This task will track the setup and installation of 3 new ms-be hosts ordered via T228461.
Hostnames: ms-be105[7-9].eqiad.wmnet
Racking Proposal: The other 6 ordered on this batch are in C2, A7, B4, B7, C4, D2, D7. Try to locate these three in 10G racks A4, B2, D4. (selected as they are 10G racks not used by other ms-be hosts ordered in this batch of 9 servers.)
Networking/Subnet/VLAN/IP: Internal subnet per row
Partitioning/Raid: use existing ms-be setup - All disks in their own single disk raid0 arrays including ssd, and the ssds must show up as sda/sdb and boot devices.
These hosts are replacing hosts ms-be101[6-8]. All three of those replaced hosts are located in B5-eqiad. We don't want to put the replacement hosts in that rack as we want rack/row diversity and 10G capability.
**ms-be1057:**
[X] - receive in system on #procurement task T228461
[X] - rack system in A2
[] - bios/drac/serial setup/testing
[] - mgmt dns entries added for both asset tag and hostname
[] - network port setup (description, enable, vlan)
** end on-site specific steps
[] - production dns entries added
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation
[] - puppet accept/initial run
[] - host state in netbox set to staged
[] - handoff for service implementation
[] - service implementer changes from 'staged' status to 'active' status in netbox'
**ms-be1058:**
[X] - receive in system on #procurement task T228461
[X] - rack system in B2 (even though row B has limited 10G space, this has to be in row B. B2 has no other new ms-be hosts, where B[47] do.
[] - bios/drac/serial setup/testing
[] - mgmt dns entries added for both asset tag and hostname
[] - network port setup (description, enable, vlan)
** end on-site specific steps
[] - production dns entries added
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation
[] - puppet accept/initial run
[] - host state in netbox set to staged
[] - handoff for service implementation
[] - service implementer changes from 'staged' status to 'active' status in netbox'
**ms-be1059:**
[X] - receive in system on #procurement task T228461
[X] - rack system in D2.
[] - bios/drac/serial setup/testing
[] - mgmt dns entries added for both asset tag and hostname
[] - network port setup (description, enable, vlan)
** end on-site specific steps
[] - production dns entries added
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation
[] - puppet accept/initial run
[] - host state in netbox set to staged
[] - handoff for service implementation
[] - service implementer changes from 'staged' status to 'active' status in netbox'