Change Details

== updated checklist for request == cloudvirt1009 migration to 10G: [] - put system offline in all checks for maint window [] - relocate to 10G rack and update netbox [] - enable PXE for 10G interfaces. [] - update switch configuration for new primary 10G and secondary 10G ports (remove old switch port information) [] - PXE boot and reimage system [] - reintroduce system into service cluster == original request == The server `cloudvirt1009.eqiad.wmnet` has been reallocated from a previous cluster (and renamed from `labvirt1009.eqiad.wmnet` (see parent task). Before we put any workload, we would like to evaluate if it's possible to get 10G for this server. However, this is what ethtool reports: ``` aborrero@cloudvirt1009:~ $ sudo ethtool ens3f0 Settings for ens3f0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full [...] Speed: 1000Mb/s Duplex: Full Port: Twisted Pair [...] Link detected: yes ``` ``` aborrero@cloudvirt1009:~ $ sudo ethtool ens3f1 Settings for ens3f1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full [...] Speed: 1000Mb/s Duplex: Full Port: Twisted Pair [...] Link detected: yes ``` Any advice from DC-ops, @robh ?

== updated checklist for request == cloudvirt1009 migration to 10G: [x] - put system offline in all checks for maint window [x] - relocate to 10G rack and update netbox [x] - enable PXE for 10G interfaces. [x] - update switch configuration for new primary 10G Nic [] - update switch configuration and attach secondary 10G port [x] - remove old switch port info [x] - PXE boot and reimage system [] - reintroduce system into service cluster == original request == The server `cloudvirt1009.eqiad.wmnet` has been reallocated from a previous cluster (and renamed from `labvirt1009.eqiad.wmnet` (see parent task). Before we put any workload, we would like to evaluate if it's possible to get 10G for this server. However, this is what ethtool reports: ``` aborrero@cloudvirt1009:~ $ sudo ethtool ens3f0 Settings for ens3f0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full [...] Speed: 1000Mb/s Duplex: Full Port: Twisted Pair [...] Link detected: yes ``` ``` aborrero@cloudvirt1009:~ $ sudo ethtool ens3f1 Settings for ens3f1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full [...] Speed: 1000Mb/s Duplex: Full Port: Twisted Pair [...] Link detected: yes ``` Any advice from DC-ops, @robh ?

== updated checklist for request == cloudvirt1009 migration to 10G: [x] - put system offline in all checks for maint window [x] - relocate to 10G rack and update netbox [x] - enable PXE for 10G interfaces. [x] - update switch configuration for new primary 10G and secondary 10G ports (remove old switch port information)Nic [] - update switch configuration and attach secondary 10G port [x] - remove old switch port info [x] - PXE boot and reimage system [] - reintroduce system into service cluster == original request == The server `cloudvirt1009.eqiad.wmnet` has been reallocated from a previous cluster (and renamed from `labvirt1009.eqiad.wmnet` (see parent task). Before we put any workload, we would like to evaluate if it's possible to get 10G for this server. However, this is what ethtool reports: ``` aborrero@cloudvirt1009:~ $ sudo ethtool ens3f0 Settings for ens3f0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full [...] Speed: 1000Mb/s Duplex: Full Port: Twisted Pair [...] Link detected: yes ``` ``` aborrero@cloudvirt1009:~ $ sudo ethtool ens3f1 Settings for ens3f1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full [...] Speed: 1000Mb/s Duplex: Full Port: Twisted Pair [...] Link detected: yes ``` Any advice from DC-ops, @robh ?