Change Details

Not sure of the exact steps, but inspired from T83045: [x] Assign IP [x] Obtain image [x] Rack device (or at least assign rack space) [x] Add device to Netbox [x] Configure switch port in sandbox vlan [x] load image on the device (see https://atlas.ripe.net/docs/anchor-installation-v2/ ) [x] Connect anchor's uplink and console [x] Verify connectivity to the anchor [x] On the RIPE website, go to the "My Atlas" menu and then "Anchors", and check the box "software is installed" [ ] Add Anchor to monitoring

Not sure of the exact steps, but inspired from T83045: [x] Assign IP [x] Obtain image [x] Rack device (or at least assign rack space) [x] Add device to Netbox [x] Configure switch port in sandbox vlan [x] load image on the device (see https://atlas.ripe.net/docs/anchor-installation-v2/ ) [x] Connect anchor's uplink and console [x] Verify connectivity to the anchor [x] On the RIPE website, go to the "My Atlas" menu and then "Anchors", and check the box "software is installed" [x] Add Anchor to monitoring

Not sure of the exact steps, but inspired from T83045: [x] Assign IP [x] Obtain image [x] Rack device (or at least assign rack space) [x] Add device to Netbox [x] Configure switch port in sandbox vlan [x] load image on the device (see https://atlas.ripe.net/docs/anchor-installation-v2/ ) [x] Connect anchor's uplink and console [x] Verify connectivity to the anchor [x] On the RIPE website, go to the "My Atlas" menu and then "Anchors", and check the box "software is installed" [ x] Add Anchor to monitoring