This task will track the racking, setup, and OS installation of wdqs10[123] ordered via T227755.
== Hostname / Racking / Installation Details ==
== Hostname / Racking / Installation Details ==
**Hostnames:** wdqs1011, wdqs1012, wdqs1013
**Racking Proposal:**
WDQS is composed of 2 independent clusters, nodes in each cluster should be spread across rows as much as possible
Current configuration:
* public cluster:
** wdqs1004: A6
** wdqs1005: D3
** wdqs1006: A1
* private cluster:
** wdqs1003: A4 (to be decommissioned)
** wdqs1007: B1
** wdqs1008: D1
proposed racking for new servers:
* wdqs1011: public cluster, row B or C
* wdqs1012: private cluster, row A
* wdqs1013: private cluster, row C
**Networking/Subnet/IP:** 1G NIC is good enough, same subnet as current servers (private eqiad)
**Partitioning/Raid:** RAID10: raid10-gpt-srv-lvm-ext4-8disks.cfg
== Per host setup checklist ==
Each host should have its own setup checklist copied and pasted into the list below.
wdqs1011:
[] - receive in system on #procurement task T227755
[] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[] - bios/drac/serial setup/testing
[] - mgmt dns entries added for both asset tag and hostname
[] - network port setup (description, enable, vlan)
** end on-site specific steps
[] - production dns entries added
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation
[] - puppet accept/initial run (with role:spare)
[] - host state in netbox set to staged
wdqs1012:
[] - receive in system on #procurement task T227755
[] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[] - bios/drac/serial setup/testing
[] - mgmt dns entries added for both asset tag and hostname
[] - network port setup (description, enable, vlan)
** end on-site specific steps
[] - production dns entries added
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation
[] - puppet accept/initial run (with role:spare)
[] - host state in netbox set to staged
wdqs1013:
[] - receive in system on #procurement task T227755
[] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[] - bios/drac/serial setup/testing
[] - mgmt dns entries added for both asset tag and hostname
[] - network port setup (description, enable, vlan)
** end on-site specific steps
[] - production dns entries added
[] - operations/puppet update (install_server at minimum, other files if possible)
[] - OS installation
[] - puppet accept/initial run (with role:spare)
[] - host state in netbox set to staged
**Once the system(s) above have had all checkbox steps completed, this task can be resolved.**