This task will track the racking, setup, and OS installation of ms-be2057.codfw.wmnet.
**Need By:** Please note this is a try-and-buy test of the new R740xd2, and blocks the buying of MANY ms-be systems in Q1 (both codfw and eqiad). So this should be a high priority to get it racked and remotely accessible so testing for both OS installation, partitioning, and system testing can take place ASAP.
Test Server Notes: Please do NOT throw out the box for this host, as it is a try and buy system. We expect to keep this host, but until we are sure, we should keep the box in storage.
== Hostname / Racking / Installation Details ==
**Hostnames:** ms-be2057
**Racking Proposal:** 10G rack, no other restriction other than ideally a rack with the least shared ms-be systems.
**Networking/Subnet/VLAN/IP:** 10g, internal vlan
**Partitioning/Raid:** Setup identical to existing ms-be, namely each disk in single raid0 array. SFF/SDD disks must be the first two arrays (i.e. sda/sdb from the OS perspective)
**OS Distro:** Buster
== Per host setup checklist ==
Each host should have its own setup checklist copied and pasted into the list below.
ms-be2057: B4 U 12/13 xe-4/0/10
[x] - receive in system on #procurement task <enter task # here> & in coupa
[x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[x] - bios/drac/serial setup/testing
[x] - mgmt dns entries added for both asset tag and hostname
[x] - network port setup (description, enable, vlan)
** end on-site specific steps
[] - production dns entries added
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation
[] - puppet accept/initial run (with role:spare)
[] - host state in netbox set to staged
**Once the system(s) above have had all checkbox steps completed, this task can be resolved.**