This task will track the racking and setup of two new labvirt hosts, labvirt1019 and labvirt1020. These hosts will be used to replace use of labsdb100[4-7], by running instances for the labsdb use.
Racking Proposal: These have to go into the labs-hosts1-b-eqiad vlan, so they need to rack in row B. The 10Gbit is for future expansion, so just wire up eth0 1Gbit for now. Don't rack both of these new hosts in the same rack, since they'll both be doing labsdb type instances.
HW Raid setup: Raid10 of the SSDs.
labvirt1019:
[x] - receive in system on #procurement task T162486
[x] - rack system with proposed racking plan (see above) & update racktables (include all system info plus location)
[x] - bios/drac/serial setup/testing
[x] - mgmt dns entries added for both asset tag and hostname
[] - network port setup (description, enable, labs-hosts1-b-eqiad vlan)
** end on-site specific steps
[x] - production dns entries added (labs-hosts1-b-eqiad)
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation (trusty)
[] - puppet/salt accept/initial run
[] - handoff for service implementation
labvirt1020:
[x] - receive in system on #procurement task T162486
[x] - rack system with proposed racking plan (see above) & update racktables (include all system info plus location)
[x] - bios/drac/serial setup/testing
[x] - mgmt dns entries added for both asset tag and hostname
[] - network port setup (description, enable, labs-hosts1-b-eqiad vlan)
** end on-site specific steps
[x] - production dns entries added (labs-hosts1-b-eqiad)
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation (trusty)
[] - puppet/salt accept/initial run
[] - handoff for service implementation