Change Details

This task will track the swap of the onboard NIC from the 1GB to the 10GB+1GB NICs being ordered via T227148. Once the network cards are received in on T227148, this can proceed. Re-image question: We will need an answer on this, will these be re-imaged? (perhaps @elukey will know) for the new network card? As it is an onboard network card, doing a re-image would result in the least unexpected issues from the change, but may not be something that can occur in quick succession across this fleet. kakfa-jumbo1001: [] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) [] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move [] - @robh sets up network port with the above info. [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1002: [] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) [] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move [] - @robh sets up network port with the above info. [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1003: [] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) [] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move [] - @robh sets up network port with the above info. [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1004: [] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) [] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move [] - @robh sets up network port with the above info. [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1005: [] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) [] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move [] - @robh sets up network port with the above info. [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1006: [] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) [] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move [] - @robh sets up network port with the above info. [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service

This task will track the swap of the onboard NIC from the 1GB to the 10GB+1GB NICs being ordered via T227148. Once the network cards are received in on T227148, this can proceed. Re-image question: We will need an answer on this, will these be re-imaged? (perhaps @elukey will know) for the new network card? As it is an onboard network card, doing a re-image would result in the least unexpected issues from the change, but may not be something that can occur in quick succession across this fleet. kakfa-jumbo1001: [x] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) [x] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move [] - @robh sets up network port with the above info. asw-a4-eqiad:39 [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1002: [x] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) No changes already in 10G Rack [x] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move . No changes already in 10G Rack [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1003: [x] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) [x] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move [] - @robh sets up network port with the above info. asw-b2-eqiad:35 [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1004: [x] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) . No changes already in 10G Rack [x] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move . No changes already in 10G Rack [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1005: [x] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) . No changes already in 10G Rack [x] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move . No changes already in 10G Rack [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1006: [x] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) [x] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move [] - @robh sets up network port with the above info. asw-d7-eqiad:36 [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service

This task will track the swap of the onboard NIC from the 1GB to the 10GB+1GB NICs being ordered via T227148. Once the network cards are received in on T227148, this can proceed. Re-image question: We will need an answer on this, will these be re-imaged? (perhaps @elukey will know) for the new network card? As it is an onboard network card, doing a re-image would result in the least unexpected issues from the change, but may not be something that can occur in quick succession across this fleet. kakfa-jumbo1001: [x] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) [x] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move [] - @robh sets up network port with the above info. asw-a4-eqiad:39 [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1002: [x] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) [] - @jclark-ctr lists off on this task what rack and port# the No changes already in 10G connection will be on this task in advance of moveRack [] - @robh sets up network port with the above info.x] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move . No changes already in 10G Rack [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1003: [x] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) [x] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move [] - @robh sets up network port with the above info. asw-b2-eqiad:35 [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1004: [x] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) . No changes already in 10G Rack [x] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move [] - @robh sets up network port with the above info. . No changes already in 10G Rack [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1005: [x] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) [] - @jclark-ctr lists off on this task what rack and port# the . No changes already in 10G connection will be on this task in advance of moveRack [] - @robh sets up network port with the above info.x] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move . No changes already in 10G Rack [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service kakfa-jumbo1006: [x] - determine what 10G rack (within the same row) this can move into (avoid's IP change if stays in the same row.) [x] - @jclark-ctr lists off on this task what rack and port# the 10G connection will be on this task in advance of move [] - @robh sets up network port with the above info. asw-d7-eqiad:36 [] - @elukey and @Jclark-ctr schedule downtime for this host, and put it offline [] - @Jclark-ctr moves server to new 10G rack and plugs into the 10G port he listed above, then ensure system posts (OS may or may not work, we just want to ensure it posts and sees the new hardware in bios) [] - @elukey takes over host troubleshooting and will attempt to fix via serial (to avoid reimage) or reimage (and avoid formatting /sev) as needed. [] - @elukey returns system to service