Change Details

This task will track the #decommission of servers `wdqs10[09-10].eqiad.wmnet` (decom cookbook has already been ran and hosts have been removed from `site.pp`) #### `wdqs1009.eqiad.wmnet` **Steps for service owner:** [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag #### `wdqs1010.eqiad.wmnet` [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag

This task will track the #decommission of servers `wdqs10[09-10].eqiad.wmnet` (decom cookbook has already been ran and hosts have been removed from `site.pp`) #### `wdqs1009.eqiad.wmnet` **Steps for service owner:** [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. #### `wdqs1010.eqiad.wmnet` [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed.

This task will track the #decommission of servers `wdqs10[09-10].eqiad.wmnet` (decom cookbook has already been ran and hosts have been removed from `site.pp`) #### `wdqs1009.eqiad.wmnet` **Steps for service owner:** [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [x] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag #### `wdqs1010.eqiad.wmnet` [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [] - reassign task from service owner to no owner and ensure the site project (ops-sitename depending on site of server) is assigned. **End service owner steps / Begin DC-Ops team steps:** [x] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [x] - IF DECOM:determine system unracked and decommissioned (by onsite)age, under 5 years are reclaimed to spare, update netbox with result and set state to offlineover 5 years are decommissioned. [x] - IF DECOM: mgmt dns entries removed.system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tagDECOM: mgmt dns entries removed.