HomePhabricator

Edit Form: decommission: einsteinium
DisabledPublic

This is a preview of the current form configuration.

Form Preview

This task will track the decommission-hardware of server einsteinium.wikimedia.org

The first 5 steps should be completed by the service owner that is returning the server to DC-ops (for reclaim to spare or decommissioning, dependent on server configuration and age.)

Steps for service owner:

  • - all system services confirmed offline from production use
  • - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place.
  • - remove system from all lvs/pybal active configuration
  • - any service group puppet/hiera/dsh config removed
  • - remove site.pp, replace with role(spare::system)
  • - unassign any owner from this task, check off completed steps.

Steps for DC-Ops:

The following steps cannot be interrupted, as it will leave the system in an unfinished state.

Start non-interrupt steps:

  • - disable puppet on host
  • - power down host
  • - disable switch port
  • - switch port assignment noted on this task (for later removal)
  • - remove all remaining puppet references (include role::spare)
  • - remove production dns entries
  • - puppet node clean, puppet node deactivate
  • - remove dbmonitor entries on neodymium/sarin: sudo curl -X DELETE https://debmonitor.discovery.wmnet/hosts/${HOST_FQDN} --cert /etc/debmonitor/ssl/cert.pem --key /etc/debmonitor/ssl/server.key

End non-interrupt steps.

  • - system disks wiped (by onsite)
  • - IF DECOM: system unracked and decommissioned (by onsite), update racktables with result
  • - IF DECOM: switch port configration removed from switch once system is unracked.
  • - IF DECOM: add system to decommission tracking google sheet
  • - IF DECOM: mgmt dns entries removed.
  • - IF RECLAIM: system added back to spares tracking (by onsite)