Change Details

After T224794 was resolved, the event handler on the RAID status of helium was never re-enabled, hence me creating this ticket manually. Yesterday, after I noticed that the server was no access to the shelf at all (thankfully the fs went into read-only mode way before that, barring out any fs corruption), I powercycled the system only to discover that slot3 disk was utterly failed kernel logged on boot: `` megaraid_sas 0000:04:00.0: 543495 (621450878s/0x0004/CRIT) - Enclosure PD 0f(c 00/p0) phy bad for slot 3 `` megacli fully fails to see the drive as /usr/sbin/megacli -PDList -a0 returns the drives in slot2 and slot4 (and all other slots before and after) but not slot 3. This is a RAID6 so we are still fine, but if we have a spare we should replace that drive ASAP.

After T224794 was resolved, the event handler on the RAID status of helium was never re-enabled, hence me creating this ticket manually. Yesterday, after I noticed that the server was no access to the shelf at all (thankfully the fs went into read-only mode way before that, barring out any fs corruption), I powercycled the system only to discover that slot3 disk was utterly failed kernel logged on boot: ``` megaraid_sas 0000:04:00.0: 543495 (621450878s/0x0004/CRIT) - Enclosure PD 0f(c 00/p0) phy bad for slot 3 ``` megacli fully fails to see the drive as /usr/sbin/megacli -PDList -a0 returns the drives in slot2 and slot4 (and all other slots before and after) but not slot 3. This is a RAID6 so we are still fine, but if we have a spare we should replace that drive ASAP.

After T224794 was resolved, the event handler on the RAID status of helium was never re-enabled, hence me creating this ticket manually. Yesterday, after I noticed that the server was no access to the shelf at all (thankfully the fs went into read-only mode way before that, barring out any fs corruption), I powercycled the system only to discover that slot3 disk was utterly failed kernel logged on boot: ``` megaraid_sas 0000:04:00.0: 543495 (621450878s/0x0004/CRIT) - Enclosure PD 0f(c 00/p0) phy bad for slot 3 ``` megacli fully fails to see the drive as /usr/sbin/megacli -PDList -a0 returns the drives in slot2 and slot4 (and all other slots before and after) but not slot 3. This is a RAID6 so we are still fine, but if we have a spare we should replace that drive ASAP.