This task will track the racking, setup, and OS installation of dumpsdata100[45]
== Hostname / Racking / Installation Details ==
**Hostnames:** dumpsdata100[45]
**Racking Proposal:** Each in its own rack, in separate racks from the other three dumpsdata hosts
**Networking/Subnet/VLAN/IP:** Internal vlan, single 10G connection.
**Partitioning/Raid:** HW raid, 1 12-disk raid10 volume; two disks in raid 1 for the OS. Partman recipe should be dumpsdata100X.cfg for the initial install, and reset afterwards to dumpsdata100X-no-data-format.cfg once there is data on the arrays.
**OS Distro:** Buster
== Per host setup checklist ==
Each host should have its own setup checklist copied and pasted into the list below.
dumpsdata1004:
[x] - receive in system on #procurement task T280149 & in coupa
[x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[] - bios/drac/serial setup/testing
[] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
[] - network port setup via netbox, run homer to commit
[] - firmware update (idrac, bios, network, raid controller)
[] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
[] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host
[] - host state in netbox set to staged
dumpsdata1005:
[x] - receive in system on #procurement task T280149 & in coupa
[x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[] - bios/drac/serial setup/testing
[] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
[] - network port setup via netbox, run homer to commit
[] - firmware update (idrac, bios, network, raid controller)
[] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
[] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host
[] - host state in netbox set to staged
**Once the system(s) above have had all checkbox steps completed, this task can be resolved.**