Change Details

This task will track the racking, setup, and OS installation of an-druid100[345] == Hostname / Racking / Installation Details == **Hostnames:** an-druid100[345] **Racking Proposal:** Avoid sharing with an-druid100[12] (racks A5 & C3) as its the same cluster. Attempt to avoid racking with druid100[4-8] (A6,B6,D6,B3,D5) if possible so they could technically combine pools, but not as important as avoiding A5 and C3 an-druid rack sharing. **Networking/Subnet/VLAN/IP:** 1G, analytics vlan **Partitioning/Raid:** match an-druid100[12] **OS Distro:** buster == Per host setup checklist == Each host should have its own setup checklist copied and pasted into the list below. an-druid1003: [x] - receive in system on #procurement task T271146 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged an-druid1004: [x] - receive in system on #procurement task T271146 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged an-druid1005: [x] - receive in system on #procurement task T271146 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged **Once the system(s) above have had all checkbox steps completed, this task can be resolved.**

This task will track the racking, setup, and OS installation of an-druid100[345] == Hostname / Racking / Installation Details == **Hostnames:** an-druid100[345] **Racking Proposal:** Avoid sharing with an-druid100[12] (racks A5 & C3) as its the same cluster. Attempt to avoid racking with druid100[4-8] (A6,B6,D6,B3,D5) if possible so they could technically combine pools, but not as important as avoiding A5 and C3 an-druid rack sharing. **Networking/Subnet/VLAN/IP:** 1G, analytics vlan **Partitioning/Raid:** match an-druid100[12] **OS Distro:** buster == Per host setup checklist == Each host should have its own setup checklist copied and pasted into the list below. an-druid1003: [x] - receive in system on #procurement task T271146 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - bios/idrac firmware updated [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged an-druid1004: [x] - receive in system on #procurement task T271146 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [] - bios/idrac firmware updated [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged an-druid1005: [x] - receive in system on #procurement task T271146 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - bios/idrac firmware updated [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged **Once the system(s) above have had all checkbox steps completed, this task can be resolved.**

This task will track the racking, setup, and OS installation of an-druid100[345] == Hostname / Racking / Installation Details == **Hostnames:** an-druid100[345] **Racking Proposal:** Avoid sharing with an-druid100[12] (racks A5 & C3) as its the same cluster. Attempt to avoid racking with druid100[4-8] (A6,B6,D6,B3,D5) if possible so they could technically combine pools, but not as important as avoiding A5 and C3 an-druid rack sharing. **Networking/Subnet/VLAN/IP:** 1G, analytics vlan **Partitioning/Raid:** match an-druid100[12] **OS Distro:** buster == Per host setup checklist == Each host should have its own setup checklist copied and pasted into the list below. an-druid1003: [x] - receive in system on #procurement task T271146 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm).x] - bios/idrac firmware updated [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-hostx] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged an-druid1004: [x] - receive in system on #procurement task T271146 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [] - bios/idrac firmware updated [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged an-druid1005: [x] - receive in system on #procurement task T271146 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - bios/idrac firmware updated [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged **Once the system(s) above have had all checkbox steps completed, this task can be resolved.**