Change Details

This task will track the #decommission of all old servers at ulsfo. = rack .22 = == cp4023 == [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4025 == [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed == cp4033 == [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - mgmt dns entries removed == cp4035 == [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - mgmt dns entries removed = rack .23 = == cp4022 [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4024 [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4026 [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4028 [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4030 [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4032 [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4034 [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4036 [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed.

This task will track the #decommission of all old servers at ulsfo. = rack .22 = == cp4023 == [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4025 == [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed == cp4033 == [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - mgmt dns entries removed == cp4035 == [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - mgmt dns entries removed = rack .23 = == cp4022 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4024 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4026 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4028 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4030 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4032 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4034 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4036 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed.

This task will track the #decommission of all old servers at ulsfo. = rack .22 = == cp4023 == [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4025 == [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed == cp4033 == [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - mgmt dns entries removed == cp4035 == [] - all system services confirmed offline from production use [] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [] - remove system from all lvs/pybal active configuration [] - any service group puppet/hiera/dsh config removed [] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [] - remove all remaining puppet references and all host entries in the puppet repo [] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - mgmt dns entries removed = rack .23 = == cp4022 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4024 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4026 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4028 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4030 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4032 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4034 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed. == cp4036 [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - system unracked and decommissioned (by onsite), update netbox with result and set state to offline [x] - mgmt dns entries removed.