Change Details

This task will track the racking, setup, and OS installation of backup100[4-7] == Hostname / Racking / Installation Details == **hostname:**backup1004-1007 **Racking Proposal:** Anywhere on 10G racks if full system, ideally not sharing a rack (for sure) or row (preferred). **Networking/Subnet/VLAN/IP:** 10G, production-eqiad-network. **Partitioning/Raid:** Software RAID1 for (2) OS SSDs and HW RAID 6 with writeback for (24) HDs. The recipe is the same as all other backup hosts: [[ https://phabricator.wikimedia.org/source/operations-puppet/browse/production/modules/install_server/files/autoinstall/partman/custom/backup-format.cfg | custom/backup-format.cfg ]] More details at: https://wikitech.wikimedia.org/wiki/Raid_setup#Dell_R740xd2 **OS Distro:** Buster == Per host setup checklist == backup1004: [x] - receive in system on #procurement task T264674 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - update firmware: idrac 5.00.00.00_A00, bios 2.11.2, h730p 25.5.8.0001_A16, network 2.1.80 [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged backup1005: [x] - receive in system on #procurement task T264674 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - update firmware: idrac 5.00.00.00_A00, bios 2.11.2, h730p 25.5.8.0001_A16, network 2.1.80 [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged backup1006: [x] - receive in system on #procurement task T264674 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - update firmware: idrac 5.00.00.00_A00, bios 2.11.2, h730p 25.5.8.0001_A16, network 2.1.80 [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - **Hardware Error:** Please note as of 2021-07-12, with all firmware updates, this has the error: "The System Board CP Right is absent." [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged backup1007: [x] - receive in system on #procurement task T264674 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - update firmware: idrac 5.00.00.00_A00, bios 2.11.2, h730p 25.5.8.0001_A16, network 2.1.80 [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged **Once the system(s) above have had all checkbox steps completed, this task can be resolved.**

This task will track the racking, setup, and OS installation of backup100[4-7] == Hostname / Racking / Installation Details == **hostname:**backup1004-1007 **Racking Proposal:** Anywhere on 10G racks if full system, ideally not sharing a rack (for sure) or row (preferred). **Networking/Subnet/VLAN/IP:** 10G, production-eqiad-network. **Partitioning/Raid:** Software RAID1 for (2) OS SSDs and HW RAID 6 with writeback for (24) HDs. The recipe is the same as all other backup hosts: [[ https://phabricator.wikimedia.org/source/operations-puppet/browse/production/modules/install_server/files/autoinstall/partman/custom/backup-format.cfg | custom/backup-format.cfg ]] More details at: https://wikitech.wikimedia.org/wiki/Raid_setup#Dell_R740xd2 **OS Distro:** Buster == Per host setup checklist == backup1004: [x] - receive in system on #procurement task T264674 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - update firmware: idrac 5.00.00.00_A00, bios 2.11.2, h730p 25.5.8.0001_A16, network 2.1.80 [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged backup1005: [x] - receive in system on #procurement task T264674 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - update firmware: idrac 5.00.00.00_A00, bios 2.11.2, h730p 25.5.8.0001_A16, network 2.1.80 [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged backup1006: [x] - receive in system on #procurement task T264674 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - update firmware: idrac 5.00.00.00_A00, bios 2.11.2, h730p 25.5.8.0001_A16, network 2.1.80 [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - **Hardware Error:** Please note as of 2021-07-12, with all firmware updates, this has the error: "The System Board CP Right is absent." [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged backup1007: [x] - receive in system on #procurement task T264674 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - update firmware: idrac 5.00.00.00_A00, bios 2.11.2, h730p 25.5.8.0001_A16, network 2.1.80 [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged **Once the system(s) above have had all checkbox steps completed, this task can be resolved.**

This task will track the racking, setup, and OS installation of backup100[4-7] == Hostname / Racking / Installation Details == **hostname:**backup1004-1007 **Racking Proposal:** Anywhere on 10G racks if full system, ideally not sharing a rack (for sure) or row (preferred). **Networking/Subnet/VLAN/IP:** 10G, production-eqiad-network. **Partitioning/Raid:** Software RAID1 for (2) OS SSDs and HW RAID 6 with writeback for (24) HDs. The recipe is the same as all other backup hosts: [[ https://phabricator.wikimedia.org/source/operations-puppet/browse/production/modules/install_server/files/autoinstall/partman/custom/backup-format.cfg | custom/backup-format.cfg ]] More details at: https://wikitech.wikimedia.org/wiki/Raid_setup#Dell_R740xd2 **OS Distro:** Buster == Per host setup checklist == backup1004: [x] - receive in system on #procurement task T264674 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - update firmware: idrac 5.00.00.00_A00, bios 2.11.2, h730p 25.5.8.0001_A16, network 2.1.80 [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged backup1005: [x] - receive in system on #procurement task T264674 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - update firmware: idrac 5.00.00.00_A00, bios 2.11.2, h730p 25.5.8.0001_A16, network 2.1.80 [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged backup1006: [x] - receive in system on #procurement task T264674 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - update firmware: idrac 5.00.00.00_A00, bios 2.11.2, h730p 25.5.8.0001_A16, network 2.1.80 [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - **Hardware Error:** Please note as of 2021-07-12, with all firmware updates, this has the error: "The System Board CP Right is absent." [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged backup1007: [x] - receive in system on #procurement task T264674 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - bios/drac/serial setup/testing [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [x] - network port setup via netbox, run homer to commit ** end on-site specific steps [x] - update firmware: idrac 5.00.00.00_A00, bios 2.11.2, h730p 25.5.8.0001_A16, network 2.1.80 [x] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [x] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [x] - host state in netbox set to staged **Once the system(s) above have had all checkbox steps completed, this task can be resolved.**