Papaul,
This cannot be fully completed (other than basic info gathering) until the mx80 for eqdfw (T89227) is completed. Once that is done, then items can be taken to eqdfw. (There seems little reason to go there without the router, since its a peering site.)
We'll need to prepare all the items to go to eqdal (Equnix Dallas.) As this is in Dallas, you'll be the on-site technician for the installation in the equinix facility. We'll get you all setup with access independently of this task. This will just track all the hardware and tools you'll need to bring (and leave) at eqdfw.
Ideally, we want every site to have all the tools and items needed to work/troubleshoot items there. This will result in duplication of items between codfw and eqdfw, but considering they are different facilities, this is fine.
[ ] - mx80 router (configured for eqdfw, not eqord) (T89227 dependent)
[ ] - two CB-12H1-C20 servertech horiztontal PDU (ordered on https://rt.wikimedia.org/Ticket/Display.html?id=8761)
[ ] - half a dozen asset tags (for any future equipment shipped directly to eqdfw)
[ ] - SFP+ / XFP - need to determine how many of each is needed (@faidon / @mark)
[ ] - spare power cable for each device/router/etc
Tools
* We'll either need to purchase and have shipped, or Papaul purchase locally and expense.
** Papaul: Please note next to each item if you prefer to purchase or have me purchase and ship to you. (I imagine shipping to codfw for now is preferred.)
[ ] - MegaPro Electronic bits set screwdriver
[ ] - RJ45 cable stripper
[ ] - RJ45 cable crimpter
[ ] - Cletop fiber cleaning tool