**<ps1-d5-eqiad & ps2-d5-eqiad>:**
[] - apply asset tags to each tower (both primary and link towers) as well has hostname labels.
[] - add new PDUs into netbox with the name prepend new- for initial netbox entry (once the old PDUs are removed and have their hostnames set to their asset tags, each PDU can be updated to remove the 'new-' prepend off the netbox hostname. example: 'new-ps1-c1-eqiad', 'new-ps2-c1-eqiad'.
[] - check the existing PDU and all connected cables. Ensure all are properly seated and all items are receiving power from both A and B sides before continuing. Anything not seated or not receiving dual power will be rebooted by continuing this checklist.
[] - install new PDU brackets for the link tower in the rack (see above note on orientation of the brackets.)
[] - install link PDU into the cabinet
[] - de-power old/existing B side power, and plug in new B side link PDU
[] - migrate all B side power connections to new link PDU
[] - Note all B side power connections, input into netbox for every single power port used.
[] - When relocating power cables, please try to ensure that the A and B sides use the same port. If server bast1001 plugs into port 5 on tower B, please also have it plug into port 5 on tower A.
[] - audit all B side connections to ensure all devices are receiving full power on the B side connection (any not receiving power will be rebooted when we move the A side connections next.)
[] - BEFORE UNPLUGGING THE A SIDE ORIGINAL TOWER: Login to the PDU via the HTTPS interface and reset it to factory defaults!
[] - Unmount existing PDU tower and set aside (if possible) to install new PDU brackets into the rack.
[] - Install new PDU tower into the rack, and route power cable for easy cut-over.
[] - de-power old/existing A side power, and plug in new A side link PDU
[] - migrate all A side power connections to new link PDU
[] - Note all A side power connections, input into netbox for every single power port used.
[] - audit all A side connections to ensure all devices are receiving full power on the A side connection.
[x] - connect serial to new PDU, ensure serial connection is functional
[x] - setup network configuration of new PDU via serial
[x] - setup remaining pdu configuration via https interface
[x] - update puppet repo file: modules/facilities/manifests/init.pp to add the senty4 line to the PDU entry.
[
x] - update librenms to reflect new PDU. (unclear if you must delete the old and add new, or if the new will update when its wholly online, so far only done via removing old and adding new device.
[] - Update IP address entries in netbox, for now just leave the ip tied to old PDU netbox entry (rob will change this to more detailed entry later)
[] - ensure all errors clear in icinga and netbox after work completes
**<ps1-d6-eqiad & ps2-d6-eqiad>:**
[] - apply asset tags to each tower (both primary and link towers) as well has hostname labels.
[] - add new PDUs into netbox with the name prepend new- for initial netbox entry (once the old PDUs are removed and have their hostnames set to their asset tags, each PDU can be updated to remove the 'new-' prepend off the netbox hostname. example: 'new-ps1-c1-eqiad', 'new-ps2-c1-eqiad'.
[] - check the existing PDU and all connected cables. Ensure all are properly seated and all items are receiving power from both A and B sides before continuing. Anything not seated or not receiving dual power will be rebooted by continuing this checklist.
[] - install new PDU brackets for the link tower in the rack (see above note on orientation of the brackets.)
[] - install link PDU into the cabinet
[] - de-power old/existing B side power, and plug in new B side link PDU
[] - migrate all B side power connections to new link PDU
[] - Note all B side power connections, input into netbox for every single power port used.
[] - When relocating power cables, please try to ensure that the A and B sides use the same port. If server bast1001 plugs into port 5 on tower B, please also have it plug into port 5 on tower A.
[] - audit all B side connections to ensure all devices are receiving full power on the B side connection (any not receiving power will be rebooted when we move the A side connections next.)
[] - BEFORE UNPLUGGING THE A SIDE ORIGINAL TOWER: Login to the PDU via the HTTPS interface and reset it to factory defaults!
[] - Unmount existing PDU tower and set aside (if possible) to install new PDU brackets into the rack.
[] - Install new PDU tower into the rack, and route power cable for easy cut-over.
[] - de-power old/existing A side power, and plug in new A side link PDU
[] - migrate all A side power connections to new link PDU
[] - Note all A side power connections, input into netbox for every single power port used.
[] - audit all A side connections to ensure all devices are receiving full power on the A side connection.
[x] - connect serial to new PDU, ensure serial connection is functional
[x] - setup network configuration of new PDU via serial
[x] - setup remaining pdu configuration via https interface
[x] - update puppet repo file: modules/facilities/manifests/init.pp to add the senty4 line to the PDU entry.
[
x] - update librenms to reflect new PDU. (unclear if you must delete the old and add new, or if the new will update when its wholly online, so far only done via removing old and adding new device.
[] - Update IP address entries in netbox, for now just leave the ip tied to old PDU netbox entry (rob will change this to more detailed entry later)
[] - ensure all errors clear in icinga and netbox after work completes