Change Details

Please note that we ordered 14 total ganeti nodes via #procurement task T214088. The breakdown is as follows: eqiad: (4) ganeti refresh + (4) ganeti nodes for CI (releng) + (6) eqiad: ganeti nodes for expansion This breakdown makes it seem like 10 of these will go into the general ganeti pool, and 4 will go for CI/release engineering use. This task will track the racking and setup of the 10 general ganeti nodes. For this, 4 of them are replacing ganeti100[1-4], while the rest merely expand the service group. Hostname Proposal: ganeti1009+ Racking Proposal: 4 of these nodes can share with ganeti100[1-4], which are in C4 and C7 (10G racks with 1G hosts, so best to avoid 10G racks for these 1G new hosts as well) We also have existing ganeti nodes in A4, A3 (2), A6, and A5. So place the new nodes as follows: Any 1G rack that isn't A3, A4, A5, or A6. Ideally we spread these out to rows C and D some. ganeti1009: [] - receive in system on #procurement task T214088 [X] - rack system with C3/u28 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1010: [] - receive in system on #procurement task T214088 [X] - rack system C5/u8 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1011: [] - receive in system on #procurement task T214088 [X] - rack system C6/u37 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1012: [] - receive in system on #procurement task T214088 [X] - rack system C8/u20 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1013: [] - receive in system on #procurement task T214088 [X] - rack system B3/u14 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1014: [] - receive in system on #procurement task T214088 [X] - rack system B3/u15 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1015: [] - receive in system on #procurement task T214088 [X] - rack system B5/u21 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1016: [] - receive in system on #procurement task T214088 [X] - rack system B5/u22 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1017: [] - receive in system on #procurement task T214088 [X] - rack system B6/u31& update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1018: [] - receive in system on #procurement task T214088 [X] - rack system B8/u29 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox'

Please note that we ordered 14 total ganeti nodes via #procurement task T214088. The breakdown is as follows: eqiad: (4) ganeti refresh + (4) ganeti nodes for CI (releng) + (6) eqiad: ganeti nodes for expansion This breakdown makes it seem like 10 of these will go into the general ganeti pool, and 4 will go for CI/release engineering use. This task will track the racking and setup of the 10 general ganeti nodes. For this, 4 of them are replacing ganeti100[1-4], while the rest merely expand the service group. Hostname Proposal: ganeti1009+ Racking Proposal: 4 of these nodes can share with ganeti100[1-4], which are in C4 and C7 (10G racks with 1G hosts, so best to avoid 10G racks for these 1G new hosts as well) We also have existing ganeti nodes in A4, A3 (2), A6, and A5. So place the new nodes as follows: Any 1G rack that isn't A3, A4, A5, or A6. Ideally we spread these out to rows C and D some. ganeti1009: [] - receive in system on #procurement task T214088 [X] - rack system with C3/u28 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - ipmi over lan is not enabled, fix this! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1010: [] - receive in system on #procurement task T214088 [X] - rack system C5/u8 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1011: [] - receive in system on #procurement task T214088 [X] - rack system C6/u37 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1012: [] - receive in system on #procurement task T214088 [X] - rack system C8/u20 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1013: [] - receive in system on #procurement task T214088 [X] - rack system B3/u14 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1014: [] - receive in system on #procurement task T214088 [X] - rack system B3/u15 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1015: [] - receive in system on #procurement task T214088 [X] - rack system B5/u21 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1016: [] - receive in system on #procurement task T214088 [X] - rack system B5/u22 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1017: [] - receive in system on #procurement task T214088 [X] - rack system B6/u31& update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1018: [] - receive in system on #procurement task T214088 [X] - rack system B8/u29 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox'

Please note that we ordered 14 total ganeti nodes via #procurement task T214088. The breakdown is as follows: eqiad: (4) ganeti refresh + (4) ganeti nodes for CI (releng) + (6) eqiad: ganeti nodes for expansion This breakdown makes it seem like 10 of these will go into the general ganeti pool, and 4 will go for CI/release engineering use. This task will track the racking and setup of the 10 general ganeti nodes. For this, 4 of them are replacing ganeti100[1-4], while the rest merely expand the service group. Hostname Proposal: ganeti1009+ Racking Proposal: 4 of these nodes can share with ganeti100[1-4], which are in C4 and C7 (10G racks with 1G hosts, so best to avoid 10G racks for these 1G new hosts as well) We also have existing ganeti nodes in A4, A3 (2), A6, and A5. So place the new nodes as follows: Any 1G rack that isn't A3, A4, A5, or A6. Ideally we spread these out to rows C and D some. ganeti1009: [] - receive in system on #procurement task T214088 [X] - rack system with C3/u28 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - ipmi over lan is not enabled, fix this! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1010: [] - receive in system on #procurement task T214088 [X] - rack system C5/u8 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1011: [] - receive in system on #procurement task T214088 [X] - rack system C6/u37 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1012: [] - receive in system on #procurement task T214088 [X] - rack system C8/u20 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1013: [] - receive in system on #procurement task T214088 [X] - rack system B3/u14 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1014: [] - receive in system on #procurement task T214088 [X] - rack system B3/u15 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1015: [] - receive in system on #procurement task T214088 [X] - rack system B5/u21 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1016: [] - receive in system on #procurement task T214088 [X] - rack system B5/u22 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1017: [] - receive in system on #procurement task T214088 [X] - rack system B6/u31& update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' genati1018: [] - receive in system on #procurement task T214088 [X] - rack system B8/u29 & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing - THE MGMT PASSWORD DID NOT WORK, MUST BE FIXED [] - update the netbox entry to show the SERVICE TAG for the serial, not the express service code. This is important! [] - mgmt dns entries added for both asset tag and hostname [] - network port setup (description, enable, vlan) ** end on-site specific steps [] - production dns entries added [] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox'