This task will track the racking and setup of labvirt102[12].eqiad.wmnet. These are essentially the same as the rest of our labvirts, using the same row (B) and same vlan/os as the rest of labvirt servers.
Special Note: Please ensure the virtualization options for the CPUs on these hosts are ENABLED, this is the opposite of the majority of the fleet.
Racking Proposal: These MUST be in row B of eqiad, with other labvirts.
labvirt1021:
[x] - receive in system on #procurement task T178937
[x] - rack system with proposed racking plan (see above) & update racktables (include all system info plus location)
[x] - bios/drac/serial setup/testing
[x] - mgmt dns entries added for both asset tag and hostname
[x] - network port setup (description, enable, labs vlan)
** end on-site specific steps
[] - production dns entries added
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation
[] - puppet accept/initial run
[] - handoff for service implementation
labvirt1022:
[x] - receive in system on #procurement task T178937
[x] - rack system with proposed racking plan (see above) & update racktables (include all system info plus location)
[x] - bios/drac/serial setup/testing
[x] - mgmt dns entries added for both asset tag and hostname
[x] - network port setup (description, enable, labs vlan)
** end on-site specific steps
[] - production dns entries added
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation
[] - puppet accept/initial run
[] - handoff for service implementation