Change Details

parse2001.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2002.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2003.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2004.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2005.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2006.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2007.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2008.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2009.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2010.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2011.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2012.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2013.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2014.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2014.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2015.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2016.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2017.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2018.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2019.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2020.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag

parse2001.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2002.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2003.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2004.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2005.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2006.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2007.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2008.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2009.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2010.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2011.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2012.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2013.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2014.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2014.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2015.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2016.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2017.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2018.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2019.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2020.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag

parse2001.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2002.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2003.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2004.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2005.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2006.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2007.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2008.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2009.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2010.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2011.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2012.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2013.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2014.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2014.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2015.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2016.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2017.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2018.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2019.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag parse2020.codfw.wmnet **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag