Change Details

This task will track the racking, setup, and OS installation of an-db100[12].eqiad.wmnet == Hostname / Racking / Installation Details == **Hostnames:** an-db100[12].eqiad.wmnet **Racking Proposal:** any rows are fine, but please rack each of these 2 servers in separate rows. **Networking/Subnet/VLAN/IP:** Analytics VLAN, 1G NIC **Partitioning/Raid:** Not entirely sure, but we need a smallish / partition (100G?) and the rest of the space for /srv. Since Config C is 4 disks, perhaps RAID0 4 dev? **OS Distro:** Buster == Per host setup checklist == Each host should have its own setup checklist copied and pasted into the list below. <hostname#1>: [] - receive in system on #procurement task T286517 & in coupa [] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [] - network port setup via netbox, run homer to commit [] - firmware update (idrac, bios, network, raid controller) [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged **Once the system(s) above have had all checkbox steps completed, this task can be resolved.**

This task will track the racking, setup, and OS installation of an-db100[12].eqiad.wmnet == Hostname / Racking / Installation Details == **Hostnames:** an-db100[12].eqiad.wmnet **Racking Proposal:** any rows are fine, but please rack each of these 2 servers in separate rows. **Networking/Subnet/VLAN/IP:** Analytics VLAN, 1G NIC **Partitioning/Raid:**standard, raid10-4dev **OS Distro:** Buster == Per host setup checklist == Each host should have its own setup checklist copied and pasted into the list below. an-db1001.eqiad.wmnet: [] - receive in system on #procurement task T286517 & in coupa [] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [] - network port setup via netbox, run homer to commit [] - firmware update (idrac, bios, network, raid controller) [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged an-db1002.eqiad.wmnet: [] - receive in system on #procurement task T286517 & in coupa [] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [] - network port setup via netbox, run homer to commit [] - firmware update (idrac, bios, network, raid controller) [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged **Once the system(s) above have had all checkbox steps completed, this task can be resolved.**

This task will track the racking, setup, and OS installation of an-db100[12].eqiad.wmnet == Hostname / Racking / Installation Details == **Hostnames:** an-db100[12].eqiad.wmnet **Racking Proposal:** any rows are fine, but please rack each of these 2 servers in separate rows. **Networking/Subnet/VLAN/IP:** Analytics VLAN, 1G NIC **Partitioning/Raid:** Not entirely sure, but we need a smallish / partition (100G?) and the rest of the space for /srv. Since Config C is 4 disksstandard, perhaps RAID0 4 dev?raid10-4dev **OS Distro:** Buster == Per host setup checklist == Each host should have its own setup checklist copied and pasted into the list below. <hostname#1>an-db1001.eqiad.wmnet: [] - receive in system on #procurement task T286517 & in coupa [] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [] - network port setup via netbox, run homer to commit [] - firmware update (idrac, bios, network, raid controller) [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged an-db1002.eqiad.wmnet: [] - receive in system on #procurement task T286517 & in coupa [] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [] - bios/drac/serial setup/testing [] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox. [] - network port setup via netbox, run homer to commit [] - firmware update (idrac, bios, network, raid controller) [] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm). [] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host [] - host state in netbox set to staged **Once the system(s) above have had all checkbox steps completed, this task can be resolved.**