TASK AUTO-GENERATED by Nagios/Icinga RAID event handler
A degraded RAID (hpssacli) [[ https://icinga.wikimedia.org/cgi-bin/icinga/extinfo.cgi?type=2&host=labvirt1019&service=HP RAID | was detected ]] on host `labvirt1019`. An automatic snapshot of the current RAID status is attached below.
Please **sync with the service owner** to find the appropriate time window before actually replacing any failed hardware.
```
CRITICAL: Slot 0: no logical drives --- Slot 0: no drives --- Slot 1: OK: 1I:1:5, 1I:1:6, 1I:1:7, 1I:1:8, 2I:1:1, 2I:1:2, 2I:1:3, 2I:1:4, 2I:2:1, 2I:2:2 - Controller: OK - Battery count: 0
$ sudo /usr/local/lib/nagios/plugins/get_raid_status_hpssacli
Error: The specified device does not have any logical drives.
Smart Array P840 in Slot 1
array A
Logical Drive: 1
Size: 7.3 TB
Fault Tolerance: 1+0
Strip Size: 256 KB
Full Stripe Size: 1280 KB
Status: OK
MultiDomain Status: OK
Caching: Disabled
Disk Name: /dev/sda
Mount Points: / 85.7 GB Partition Number 2
OS Status: LOCKED
Mirror Group 1:
physicaldrive 1I:1:5 (port 1I:box 1:bay 5, Solid State SATA, 1600.3 GB, OK)
physicaldrive 1I:1:6 (port 1I:box 1:bay 6, Solid State SATA, 1600.3 GB, OK)
physicaldrive 1I:1:7 (port 1I:box 1:bay 7, Solid State SATA, 1600.3 GB, OK)
physicaldrive 1I:1:8 (port 1I:box 1:bay 8, Solid State SATA, 1600.3 GB, OK)
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, Solid State SATA, 1600.3 GB, OK)
Mirror Group 2:
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, Solid State SATA, 1600.3 GB, OK)
physicaldrive 2I:1:3 (port 2I:box 1:bay 3, Solid State SATA, 1600.3 GB, OK)
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, Solid State SATA, 1600.3 GB, OK)
physicaldrive 2I:2:1 (port 2I:box 2:bay 1, Solid State SATA, 1600.3 GB, OK)
physicaldrive 2I:2:2 (port 2I:box 2:bay 2, Solid State SATA, 1600.3 GB, OK)
Drive Type: Data
LD Acceleration Method: HPE SSD Smart Path
```