This task will track the racking, setup, and OS installation of <enter the FQDN/hostname of the hosts being setup here>
== Hostname / Racking / Installation Details ==
**Hostnames:** What are the hostnames, and have you updated https://wikitech.wikimedia.org/wiki/Infrastructure_naming_conventions ?
**Racking Proposal:** Where should these systems be racked? Can they share with any existing systems or should they avoid any other systems sharing their rack or row?
**Networking/Subnet/VLAN/IP:** What are the network details? 1G or 10G? Only one network port connection, or more? Subnet/vlan and IP requirements per connect?
**Partitioning/Raid:** Is this hardware or software raid and what raid levels should be applied to each disk? What are the partitioning requirements and is there an existing partman recipe?
**OS Distro:** Stretch or Buster?
== Per host setup checklist ==
Each host should have its own setup checklist copied and pasted into the list below.
<hostname#1>:
[] - receive in system on #procurement task T251189
[] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[] - bios/drac/serial setup/testing
[] - mgmt dns entries added for both asset tag and hostname
[] - network port setup (description, enable, vlan)
** end on-site specific steps
[] - production dns entries added
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation
[] - puppet accept/initial run (with role:spare)
[] - host state in netbox set to staged
<hostname#2>:
[] - receive in system on #procurement task T251189
[] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[] - bios/drac/serial setup/testing
[] - mgmt dns entries added for both asset tag and hostname
[] - network port setup (description, enable, vlan)
** end on-site specific steps
[] - production dns entries added
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation
[] - puppet accept/initial run (with role:spare)
[] - host state in netbox set to staged
<hostname#3>:
[] - receive in system on #procurement task T251189
[] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[] - bios/drac/serial setup/testing
[] - mgmt dns entries added for both asset tag and hostname
[] - network port setup (description, enable, vlan)
** end on-site specific steps
[] - production dns entries added
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation
[] - puppet accept/initial run (with role:spare)
[] - host state in netbox set to staged
**Once the system(s) above have had all checkbox steps completed, this task can be resolved.**