Change Details

This task will track the setup of the three new ganeti nodes for eqsin. These are identical in specifcation to ganeti400[123] which were setup on T226444. Racking Plan: These were racked with the odd numbered in one rack, and the even in the other, per the policies for eqsin server locations. ganeti5001: [x] - receive in system on #procurement task T222284 [x] - write up detailed instructions for remote hands to wire up the system (mgmt, network, power) and step by step directions for setup. [x] - coordinate with @robh and @wiki_willy to get remote hands contractor to access systems and follow directions. [x] - review of on-site work before full implementation of server. [x] - bios/drac/serial setup/testing [x] - mgmt dns entries added for both asset tag and hostname [x] - network port setup (description, enable, vlan) ** end on-site specific steps [x] - production dns entries added [x] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' ganeti5002: [x] - receive in system on #procurement task T222284 [x] - write up detailed instructions for remote hands to wire up the system (mgmt, network, power) and step by step directions for setup. [x] - coordinate with @robh and @wiki_willy to get remote hands contractor to access systems and follow directions. [x] - review of on-site work before full implementation of server. [x] - bios/drac/serial setup/testing [x] - mgmt dns entries added for both asset tag and hostname [x] - network port setup (description, enable, vlan) ** end on-site specific steps [x] - production dns entries added [x] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' ganeti5003: [x] - receive in system on #procurement task T222284 [x] - write up detailed instructions for remote hands to wire up the system (mgmt, network, power) and step by step directions for setup. [x] - coordinate with @robh and @wiki_willy to get remote hands contractor to access systems and follow directions. [x] - review of on-site work before full implementation of server. [x] - bios/drac/serial setup/testing [x] - mgmt dns entries added for both asset tag and hostname [x] - network port setup (description, enable, vlan) ** end on-site specific steps [x] - production dns entries added [x] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox'

This task will track the setup of the three new ganeti nodes for eqsin. These are identical in specifcation to ganeti400[123] which were setup on T226444. Racking Plan: These were racked with the odd numbered in one rack, and the even in the other, per the policies for eqsin server locations. ganeti5001: [x] - receive in system on #procurement task T222284 [x] - write up detailed instructions for remote hands to wire up the system (mgmt, network, power) and step by step directions for setup. [x] - coordinate with @robh and @wiki_willy to get remote hands contractor to access systems and follow directions. [x] - review of on-site work before full implementation of server. [x] - bios/drac/serial setup/testing [x] - mgmt dns entries added for both asset tag and hostname [x] - network port setup (description, enable, vlan) ** end on-site specific steps [x] - production dns entries added [x] - operations/puppet update (install_server at minimum, other files if possible) [x] - OS installation [x] - puppet accept/initial run [x] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' ganeti5002: [x] - receive in system on #procurement task T222284 [x] - write up detailed instructions for remote hands to wire up the system (mgmt, network, power) and step by step directions for setup. [x] - coordinate with @robh and @wiki_willy to get remote hands contractor to access systems and follow directions. [x] - review of on-site work before full implementation of server. [x] - bios/drac/serial setup/testing [x] - mgmt dns entries added for both asset tag and hostname [x] - network port setup (description, enable, vlan) ** end on-site specific steps [x] - production dns entries added [x] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' ganeti5003: [x] - receive in system on #procurement task T222284 [x] - write up detailed instructions for remote hands to wire up the system (mgmt, network, power) and step by step directions for setup. [x] - coordinate with @robh and @wiki_willy to get remote hands contractor to access systems and follow directions. [x] - review of on-site work before full implementation of server. [x] - bios/drac/serial setup/testing [x] - mgmt dns entries added for both asset tag and hostname [x] - network port setup (description, enable, vlan) ** end on-site specific steps [x] - production dns entries added [x] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox'

This task will track the setup of the three new ganeti nodes for eqsin. These are identical in specifcation to ganeti400[123] which were setup on T226444. Racking Plan: These were racked with the odd numbered in one rack, and the even in the other, per the policies for eqsin server locations. ganeti5001: [x] - receive in system on #procurement task T222284 [x] - write up detailed instructions for remote hands to wire up the system (mgmt, network, power) and step by step directions for setup. [x] - coordinate with @robh and @wiki_willy to get remote hands contractor to access systems and follow directions. [x] - review of on-site work before full implementation of server. [x] - bios/drac/serial setup/testing [x] - mgmt dns entries added for both asset tag and hostname [x] - network port setup (description, enable, vlan) ** end on-site specific steps [x] - production dns entries added [x] - operations/puppet update (install_server at minimum, other files if possible) [x] - OS installation [x] - puppet accept/initial run (with role:spare) [x] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' ganeti5002: [x] - receive in system on #procurement task T222284 [x] - write up detailed instructions for remote hands to wire up the system (mgmt, network, power) and step by step directions for setup. [x] - coordinate with @robh and @wiki_willy to get remote hands contractor to access systems and follow directions. [x] - review of on-site work before full implementation of server. [x] - bios/drac/serial setup/testing [x] - mgmt dns entries added for both asset tag and hostname [x] - network port setup (description, enable, vlan) ** end on-site specific steps [x] - production dns entries added [x] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox' ganeti5003: [x] - receive in system on #procurement task T222284 [x] - write up detailed instructions for remote hands to wire up the system (mgmt, network, power) and step by step directions for setup. [x] - coordinate with @robh and @wiki_willy to get remote hands contractor to access systems and follow directions. [x] - review of on-site work before full implementation of server. [x] - bios/drac/serial setup/testing [x] - mgmt dns entries added for both asset tag and hostname [x] - network port setup (description, enable, vlan) ** end on-site specific steps [x] - production dns entries added [x] - operations/puppet update (install_server at minimum, other files if possible) [] - OS installation [] - puppet accept/initial run (with role:spare) [] - host state in netbox set to staged [] - handoff for service implementation [] - service implementer changes from 'staged' status to 'active' status in netbox'