This task will track the racking, setup, and OS installation of kubestage100[34].eqiad.wmnet
== Hostname / Racking / Installation Details ==
**Hostnames:** kubestage100[34]
**Racking Proposal:** Replacing kubestage100[12], so just place into different rows than one another in 1G racks.
**Networking/Subnet/VLAN/IP:** single 1g prod connection to private1-vlan
**Partitioning/Raid:** sw raid, standard raid1-2dev
**OS Distro:** Stretch (cannot run Buster at this time)
== Per host setup checklist ==
Each host should have its own setup checklist copied and pasted into the list below.
kubestage1003:
[x] - receive in system on #procurement task T290199 & in coupa
[x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[] - bios/drac/serial setup/testing
[x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
[x] - network port setup via netbox, run homer to commit
[] - firmware update (idrac, bios, network, raid controller)
[] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
[] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host
[] - host state in netbox set to staged
kubestage1004:
[x] - receive in system on #procurement task T290199 & in coupa
[x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[] - bios/drac/serial setup/testing
[x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
[x] - network port setup via netbox, run homer to commit
[] - firmware update (idrac, bios, network, raid controller)
[] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
[] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host
[] - host state in netbox set to staged
**Once the system(s) above have had all checkbox steps completed, this task can be resolved.**