This task will track the replacement of the [[ https://netbox.wikimedia.org/dcim/devices/1722/ | scs-ulsfo ]] with the [[ https://netbox.wikimedia.org/dcim/devices/2212/ | future-scs-ulsfo ]] (updated model with dual power input and does away with the requirement of cross over cables.)
Since this does away with cross over cables, we will need to order some replacement orange patch cables to replace the ones listed below:
| port # | device | length of replacement orange patch cable (in feet) |
| 1 | cr3-ulsfo | 3
| 2 | asw1-ulsfo | 3
| 3 | mr1-ulsfo | 2
| 4 | cr4-ulsfo | 6
| 5 | asw2-ulsfo | 6
| 6 | ps-103.02.22 | 4
| 7 | ps-103.02.23 | 6
| 8 | atlas-ulsfo (not connected yet) | 6
Once we have all the cabled needed, the following checklist can be followed:
[] - plan unavailability to serial/mgmt to all the devices listed above
[] - save scs-ulsfo config to local laptop for migration/restoration
[] - wipe config of existing scs-ulsfo and remove it from the rack (update netbox status and racking assignment)
[] - install new scs-ulsfo in old rack U
[] - connect all new orange patch cables, update netbox with the label numbers/assignments