This task will track the racking, setup, and OS installation of ganeti202[78].codfw.wmnet
== Hostname / Racking / Installation Details ==
**Hostnames:** ganeti202[78].codfw.wmnet
**Racking Proposal:** Please add these twoin row A in two different racks different from A5. If row A is too full, instead in two B, in racks other than B1 or B5.
**Networking/Subnet/VLAN/IP:** 10G, same VLAN/IP setup as existing Ganeti servers
**Partitioning/Raid:** partman/custom/ganeti-raid5.cfg
**OS Distro:** Buster
== Per host setup checklist ==
Each host should have its own setup checklist copied and pasted into the list below.
ganeti2027.codfw.wmnet:
[x] - receive in system on #procurement task T291973 & in coupa
[x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[x] - bios/drac/serial setup/testing
[x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
[x] - network port setup via netbox, run homer to commit
[x] - firmware update (idrac, bios, network, raid controller)
[x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
[] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host
[] - host state in netbox set to staged
ganeti2028.codfw.wmnet:
[x] - receive in system on #procurement task T291973 & in coupa
[x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[x] - bios/drac/serial setup/testing
[x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
[x] - network port setup via netbox, run homer to commit
[x] - firmware update (idrac, bios, network, raid controller)
[x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
[] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host
[] - host state in netbox set to staged
**Once the system(s) above have had all checkbox steps completed, this task can be resolved.**