This task will track the racking, setup, and OS installation of <enter the FQDN/hostname of the hosts being setup here>
== Hostname / Racking / Installation Details ==
Hostname:
backup1002
array backup1002-array1
Racking Proposal:
Rack it on 10G-available racks, and try to avoid, if possible, proximity to backup1001
Networking/Subnet/VLAN/IP:
10G, single connection
Partitioning/Raid:
The 2 SSDs will be in RAID1 software. The array disks will be in RAID6 hw (raid controller). Because this will have 100TB, we may want to create 2 virtual RAID disks, each with RAID6. **DBA can take care of most of this** (this is a special host), as long as remote access to partitioning is available.
Partman: backup-format.cfg (got renamed from raid1-lvm-ext4-srv-plus-hwraid.cfg)
== Per host setup checklist ==
Each host should have its own setup checklist copied and pasted into the list below.
backup1002:
[] - receive in system on #procurement task <enter task # here>
[] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[] - bios/drac/serial setup/testing
[] - mgmt dns entries added for both asset tag and hostname
[] - network port setup (description, enable, vlan)
** end on-site specific steps
[] - production dns entries added
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation
[] - puppet accept/initial run (with role:spare)
[] - host state in netbox set to staged
**Once the system(s) above have had all checkbox steps completed, this task can be resolved.**