] - IF DECOM: switch port configration removed from switch once system is unracked.
[] - IF DECOM: add system to decommission tracking google sheet
[] - IF DECOM: mgmt dns entries removed.